From patchwork Mon Jul 30 07:22:24 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Schocher X-Patchwork-Id: 1253451 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id 64D34DFE76 for ; Mon, 30 Jul 2012 07:28:15 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1SvkKA-0003UQ-92; Mon, 30 Jul 2012 07:23:30 +0000 Received: from mail-out.m-online.net ([212.18.0.9]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1SvkJG-0003MD-Lw; Mon, 30 Jul 2012 07:22:35 +0000 Received: from frontend1.mail.m-online.net (unknown [192.168.8.180]) by mail-out.m-online.net (Postfix) with ESMTP id 3WlsgB6gywz4KK7N; Mon, 30 Jul 2012 09:22:30 +0200 (CEST) Received: from localhost (dynscan1.mnet-online.de [192.168.6.68]) by mail.m-online.net (Postfix) with ESMTP id 3WlsgB68BKzbblQ; Mon, 30 Jul 2012 09:22:30 +0200 (CEST) X-Virus-Scanned: amavisd-new at mnet-online.de Received: from mail.mnet-online.de ([192.168.8.180]) by localhost (dynscan1.mail.m-online.net [192.168.6.68]) (amavisd-new, port 10024) with ESMTP id obzscBpRJlZ4; Mon, 30 Jul 2012 09:22:26 +0200 (CEST) X-Auth-Info: YtT5gIlORYSalU/ZGKCNZ8U0d4obaU8A+FOlKGkoE9w= Received: from mail.denx.de (host-82-135-33-74.customer.m-online.net [82.135.33.74]) by smtp-auth.mnet-online.de (Postfix) with ESMTPA; Mon, 30 Jul 2012 09:22:26 +0200 (CEST) Received: from pollux.denx.de (pollux [192.168.1.1]) by mail.denx.de (Postfix) with ESMTP id 39CAA24008B; Mon, 30 Jul 2012 09:22:26 +0200 (CEST) Received: by pollux.denx.de (Postfix, from userid 515) id 219B9327EDA; Mon, 30 Jul 2012 09:22:26 +0200 (CEST) From: Heiko Schocher To: davinci-linux-open-source@linux.davincidsp.com Subject: [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller Date: Mon, 30 Jul 2012 09:22:24 +0200 Message-Id: <1343632944-25971-1-git-send-email-hs@denx.de> X-Mailer: git-send-email 1.7.7.6 X-Spam-Note: CRM114 invocation failed X-Spam-Note: SpamAssassin invocation failed Cc: Wolfgang Denk , devicetree-discuss@lists.ozlabs.org, Sekhar Nori , Grant Likely , linux-mtd@lists.infradead.org, Scott Wood , Heiko Schocher , David Woodhouse , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org add OF support for the davinci nand controller. Signed-off-by: Heiko Schocher Cc: davinci-linux-open-source@linux.davincidsp.com Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-mtd@lists.infradead.org Cc: David Woodhouse Cc: Grant Likely Cc: Sekhar Nori Cc: Wolfgang Denk Cc: Scott Wood Acked-by: Sekhar Nori --- - changes for v2: - add comments from Scott Wood: - add "ti,davinci-" prefix - Dashes are preferred to underscores - rename "nandflash" to "nand" - introduce new "ti,davinci" specific properties for setting up ecc_mode, ecc_bits, options and bbt options, instead using linux defines - readme fixes - no changes for v3 - changes for v4 remove "pinmux-handle" property as discussed here: http://www.spinics.net/lists/arm-kernel/msg175701.html with Nori Sekhar - no changes for v5 - changes for v6: add comments from Sekhar Nori: - remove unnecessary includes - use devm_kzalloc instead of kzalloc - remove AEMIF timing specific bindings, as this has to be done later. .../devicetree/bindings/arm/davinci/nand.txt | 51 ++++++++++++++ drivers/mtd/nand/davinci_nand.c | 72 +++++++++++++++++++- 2 files changed, 122 insertions(+), 1 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/davinci/nand.txt diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt new file mode 100644 index 0000000..e37241f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt @@ -0,0 +1,51 @@ +* Texas Instruments Davinci NAND + +This file provides information, what the device node for the +davinci nand interface contain. + +Required properties: +- compatible: "ti,davinci-nand"; +- reg : contain 2 offset/length values: + - offset and length for the access