| Message ID | 1344146488-9496-4-git-send-email-shawn.guo@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Aug 5, 2012 at 8:01 AM, Shawn Guo <shawn.guo@linaro.org> wrote: > Add alias for gpio nodes, so that gpio driver can identify the port > number and then specify a sensible gpio base rather than using the > one dynamically allocated by gpio core. > > Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Applied. Thanks, Linus Walleij
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 00bae3a..5303ab6 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -19,6 +19,12 @@ serial3 = &uart4; serial4 = &uart5; serial5 = &uart6; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; }; avic: avic-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 53cbaa3..aba28dc 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -17,6 +17,10 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; }; tzic: tz-interrupt-controller@e0000000 { diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index fc79cdc..cd37165 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; tzic: tz-interrupt-controller@0fffc000 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 3d3c64b..fd57079 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -19,6 +19,13 @@ serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; }; cpus {
Add alias for gpio nodes, so that gpio driver can identify the port number and then specify a sensible gpio base rather than using the one dynamically allocated by gpio core. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/boot/dts/imx27.dtsi | 6 ++++++ arch/arm/boot/dts/imx51.dtsi | 4 ++++ arch/arm/boot/dts/imx53.dtsi | 7 +++++++ arch/arm/boot/dts/imx6q.dtsi | 7 +++++++ 4 files changed, 24 insertions(+), 0 deletions(-)