@@ -15,6 +15,13 @@ config MACH_CM_A510
Say 'Y' here if you want your kernel to support the
CompuLab CM-A510 Board.
+config MACH_DOVE_DT
+ bool "Marvell Dove Flattened Device Tree"
+ select USE_OF
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell Dove using flattened device tree.
+
endmenu
endif
@@ -17,6 +17,8 @@
#include <linux/ata_platform.h>
#include <linux/gpio.h>
#include <linux/mv643xx_i2c.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/timex.h>
@@ -30,6 +32,7 @@
#include <asm/mach/arch.h>
#include <linux/irq.h>
#include <plat/time.h>
+#include <plat/irq.h>
#include <plat/ehci-orion.h>
#include <plat/common.h>
#include <plat/addr-map.h>
@@ -384,3 +387,67 @@ void dove_restart(char mode, const char *cmd)
while (1)
;
}
+
+#if defined(CONFIG_MACH_DOVE_DT)
+/*
+ * Auxdata required until real OF clock provider
+ */
+struct of_dev_auxdata dove_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+ OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL),
+ OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+ OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+ NULL),
+ OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL),
+ OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL),
+ OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL),
+ {},
+};
+
+static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static void __init dove_dt_init(void)
+{
+ pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
+ (dove_tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+ tauros2_init();
+#endif
+ dove_setup_cpu_mbus();
+
+ /* Setup root of clk tree */
+ dove_clk_init();
+
+ /* Internal devices not ported to DT yet */
+ dove_rtc_init();
+ dove_xor0_init();
+ dove_xor1_init();
+
+ dove_ge00_init(&dove_dt_ge00_data);
+ dove_ehci0_init();
+ dove_ehci1_init();
+ dove_pcie_init(1, 1);
+ dove_crypto_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ dove_auxdata_lookup, NULL);
+}
+
+static const char * const dove_dt_board_compat[] = {
+ "marvell,dove",
+ NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
+ .map_io = dove_map_io,
+ .init_early = dove_init_early,
+ .init_irq = orion_dt_init_irq,
+ .timer = &dove_timer,
+ .init_machine = dove_dt_init,
+ .restart = dove_restart,
+ .dt_compat = dove_dt_board_compat,
+MACHINE_END
+#endif
This adds a generic DT_MACHINE for mach-dove. As with other orion based SoCs there still is some glue code required to make all internal devices work, i.e. auxdata is provided to pass clocks to corresponding device drivers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Ian Molton <ian.molton@codethink.co.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Maen Suleiman <maen@marvell.com> Cc: Olof Johansson <olof@lixom.net> --- arch/arm/mach-dove/Kconfig | 7 +++++ arch/arm/mach-dove/common.c | 67 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 74 insertions(+)