diff mbox

[3/4] arm/dts: exynos4: Add DTS file for ODROID-X

Message ID 1344366725-19153-1-git-send-email-dongjin.kim@agreeyamobility.net (mailing list archive)
State New, archived
Headers show

Commit Message

Dongjin Kim Aug. 7, 2012, 7:12 p.m. UTC
This patch create a DTS file for ODROID-X, it desribes PMIC max77686 and LED
gpios base.

Signed-off-by: Dongjin Kim <dongjin.kim@agreeyamobility.net>
---
 arch/arm/boot/dts/exynos4412-odroidx.dts |  148 ++++++++++++++++++++++++++++++
 1 file changed, 148 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts

Comments

Thomas Abraham Aug. 8, 2012, 3:47 a.m. UTC | #1
On 8 August 2012 00:42, Dongjin Kim <tobetter@gmail.com> wrote:
> This patch create a DTS file for ODROID-X, it desribes PMIC max77686 and LED
> gpios base.
>
> Signed-off-by: Dongjin Kim <dongjin.kim@agreeyamobility.net>
> ---
>  arch/arm/boot/dts/exynos4412-odroidx.dts |  148 ++++++++++++++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> new file mode 100644
> index 0000000..b0a892b
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -0,0 +1,148 @@
> +/*
> + * Samsung's Exynos4210 based Origen board device tree source
> + *
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + *             http://www.samsung.com
> + * Copyright (c) 2010-2011 Linaro Ltd.
> + *             www.linaro.org
> + *
> + * Device tree source file for Insignal's Origen board which is based on
> + * Samsung's Exynos4210 SoC.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +/include/ "exynos4412.dtsi"
> +/include/ "max77686.dtsi"
> +
> +/ {
> +       model = "Hardkernel ODROID-X evaluation board based on Exynos4412";
> +       compatible = "hardkernel,odroidx", "samsung,exynos4412";

The compatible value "samsung,exynos4412" can be added to the
compatible list in mach-exynos4-dt.c file. Otherwise, this looks fine.

Thanks,
Thomas.

