diff mbox

I2C: MV64XYZ: Add Device Tree support

Message ID 1342954295-13279-1-git-send-email-andrew@lunn.ch (mailing list archive)
State New, archived
Headers show

Commit Message

Andrew Lunn July 22, 2012, 10:51 a.m. UTC
Extends the driver to get properties from device tree. Rather than
pass the N & M factors in DT, use the more standard clock-frequency
property. Calculate N & M at run time. In order to do this, we need to
know tclk. So the driver uses clk_get() etc in order to get the clock
and clk_get_rate() to determine the tclk rate. Not all platforms
however have CLK, so some #ifdefery is needed to ensure the driver
still compiles when CLK is not available.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---

- Replaced the timeout property in DT, with a hard coded 1 second.
- Put all the OF code together.
- Split the ARM parts from the driver itself.
- Dropped Sebastian Hesselbarth Acked-by, since the changes are not trivial.
- Change MV64XXX to MV64XYZ in the Subject to try to get it past the list
  spam filter.
- return -ENODEV and else if comments from Wolfram.
- Rebased on i2c-embedded/for-next

 Documentation/devicetree/bindings/i2c/mrvl-i2c.txt |   19 ++-
 drivers/i2c/busses/i2c-mv64xxx.c                   |  134 +++++++++++++++++++-
 2 files changed, 147 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
index b891ee2..0f79450 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -1,4 +1,4 @@ 
-* I2C
+* Marvell MMP I2C controller
 
 Required properties :
 
@@ -32,3 +32,20 @@  Examples:
 		interrupts = <58>;
 	};
 
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device
+ - compatible      : Should be "marvell,mv64xxx-i2c"
+ - interrupts      : The interrupt number
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Examples:
+
+	i2c@11000 {
+		compatible = "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 6e70eea..3d53f4e 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -18,6 +18,11 @@ 
 #include <linux/mv643xx_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_i2c.h>
+#include <linux/clk.h>
+#include <linux/err.h>
 
 /* Register defines */
 #define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00
@@ -98,6 +103,9 @@  struct mv64xxx_i2c_data {
 	int			rc;
 	u32			freq_m;
 	u32			freq_n;
+#if defined(CONFIG_HAVE_CLK)
+	struct clk              *clk;
+#endif
 	wait_queue_head_t	waitq;
 	spinlock_t		lock;
 	struct i2c_msg		*msg;
@@ -521,6 +529,83 @@  mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
 	drv_data->reg_base_p = 0;
 }
 
+#ifdef CONFIG_OF
+static int __devinit
+mv64xxx_calc_freq(const int tclk, const int n, const int m)
+{
+	return tclk / (10 * (m + 1) * (2 << n));
+}
+
+static bool __devinit
+mv64xxx_find_baud_factors(const int req_freq, const int tclk, int *best_n,
+			  int *best_m)
+{
+	int freq, delta, best_delta = INT_MAX;
+	int m, n;
+
+	for (n = 0; n <= 7; n++)
+		for (m = 0; m <= 15; m++) {
+			freq = mv64xxx_calc_freq(tclk, n, m);
+			delta = req_freq - freq;
+			if (delta >= 0 && delta < best_delta) {
+				*best_m = m;
+				*best_n = n;
+				best_delta = delta;
+			}
+			if (best_delta == 0)
+				return true;
+		}
+	if (best_delta == INT_MAX)
+		return false;
+	return true;
+}
+
+static int __devinit
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+		  struct device_node *np)
+{
+	int bus_freq;
+	int tclk;
+	int rc = 0;
+
+	/* CLK is mandatory when using DT to describe the i2c bus. We
+	 * need to know tclk in order to calculate bus clock
+	 * factors.
+	 */
+#if !defined(CONFIG_HAVE_CLK)
+	/* Have OF but no CLK */
+	return -ENODEV;
+#else
+	if (IS_ERR(drv_data->clk)) {
+		rc = -ENODEV;
+		goto out;
+	}
+	tclk = clk_get_rate(drv_data->clk);
+	of_property_read_u32(np, "clock-frequency", &bus_freq);
+	if (!mv64xxx_find_baud_factors(bus_freq, tclk,
+				       &drv_data->freq_n, &drv_data->freq_m)) {
+		rc = -EINVAL;
+		goto out;
+	}
+	drv_data->irq = irq_of_parse_and_map(np, 0);
+
+	/* Its not yet defined how timeouts will be specified in device tree.
+	 * So hard code the value to 1 second.
+	 */
+	drv_data->adapter.timeout = HZ;
+out:
+	return rc;
+#endif
+}
+#else /* CONFIG_OF */
+static int __devinit
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+		  struct device_node *np)
+{
+	return -ENODEV;
+}
+#endif /* CONFIG_OF */
+
 static int __devinit
 mv64xxx_i2c_probe(struct platform_device *pd)
 {
@@ -528,7 +613,7 @@  mv64xxx_i2c_probe(struct platform_device *pd)
 	struct mv64xxx_i2c_pdata	*pdata = pd->dev.platform_data;
 	int	rc;
 
