| Message ID | 1344177973-6505-2-git-send-email-sebastian.hesselbarth@googlemail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sun, Aug 05, 2012 at 04:46:13PM +0200, Sebastian Hesselbarth wrote: > This adds the corresponding device tree descriptor for the > Seagate FreeAgent Dockstar based on Kirkwood DT. > > Please note that this patch requires the mach-kirkwood Makefile.boot typo > fix to fully apply. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> > Cc: Jason Cooper <jason@lakedaemon.net> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- ... > diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot > index a571755..2c2edfb 100644 > --- a/arch/arm/mach-kirkwood/Makefile.boot > +++ b/arch/arm/mach-kirkwood/Makefile.boot > @@ -11,3 +11,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb This series looks great, but will go in after the above line is fixed. Can you correct and resubmit so we don't get a conflict down the road? You can just do a v2 of this patch in-reply-to this one. thx, Jason.
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts new file mode 100644 index 0000000..08a5824 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + }; +}; diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a571755..2c2edfb 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -11,3 +11,4 @@ dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb +dtb-$(CONFIG_MACH_DOCKSTAR_DT) += kirkwood-dockstar.dtb
This adds the corresponding device tree descriptor for the Seagate FreeAgent Dockstar based on Kirkwood DT. Please note that this patch requires the mach-kirkwood Makefile.boot typo fix to fully apply. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/kirkwood-dockstar.dts | 57 +++++++++++++++++++++++++++++++ arch/arm/mach-kirkwood/Makefile.boot | 1 + 2 files changed, 58 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-dockstar.dts