diff mbox

[2/2] ARM: vt8500: Add support for UHCI companion controller

Message ID 1342704684-4858-2-git-send-email-linux@prisktech.co.nz (mailing list archive)
State New, archived
Headers show

Commit Message

Tony Prisk July 19, 2012, 1:31 p.m. UTC
Add support for the UHCI companion controller in arch-vt8500.
This patch is based almost entirely off uhci-grlib.c with
additions for device tree support.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 drivers/usb/host/Kconfig       |    4 +-
 drivers/usb/host/uhci-hcd.c    |    5 +
 drivers/usb/host/uhci-vt8500.c |  158 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 165 insertions(+), 2 deletions(-)
 create mode 100644 drivers/usb/host/uhci-vt8500.c

Comments

Arnd Bergmann July 19, 2012, 2:27 p.m. UTC | #1
On Thursday 19 July 2012, Tony Prisk wrote:
> Add support for the UHCI companion controller in arch-vt8500.
> This patch is based almost entirely off uhci-grlib.c with
> additions for device tree support.
> 
> Signed-off-by: Tony Prisk <linux@prisktech.co.nz>

It looks like this file is basically completely generic, so could you
just call it uhci-of instead so we can use it for all uhci implementations
that have no special requirements?

	Arnd
diff mbox

Patch

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 83e58df..1c4de8f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -450,7 +450,7 @@  config USB_OHCI_LITTLE_ENDIAN
 
 config USB_UHCI_HCD
 	tristate "UHCI HCD (most Intel and VIA) support"
-	depends on USB && (PCI || SPARC_LEON)
+	depends on USB && (PCI || SPARC_LEON || ARCH_VT8500)
 	---help---
 	  The Universal Host Controller Interface is a standard by Intel for
 	  accessing the USB hardware in the PC (which is also called the USB
@@ -468,7 +468,7 @@  config USB_UHCI_HCD
 config USB_UHCI_SUPPORT_NON_PCI_HC
 	bool
 	depends on USB_UHCI_HCD
-	default y if SPARC_LEON
+	default y if (SPARC_LEON || ARCH_VT8500)
 
 config USB_UHCI_BIG_ENDIAN_MMIO
 	bool
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index e4db350..28f885d 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -846,6 +846,11 @@  static const char hcd_name[] = "uhci_hcd";
 #define PLATFORM_DRIVER		uhci_grlib_driver
 #endif
 
+#ifdef CONFIG_ARCH_VT8500
+#include "uhci-vt8500.c"
+#define PLATFORM_DRIVER		uhci_vt8500_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
 #error "missing bus glue for uhci-hcd"
 #endif
diff --git a/drivers/usb/host/uhci-vt8500.c b/drivers/usb/host/uhci-vt8500.c
new file mode 100644
index 0000000..d349c82
--- /dev/null
+++ b/drivers/usb/host/uhci-vt8500.c
@@ -0,0 +1,158 @@ 
+/*
+ * UHCI HCD (Host Controller Driver) for VT8500/WM8505/WM8650
+ *
+ * Copyright (c) 2011 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This file is based on uhci-grlib.c
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static int uhci_vt8500_init(struct usb_hcd *hcd)
+{
+	struct uhci_hcd *uhci = hcd_to_uhci(hcd);
+
+	uhci->rh_numports = uhci_count_ports(hcd);
+
+	/* Set up pointers to to generic functions */
+	uhci->reset_hc = uhci_generic_reset_hc;
+	uhci->check_and_reset_hc = uhci_generic_check_and_reset_hc;
+
+	/* No special actions need to be taken for the functions below */
+	uhci->configure_hc = NULL;
+	uhci->resume_detect_interrupts_are_broken = NULL;
+	uhci->global_suspend_mode_is_broken = NULL;
+
+	/* Reset if the controller isn't already safely quiescent. */
+	check_and_reset_hc(uhci);
+	return 0;
+}
+
+static const struct hc_driver uhci_vt8500_hc_driver = {
+	.description =		hcd_name,
+	.product_desc =		"WonderMedia UHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct uhci_hcd),
+
+	/* Generic hardware linkage */
+	.irq =			uhci_irq,
+	.flags =		HCD_MEMORY | HCD_USB11,
+
+	/* Basic lifecycle operations */
+	.reset =		uhci_vt8500_init,
+	.start =		uhci_start,
+#ifdef CONFIG_PM
+	.pci_suspend =		NULL,
+	.pci_resume =		NULL,
+	.bus_suspend =		uhci_rh_suspend,
+	.bus_resume =		uhci_rh_resume,
+#endif
+	.stop =			uhci_stop,
+
+	.urb_enqueue =		uhci_urb_enqueue,
+	.urb_dequeue =		uhci_urb_dequeue,
+
+	.endpoint_disable =	uhci_hcd_endpoint_disable,
+	.get_frame_number =	uhci_hcd_get_frame_number,
+
+	.hub_status_data =	uhci_hub_status_data,
+	.hub_control =		uhci_hub_control,
+};
+
+
+static int __devinit uhci_hcd_vt8500_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct uhci_hcd	*uhci;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	hcd = usb_create_hcd(&uhci_vt8500_hc_driver, &pdev->dev,
+			pdev->name);
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_err("%s: request_mem_region failed\n", __func__);
+		ret = -EBUSY;
+		goto err_rmr;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_err("%s: ioremap failed\n", __func__);
+		ret = -ENOMEM;
+		goto err_irq;
+	}
+
+	uhci = hcd_to_uhci(hcd);
+
+	uhci->regs = hcd->regs;
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED |
+								IRQF_SHARED);
+	if (ret)
+		goto err_uhci;
+
+	return 0;
+
+err_uhci:
+	iounmap(hcd->regs);
+err_irq:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static int uhci_hcd_vt8500_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/* Make sure the controller is quiescent and that we're not using it
+ * any more.  This is mainly for the benefit of programs which, like kexec,
+ * expect the hardware to be idle: not doing DMA or generating IRQs.
+ *
+ * This routine may be called in a damaged or failing kernel.  Hence we
+ * do not acquire the spinlock before shutting down the controller.
+ */
+static void uhci_hcd_vt8500_shutdown(struct platform_device *op)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+	uhci_hc_died(hcd_to_uhci(hcd));
+}
+
+static const struct of_device_id vt8500_uhci_ids[] = {
+	{ .compatible = "via,vt8500-uhci", },
+	{ .compatible = "wm,prizm-uhci", },
+	{}
+};
+
+static struct platform_driver uhci_vt8500_driver = {
+	.probe		= uhci_hcd_vt8500_probe,
+	.remove		= uhci_hcd_vt8500_remove,
+	.shutdown	= uhci_hcd_vt8500_shutdown,
+	.driver = {
+		.name = "vt8500-uhci",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(vt8500_uhci_ids),
+	},
+};