[19/22] ARM: recreate kernel mappings in early_paging_init()

Commit Message

Cyril Chemparathy July 31, 2012, 11:04 p.m. UTC

This patch adds a step in the init sequence, in order to recreate the kernel
code/data page table mappings prior to full paging initialization.  This is
necessary on LPAE systems that run out of a physical address space outside the
4G limit.  On these systems, this implementation provides a machine descriptor
hook that allows the PHYS_OFFSET to be overridden in a machine specific
fashion.

Signed-off-by: Cyril Chemparathy <[e-mail]>
Signed-off-by: Vitaly Andrianov <[e-mail]>
---
 arch/arm/include/asm/mach/arch.h |    1 +
 arch/arm/kernel/setup.c          |    3 ++
 arch/arm/mm/mmu.c                |   57 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+)

Patch

diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 0b1c94b..2b9ecc5 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -37,6 +37,7 @@  struct machine_desc {
 	char			restart_mode;	/* default restart mode	*/
 	void			(*fixup)(struct tag *, char **,
 					 struct meminfo *);
+	void			(*init_meminfo)(void);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_early)(void);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bba3fdc..ccf052c 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -93,6 +93,7 @@  static int __init fpe_setup(char *line)
 __setup("fpe=", fpe_setup);
 #endif
 
+extern void early_paging_init(struct machine_desc *, struct proc_info_list *);
 extern void paging_init(struct machine_desc *desc);
 extern void sanity_check_meminfo(void);
 extern void reboot_setup(char *str);
@@ -1152,6 +1153,8 @@  void __init setup_arch(char **cmdline_p)
 	parse_early_param();
 
 	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]), meminfo_cmp, NULL);
+
+	early_paging_init(mdesc, lookup_processor_type(read_cpuid_id()));
 	sanity_check_meminfo();
 	arm_memblock_init(&meminfo, mdesc);
 
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6b0baf3..21fb171 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -28,6 +28,7 @@ 
 #include <asm/highmem.h>
 #include <asm/system_info.h>
 #include <asm/traps.h>
+#include <asm/procinfo.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -1175,6 +1176,62 @@  static void __init map_lowmem(void)
 }
 
 /*
+ * early_paging_init() recreates boot time page table setup, allowing machines
+ * to switch over to a high (>4G) address space on LPAE systems
+ */
+void __init early_paging_init(struct machine_desc *mdesc,
+			      struct proc_info_list *procinfo)
+{
+	bool lpae = IS_ENABLED(CONFIG_ARM_LPAE);
+	pmdval_t pmdprot = procinfo->__cpu_mm_mmu_flags;
+	unsigned long map_start, map_end;
+	pgd_t *pgd0, *pgdk;
+	pud_t *pud0, *pudk;
+	pmd_t *pmd0, *pmdk;
+	phys_addr_t phys;
+	int i;
+
+	if (!lpae)
+		return;
+
+	/* remap kernel code and data */
+	map_start = init_mm.start_code;
+	map_end   = init_mm.brk;
+
+	/* get a handle on things... */
+	pgd0 = pgd_offset_k(0);
+	pud0 = pud_offset(pgd0, 0);
+	pmd0 = pmd_offset(pud0, 0);
+
+	pgdk = pgd_offset_k(map_start);
+	pudk = pud_offset(pgdk, map_start);
+	pmdk = pmd_offset(pudk, map_start);
+
+	phys = PHYS_OFFSET;
+
+	if (mdesc->init_meminfo)
+		mdesc->init_meminfo();
+
+	/* remap level 1 table */
+	for (i = 0; i < PTRS_PER_PGD; i++) {
+		*pud0++ = __pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER);
+		pmd0 += PTRS_PER_PMD;
+	}
+
+	/* remap pmds for kernel mapping */
+	phys = __pa(map_start) & PMD_MASK;
+	do {
+		*pmdk++ = __pmd(phys | pmdprot);
+		phys += PMD_SIZE;
+	} while (phys < map_end);
+
+	flush_cache_all();
+	cpu_set_ttbr(0, __pa(pgd0));
+	cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET);
+	local_flush_tlb_all();
+}
+
+/*
  * paging_init() sets up the page tables, initialises the zone memory
  * maps, and sets up the zero page, bad page and bad page tables.
  */