> +
> +       memory {
> +               reg = <0x40000000 0x40000000>;
> +       };
> +
> +       chosen {
> +               bootargs = "root=/dev/mmcblk0p1 init=/sbin/init console=ttySAC1,115200 console=tty1 rootdalay=2";
> +       };
> +
> +       /* sdhci0 */
> +       sdhci@12510000 {
> +               status = "disabled";
> +       };
> +
> +       /* sdhci1 */
> +       sdhci@12520000 {
> +               status = "disabled";
> +       };
> +
> +       /* sdhci2 */
> +       sdhci@12530000 {
> +               samsung,sdhci-bus-width = <4>;
> +               linux,mmc_cap_4_bit_data;
> +               samsung,sdhci-cd-internal;
> +               gpio-cd = <&gpk2 2 2 3 3>;
> +               gpios = <&gpk2 0 2 0 3>,
> +                       <&gpk2 1 2 0 3>,
> +                       <&gpk2 3 2 3 3>,
> +                       <&gpk2 4 2 3 3>,
> +                       <&gpk2 5 2 3 3>,
> +                       <&gpk2 6 2 3 3>;
> +       };
> +
> +       /* sdhci3 */
> +       sdhci@12540000 {
> +               samsung,sdhci-bus-width = <4>;
> +               linux,mmc_cap_4_bit_data;
> +               samsung,sdhci-cd-internal;
> +               gpio-cd = <&gpk3 2 2 3 3>;
> +               gpios = <&gpk3 0 2 0 3>,
> +                       <&gpk3 1 2 0 3>,
> +                       <&gpk3 3 2 3 3>,
> +                       <&gpk3 4 2 3 3>,
> +                       <&gpk3 5 2 3 3>,
> +                       <&gpk3 6 2 3 3>;
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led1 {
> +                       label   = "led1";
> +                       gpios   = <&gpc1 0 1 0x10000 0>;
> +                       linux,default-trigger   = "oneshot";
> +                       default-state   = "off";
> +               };
> +
> +               led2 {
> +                       label   = "led2";
> +                       gpios   = <&gpc1 2 1 0x10000 0>;
> +                       linux,default-trigger   = "heartbeat";
> +               };
> +       };
> +
> +       i2c@13860000 {  /* i2c0 */
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               gpios = <&gpd1 0 2 0 0>,
> +                       <&gpd1 1 2 0 0>;
> +               pmic@9 {
> +                       compatible = "maxim,max77686";
> +                       reg = <9>;
> +               };
> +       };
> +
> +       i2c@13870000 {  /* i2c1 */
> +               status = "disabled";
> +               gpios = <&gpd1 2 2 0 0>,
> +                       <&gpd1 3 2 0 0>;
> +       };
> +
> +       i2c@13880000 {  /* i2c2 */
> +               status = "disabled";
> +               gpios = <&gpa0 6 2 0 0>,
> +                       <&gpa0 7 2 0 0>;
> +       };
> +
> +       i2c@13890000 {  /* i2c3 */
> +               status = "disabled";
> +               gpios = <&gpa1 2 2 0 0>,
> +                       <&gpa1 3 2 0 0>;
> +       };
> +
> +       i2c@138A0000 {  /* i2c4 */
> +               status = "disabled";
> +       };
> +
> +       i2c@138B0000 {  /* i2c5 */
> +               status = "disabled";
> +       };
> +
> +       i2c@138C0000 {  /* i2c6 */
> +               status = "disabled";
> +       };
> +
> +       i2c@138D0000 {  /* i2c7 */
> +               status = "disabled";
> +       };
> +
> +       keypad@100A0000 {
> +               status = "disabled";
> +       };
> +
> +       spi_0: spi@13920000 {
> +               status = "disabled";
> +       };
> +
> +       spi_1: spi@13930000 {
> +               status = "disabled";
> +       };
> +
> +       spi_2: spi@13940000 {
> +               status = "disabled";
> +       };
> +};
> --
> 1.7.9.5
>
Sachin Kamat Aug. 8, 2012, 4:04 a.m. UTC | #2
On 8 August 2012 00:42, Dongjin Kim <tobetter@gmail.com> wrote:
> This patch create a DTS file for ODROID-X, it desribes PMIC max77686 and LED
> gpios base.
>
> Signed-off-by: Dongjin Kim <dongjin.kim@agreeyamobility.net>
> ---
>  arch/arm/boot/dts/exynos4412-odroidx.dts |  148 ++++++++++++++++++++++++++++++
>  1 file changed, 148 insertions(+)
>  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> new file mode 100644
> index 0000000..b0a892b
> --- /dev/null
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -0,0 +1,148 @@
> +/*
> + * Samsung's Exynos4210 based Origen board device tree source
> + *
> + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> + *             http://www.samsung.com
> + * Copyright (c) 2010-2011 Linaro Ltd.
> + *             www.linaro.org
> + *
> + * Device tree source file for Insignal's Origen board which is based on
> + * Samsung's Exynos4210 SoC.

Don't you think you need to update this header?


> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> +*/
> +
> +/dts-v1/;
> +/include/ "exynos4412.dtsi"
> +/include/ "max77686.dtsi"
> +
> +/ {
> +       model = "Hardkernel ODROID-X evaluation board based on Exynos4412";
> +       compatible = "hardkernel,odroidx", "samsung,exynos4412";
> +
> +       memory {
> +               reg = <0x40000000 0x40000000>;
> +       };
> +
> +       chosen {
> +               bootargs = "root=/dev/mmcblk0p1 init=/sbin/init console=ttySAC1,115200 console=tty1 rootdalay=2";
> +       };
> +
> +       /* sdhci0 */
> +       sdhci@12510000 {
> +               status = "disabled";
> +       };
> +
> +       /* sdhci1 */
> +       sdhci@12520000 {
> +               status = "disabled";
> +       };
> +
> +       /* sdhci2 */
> +       sdhci@12530000 {
> +               samsung,sdhci-bus-width = <4>;
> +               linux,mmc_cap_4_bit_data;
> +               samsung,sdhci-cd-internal;
> +               gpio-cd = <&gpk2 2 2 3 3>;
> +               gpios = <&gpk2 0 2 0 3>,
> +                       <&gpk2 1 2 0 3>,
> +                       <&gpk2 3 2 3 3>,
> +                       <&gpk2 4 2 3 3>,
> +                       <&gpk2 5 2 3 3>,
> +                       <&gpk2 6 2 3 3>;
> +       };
> +
> +       /* sdhci3 */
> +       sdhci@12540000 {
> +               samsung,sdhci-bus-width = <4>;
> +               linux,mmc_cap_4_bit_data;
> +               samsung,sdhci-cd-internal;
> +               gpio-cd = <&gpk3 2 2 3 3>;
> +               gpios = <&gpk3 0 2 0 3>,
> +                       <&gpk3 1 2 0 3>,
> +                       <&gpk3 3 2 3 3>,
> +                       <&gpk3 4 2 3 3>,
> +                       <&gpk3 5 2 3 3>,
> +                       <&gpk3 6 2 3 3>;
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               led1 {
> +                       label   = "led1";
> +                       gpios   = <&gpc1 0 1 0x10000 0>;
> +                       linux,default-trigger   = "oneshot";
> +                       default-state   = "off";
> +               };
> +
> +               led2 {
> +                       label   = "led2";
> +                       gpios   = <&gpc1 2 1 0x10000 0>;
> +                       linux,default-trigger   = "heartbeat";
> +               };
> +       };
> +
> +       i2c@13860000 {  /* i2c0 */
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               gpios = <&gpd1 0 2 0 0>,
> +                       <&gpd1 1 2 0 0>;
> +               pmic@9 {
> +                       compatible = "maxim,max77686";
> +                       reg = <9>;
> +               };
> +       };
> +
> +       i2c@13870000 {  /* i2c1 */
> +               status = "disabled";
> +               gpios = <&gpd1 2 2 0 0>,
> +                       <&gpd1 3 2 0 0>;
> +       };
> +
> +       i2c@13880000 {  /* i2c2 */
> +               status = "disabled";
> +               gpios = <&gpa0 6 2 0 0>,
> +                       <&gpa0 7 2 0 0>;
> +       };
> +
> +       i2c@13890000 {  /* i2c3 */
> +               status = "disabled";
> +               gpios = <&gpa1 2 2 0 0>,
> +                       <&gpa1 3 2 0 0>;
> +       };
> +
> +       i2c@138A0000 {  /* i2c4 */
> +               status = "disabled";
> +       };
> +
> +       i2c@138B0000 {  /* i2c5 */
> +               status = "disabled";
> +       };
> +
> +       i2c@138C0000 {  /* i2c6 */
> +               status = "disabled";
> +       };
> +
> +       i2c@138D0000 {  /* i2c7 */
> +               status = "disabled";
> +       };
> +
> +       keypad@100A0000 {
> +               status = "disabled";
> +       };
> +
> +       spi_0: spi@13920000 {
> +               status = "disabled";
> +       };
> +
> +       spi_1: spi@13930000 {
> +               status = "disabled";
> +       };
> +
> +       spi_2: spi@13940000 {
> +               status = "disabled";
> +       };
> +};
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
kgene@kernel.org Sept. 19, 2012, 11:26 p.m. UTC | #3
Thomas Abraham wrote:
> 
> On 8 August 2012 00:42, Dongjin Kim <tobetter@gmail.com> wrote:
> > This patch create a DTS file for ODROID-X, it desribes PMIC max77686 and
> LED
> > gpios base.
> >
> > Signed-off-by: Dongjin Kim <dongjin.kim@agreeyamobility.net>
> > ---
> >  arch/arm/boot/dts/exynos4412-odroidx.dts |  148
> ++++++++++++++++++++++++++++++
> >  1 file changed, 148 insertions(+)
> >  create mode 100644 arch/arm/boot/dts/exynos4412-odroidx.dts
> >
> > diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts
> b/arch/arm/boot/dts/exynos4412-odroidx.dts
> > new file mode 100644
> > index 0000000..b0a892b
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> > @@ -0,0 +1,148 @@
> > +/*
> > + * Samsung's Exynos4210 based Origen board device tree source
> > + *
> > + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
> > + *             http://www.samsung.com
> > + * Copyright (c) 2010-2011 Linaro Ltd.
> > + *             www.linaro.org
> > + *
> > + * Device tree source file for Insignal's Origen board which is based
> on
> > + * Samsung's Exynos4210 SoC.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > +*/
> > +
> > +/dts-v1/;
> > +/include/ "exynos4412.dtsi"
> > +/include/ "max77686.dtsi"
> > +
> > +/ {
> > +       model = "Hardkernel ODROID-X evaluation board based on
> Exynos4412";
> > +       compatible = "hardkernel,odroidx", "samsung,exynos4412";
> 
> The compatible value "samsung,exynos4412" can be added to the
> compatible list in mach-exynos4-dt.c file. Otherwise, this looks fine.
> 
Dongjin, any updates on this?

