@@ -374,6 +374,180 @@ static struct vpfe_config vpfe_cfg = {
.ccdc = "ISIF",
};
+#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standards timings */
+static struct vpbe_enc_mode_info dm365evm_enc_std_timing[] = {
+ {
+ .name = "ntsc",
+ .timings_type = VPBE_ENC_STD,
+ .timings = {V4L2_STD_525_60},
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {11, 10},
+ .fps = {30000, 1001},
+ .left_margin = 0x79,
+ .right_margin = 0,
+ .upper_margin = 0x10,
+ .lower_margin = 0,
+ .hsync_len = 0,
+ .vsync_len = 0,
+ .flags = 0,
+ },
+ {
+ .name = "pal",
+ .timings_type = VPBE_ENC_STD,
+ .timings = {V4L2_STD_625_50},
+ .interlaced = 1,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {54, 59},
+ .fps = {25, 1},
+ .left_margin = 0x7E,
+ .right_margin = 0,
+ .upper_margin = 0x16,
+ .lower_margin = 0,
+ .hsync_len = 0,
+ .vsync_len = 0,
+ .flags = 0,
+ },
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info dm365evm_enc_preset_timing[] = {
+ {
+ .name = "480p59_94",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_480P59_94},
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 480,
+ .aspect = {1, 1},
+ .fps = {5994, 100},
+ .left_margin = 0x8F,
+ .right_margin = 0,
+ .upper_margin = 0x2D,
+ .lower_margin = 0,
+ .hsync_len = 0,
+ .vsync_len = 0,
+ .flags = 0,
+ },
+ {
+ .name = "576p50",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_576P50},
+ .interlaced = 0,
+ .xres = 720,
+ .yres = 576,
+ .aspect = {1, 1},
+ .fps = {50, 1},
+ .left_margin = 0x8C,
+ .right_margin = 0,
+ .upper_margin = 0x36,
+ .lower_margin = 0,
+ .hsync_len = 0,
+ .vsync_len = 0,
+ .flags = 0,
+ },
+ {
+ .name = "720p60",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_720P60},
+ .interlaced = 0,
+ .xres = 1280,
+ .yres = 720,
+ .aspect = {1, 1},
+ .fps = {60, 1},
+ .left_margin = 0x117,
+ .right_margin = 70,
+ .upper_margin = 38,
+ .lower_margin = 3,
+ .hsync_len = 80,
+ .vsync_len = 5,
+ .flags = 0,
+ },
+ {
+ .name = "1080i30",
+ .timings_type = VPBE_ENC_DV_PRESET,
+ .timings = {V4L2_DV_1080I30},
+ .interlaced = 1,
+ .xres = 1920,
+ .yres = 1080,
+ .aspect = {1, 1},
+ .fps = {30, 1},
+ .left_margin = 0xc9,
+ .right_margin = 80,
+ .upper_margin = 30,
+ .lower_margin = 3,
+ .hsync_len = 88,
+ .vsync_len = 5,
+ .flags = 0,
+ },
+};
+
+/*
+ * The outputs available from VPBE + ecnoders. Keep the
+ * the order same as that of encoders. First those from venc followed by that
+ * from encoders. Index in the outpuvpbe-t refers to index on a particular
+ * encoder.Driver uses this index to pass it to encoder when it supports more
+ * than one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm365evm_vpbe_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = VENC_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "ntsc",
+ .num_modes = ARRAY_SIZE(dm365evm_enc_std_timing),
+ .modes = dm365evm_enc_std_timing,
+ .if_params = V4L2_MBUS_FMT_FIXED,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "Component",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_PRESETS,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "480p59_94",
+ .num_modes = ARRAY_SIZE(dm365evm_enc_preset_timing),
+ .modes = dm365evm_enc_preset_timing,
+ .if_params = V4L2_MBUS_FMT_FIXED,
+ },
+};
+
+/*
+ * Amplifiers on the board
+ */
+static struct amp_config_info vpbe_amp = {
+ .module_name = "ths7303",
+ .is_i2c = 1,
+ .board_info = {
+ I2C_BOARD_INFO("ths7303", 0x2c)
+ }
+};
+
+static struct vpbe_config dm365evm_display_cfg = {
+ .module_name = "dm365-vpbe-display",
+ .i2c_adapter_id = 1,
+ .amp = &vpbe_amp,
+ .osd = {
+ .module_name = VPBE_OSD_SUBDEV_NAME,
+ },
+ .venc = {
+ .module_name = VPBE_VENC_SUBDEV_NAME,
+ },
+ .num_outputs = ARRAY_SIZE(dm365evm_vpbe_outputs),
+ .outputs = dm365evm_vpbe_outputs,
+};
+
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
@@ -595,7 +769,7 @@ static __init void dm365_evm_init(void)
davinci_setup_mmc(0, &dm365evm_mmc_config);
- dm365_init_video(&vpfe_cfg, NULL);
+ dm365_init_video(&vpfe_cfg, &dm365evm_display_cfg);
/* maybe setup mmc1/etc ... _after_ mmc0 */
evm_init_cpld();