-	if (!pdata)
+	if ((!pdata && !pd->dev.of_node))
 		return -ENODEV;
 
 	drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
@@ -546,19 +631,35 @@  mv64xxx_i2c_probe(struct platform_device *pd)
 	init_waitqueue_head(&drv_data->waitq);
 	spin_lock_init(&drv_data->lock);
 
-	drv_data->freq_m = pdata->freq_m;
-	drv_data->freq_n = pdata->freq_n;
-	drv_data->irq = platform_get_irq(pd, 0);
+#if defined(CONFIG_HAVE_CLK)
+	/* Not all platforms have a clk */
+	drv_data->clk = clk_get(&pd->dev, NULL);
+	if (!IS_ERR(drv_data->clk)) {
+		clk_prepare(drv_data->clk);
+		clk_enable(drv_data->clk);
+	}
+#endif
+	if (pdata) {
+		drv_data->freq_m = pdata->freq_m;
+		drv_data->freq_n = pdata->freq_n;
+		drv_data->irq = platform_get_irq(pd, 0);
+		drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+	} else if (pd->dev.of_node) {
+		rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
+		if (rc)
+			goto exit_unmap_regs;
+	}
 	if (drv_data->irq < 0) {
 		rc = -ENXIO;
 		goto exit_unmap_regs;
 	}
+
 	drv_data->adapter.dev.parent = &pd->dev;
 	drv_data->adapter.algo = &mv64xxx_i2c_algo;
 	drv_data->adapter.owner = THIS_MODULE;
 	drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
-	drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
 	drv_data->adapter.nr = pd->id;
+	drv_data->adapter.dev.of_node = pd->dev.of_node;
 	platform_set_drvdata(pd, drv_data);
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
 
@@ -577,11 +678,20 @@  mv64xxx_i2c_probe(struct platform_device *pd)
 		goto exit_free_irq;
 	}
 
+	of_i2c_register_devices(&drv_data->adapter);
+
 	return 0;
 
 	exit_free_irq:
 		free_irq(drv_data->irq, drv_data);
 	exit_unmap_regs:
+#if defined(CONFIG_HAVE_CLK)
+	/* Not all platforms have a clk */
+	if (!IS_ERR(drv_data->clk)) {
+		clk_disable(drv_data->clk);
+		clk_unprepare(drv_data->clk);
+	}
+#endif
 		mv64xxx_i2c_unmap_regs(drv_data);
 	exit_kfree:
 		kfree(drv_data);
@@ -597,17 +707,31 @@  mv64xxx_i2c_remove(struct platform_device *dev)
 	rc = i2c_del_adapter(&drv_data->adapter);
 	free_irq(drv_data->irq, drv_data);
 	mv64xxx_i2c_unmap_regs(drv_data);
+#if defined(CONFIG_HAVE_CLK)
+	/* Not all platforms have a clk */
+	if (!IS_ERR(drv_data->clk)) {
+		clk_disable(drv_data->clk);
+		clk_unprepare(drv_data->clk);
+	}
+#endif
 	kfree(drv_data);
 
 	return rc;
 }
 
+static const struct of_device_id mv64xxx_i2c_of_match_table[] __devinitdata = {
+	{ .compatible = "marvell,mv64xxx-i2c", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
+
 static struct platform_driver mv64xxx_i2c_driver = {
 	.probe	= mv64xxx_i2c_probe,
 	.remove	= __devexit_p(mv64xxx_i2c_remove),
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= MV64XXX_I2C_CTLR_NAME,
+		.of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table),
 	},
 };