window + - offset and length for accessing the aemif control registers +- ti,davinci-chipselect: Indicates on the davinci_nand driver which + chipselect is used for accessing the nand. + +Recommended properties : +- ti,davinci-mask-ale: mask for ale +- ti,davinci-mask-cle: mask for cle +- ti,davinci-mask-chipsel: mask for chipselect +- ti,davinci-ecc-mode: ECC mode valid values for davinci driver: + - "none" + - "soft" + - "hw" +- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4. +- ti,davinci-nand-buswidth: buswidth 8 or 16 +- ti,davinci-nand-use-bbt: use flash based bad block table support. + +Example (enbw_cmc board): +aemif@60000000 { + compatible = "ti,davinci-aemif"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x68000000 0x80000>; + ranges = <2 0 0x60000000 0x02000000 + 3 0 0x62000000 0x02000000 + 4 0 0x64000000 0x02000000 + 5 0 0x66000000 0x02000000 + 6 0 0x68000000 0x02000000>; + nand@3,0 { + compatible = "ti,davinci-nand"; + reg = <3 0x0 0x807ff + 6 0x0 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + }; +}; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index d94b03c..f386b3c 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -518,9 +519,75 @@ static struct nand_ecclayout hwecc4_2048 __initconst = { }, }; +#if defined(CONFIG_OF) +static const struct of_device_id davinci_nand_of_match[] = { + {.compatible = "ti,davinci-nand", }, + {}, +} +MODULE_DEVICE_TABLE(of, davinci_nand_of_match); + +static struct davinci_nand_pdata + *nand_davinci_get_pdata(struct platform_device *pdev) +{ + if (!pdev->dev.platform_data && pdev->dev.of_node) { + struct davinci_nand_pdata *pdata; + const char *mode; + u32 prop; + int len; + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct davinci_nand_pdata), + GFP_KERNEL); + pdev->dev.platform_data = pdata; + if (!pdata) + return NULL; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-chipselect", &prop)) + pdev->id = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-mask-ale", &prop)) + pdata->mask_ale = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-mask-cle", &prop)) + pdata->mask_cle = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-mask-chipsel", &prop)) + pdata->mask_chipsel = prop; + if (!of_property_read_string(pdev->dev.of_node, + "ti,davinci-ecc-mode", &mode)) { + if (!strncmp("none", mode, 4)) + pdata->ecc_mode = NAND_ECC_NONE; + if (!strncmp("soft", mode, 4)) + pdata->ecc_mode = NAND_ECC_SOFT; + if (!strncmp("hw", mode, 2)) + pdata->ecc_mode = NAND_ECC_HW; + } + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-ecc-bits", &prop)) + pdata->ecc_bits = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-nand-buswidth", &prop)) + if (prop == 16) + pdata->options |= NAND_BUSWIDTH_16; + if (of_find_property(pdev->dev.of_node, + "ti,davinci-nand-use-bbt", &len)) + pdata->bbt_options = NAND_BBT_USE_FLASH; + } + + return pdev->dev.platform_data; +} +#else +#define davinci_nand_of_match NULL +static struct davinci_nand_pdata + *nand_davinci_get_pdata(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} +#endif + static int __init nand_davinci_probe(struct platform_device *pdev) { - struct davinci_nand_pdata *pdata = pdev->dev.platform_data; + struct davinci_nand_pdata *pdata; struct davinci_nand_info *info; struct resource *res1; struct resource *res2; @@ -530,6 +597,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) uint32_t val; nand_ecc_modes_t ecc_mode; + pdata = nand_davinci_get_pdata(pdev); /* insist on board-specific configuration */ if (!pdata) return -ENODEV; @@ -816,6 +884,8 @@ static struct platform_driver nand_davinci_driver = { .remove = __exit_p(nand_davinci_remove), .driver = { .name = "davinci_nand", + .owner = THIS_MODULE, + .of_match_table = davinci_nand_of_match, }, }; MODULE_ALIAS("platform:davinci_nand");