| Message ID | 1341325365-21393-12-git-send-email-andrew@lunn.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jul 3, 2012 at 10:22 AM, Andrew Lunn <andrew@lunn.ch> wrote: > Convert boards using DT, but the old way of configuring SATA to now > use properties in there DT file. Andrew, should I be updating my GoFlex patch set to work with these new Kirkwood DT abstractions, and if so is there a specific tree you'd prefer I work against, or should I wait to see if my existing patch set is approved as is and update with a new patch once these updates land in an RC? Josh Coombs
On Tue, Jul 03, 2012 at 10:52:17AM -0400, Josh Coombs wrote: > On Tue, Jul 3, 2012 at 10:22 AM, Andrew Lunn <andrew@lunn.ch> wrote: > > Convert boards using DT, but the old way of configuring SATA to now > > use properties in there DT file. > > Andrew, should I be updating my GoFlex patch set to work with these > new Kirkwood DT abstractions, and if so is there a specific tree you'd > prefer I work against, or should I wait to see if my existing patch > set is approved as is and update with a new patch once these updates > land in an RC? Hi Josh I would suggest waiting for a day or two. The IRQ and GPIO patch may cause comments and require more work. Unfortunately, without that patch, the rest are pretty useless, since they use IRQs in DT. If there are no show stoppers, Jason has a for-next tree which these patches should get pulled into, and others can use as a basis. Andrew
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index dc09a73..f2a9808 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -26,6 +26,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index c2a5562..10bc819 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index d74d1ae..24de2b5 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -48,6 +48,11 @@ }; }; }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index ada0f0c..f8e2bc6 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -21,6 +21,11 @@ status = "okay"; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + nand@3000000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index e0520c3..9b4ee7d 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -69,5 +69,9 @@ }; }; }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; }; }; diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 58c2d68..179f4b3 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -35,10 +35,6 @@ static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data dnskw_sata_data = { - .n_ports = 2, -}; - static unsigned int dnskw_mpp_config[] __initdata = { MPP13_UART1_TXD, /* Custom ... */ MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ @@ -245,7 +241,6 @@ void __init dnskw_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - kirkwood_sata_init(&dnskw_sata_data); kirkwood_i2c_init(); platform_device_register(&dnskw_button_device); diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index eb0e4d5..e494393 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -43,10 +43,6 @@ static struct mv643xx_eth_platform_data dreamplug_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(1), }; -static struct mv_sata_platform_data dreamplug_sata_data = { - .n_ports = 1, -}; - static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; @@ -103,7 +99,6 @@ void __init dreamplug_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); - kirkwood_sata_init(&dreamplug_sata_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); platform_device_register(&dreamplug_leds); diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index eddf1df..56d198e 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -33,10 +33,6 @@ static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data ib62x0_sata_data = { - .n_ports = 2, -}; - static unsigned int ib62x0_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_NF_IO3, @@ -132,7 +128,6 @@ void __init ib62x0_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - kirkwood_sata_init(&ib62x0_sata_data); platform_device_register(&ib62x0_led_device); platform_device_register(&ib62x0_button_device); if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index 00b79ea..1750e68 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -33,10 +33,6 @@ static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static struct mv_sata_platform_data qnap_ts219_sata_data = { - .n_ports = 2, -}; - static unsigned int qnap_ts219_mpp_config[] __initdata = { MPP0_SPI_SCn, MPP1_SPI_MOSI, @@ -70,7 +66,6 @@ void __init qnap_dt_ts219_init(void) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - kirkwood_sata_init(&qnap_ts219_sata_data); kirkwood_ehci_init(); pm_power_off = qnap_tsx1x_power_off;
Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- arch/arm/boot/dts/kirkwood-dns320.dts | 5 +++++ arch/arm/boot/dts/kirkwood-dns325.dts | 5 +++++ arch/arm/boot/dts/kirkwood-dreamplug.dts | 5 +++++ arch/arm/boot/dts/kirkwood-ib62x0.dts | 5 +++++ arch/arm/boot/dts/kirkwood-ts219.dtsi | 4 ++++ arch/arm/mach-kirkwood/board-dnskw.c | 5 ----- arch/arm/mach-kirkwood/board-dreamplug.c | 5 ----- arch/arm/mach-kirkwood/board-ib62x0.c | 5 ----- arch/arm/mach-kirkwood/board-ts219.c | 5 ----- 9 files changed, 24 insertions(+), 20 deletions(-)