K-Gene <kgene@kernel.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
new file mode 100644
index 0000000..b0a892b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -0,0 +1,148 @@ 
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ *		www.linaro.org
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+/include/ "max77686.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X evaluation board based on Exynos4412";
+	compatible = "hardkernel,odroidx", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p1 init=/sbin/init console=ttySAC1,115200 console=tty1 rootdalay=2";
+	};
+
+	/* sdhci0 */
+	sdhci@12510000 {
+		status = "disabled";
+	};
+
+	/* sdhci1 */
+	sdhci@12520000 {
+		status = "disabled";
+	};
+
+	/* sdhci2 */
+	sdhci@12530000 {
+		samsung,sdhci-bus-width = <4>;
+		linux,mmc_cap_4_bit_data;
+		samsung,sdhci-cd-internal;
+		gpio-cd = <&gpk2 2 2 3 3>;
+		gpios = <&gpk2 0 2 0 3>,
+			<&gpk2 1 2 0 3>,
+			<&gpk2 3 2 3 3>,
+			<&gpk2 4 2 3 3>,
+			<&gpk2 5 2 3 3>,
+			<&gpk2 6 2 3 3>;
+	};
+
+	/* sdhci3 */
+	sdhci@12540000 {
+		samsung,sdhci-bus-width = <4>;
+		linux,mmc_cap_4_bit_data;
+		samsung,sdhci-cd-internal;
+		gpio-cd	= <&gpk3 2 2 3 3>;
+		gpios = <&gpk3 0 2 0 3>,
+			<&gpk3 1 2 0 3>,
+			<&gpk3 3 2 3 3>,
+			<&gpk3 4 2 3 3>,
+			<&gpk3 5 2 3 3>,
+			<&gpk3 6 2 3 3>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label	= "led1";
+			gpios	= <&gpc1 0 1 0x10000 0>;
+			linux,default-trigger	= "oneshot";
+			default-state	= "off";
+		};
+
+		led2 {
+			label	= "led2";
+			gpios	= <&gpc1 2 1 0x10000 0>;
+			linux,default-trigger	= "heartbeat";
+		};
+	};
+
+	i2c@13860000 {	/* i2c0 */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpd1 0 2 0 0>,
+			<&gpd1 1 2 0 0>;
+		pmic@9 {
+			compatible = "maxim,max77686";
+			reg = <9>;
+		};
+	};
+
+	i2c@13870000 {	/* i2c1 */
+		status = "disabled";
+		gpios = <&gpd1 2 2 0 0>,
+			<&gpd1 3 2 0 0>;
+	};
+
+	i2c@13880000 {	/* i2c2 */
+		status = "disabled";
+		gpios = <&gpa0 6 2 0 0>,
+			<&gpa0 7 2 0 0>;
+	};
+
+	i2c@13890000 {	/* i2c3 */
+		status = "disabled";
+		gpios = <&gpa1 2 2 0 0>,
+			<&gpa1 3 2 0 0>;
+	};
+
+	i2c@138A0000 {	/* i2c4 */
+		status = "disabled";
+	};
+
+	i2c@138B0000 {	/* i2c5 */
+		status = "disabled";
+	};
+
+	i2c@138C0000 {	/* i2c6 */
+		status = "disabled";
+	};
+
+	i2c@138D0000 {	/* i2c7 */
+		status = "disabled";
+	};
+
+	keypad@100A0000 {
+		status = "disabled";
+	};
+
+	spi_0: spi@13920000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@13930000 {
+		status = "disabled";
+	};
+
+	spi_2: spi@13940000 {
+		status = "disabled";
+	};
+};