deleted file mode 100644
@@ -1,633 +0,0 @@
-/*
- * Copyright 2012 Linaro Ltd
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/include/ "skeleton.dtsi"
-
-/ {
- soc-u9500 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "stericsson,db8500";
- interrupt-parent = <&intc>;
- ranges;
-
- intc: interrupt-controller@a0411000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <1>;
- interrupt-controller;
- reg = <0xa0411000 0x1000>,
- <0xa0410100 0x100>;
- };
-
- L2: l2-cache {
- compatible = "arm,pl310-cache";
- reg = <0xa0412000 0x1000>;
- interrupts = <0 13 4>;
- cache-unified;
- cache-level = <2>;
- };
-
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 7 0x4>;
- };
-
- timer@a0410600 {
- compatible = "arm,cortex-a9-twd-timer";
- reg = <0xa0410600 0x20>;
- interrupts = <1 13 0x304>;
- };
-
- rtc@80154000 {
- compatible = "arm,rtc-pl031", "arm,primecell";
- reg = <0x80154000 0x1000>;
- interrupts = <0 18 0x4>;
- };
-
- gpio0: gpio@8012e000 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8012e000 0x80>;
- interrupts = <0 119 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <0>;
- };
-
- gpio1: gpio@8012e080 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8012e080 0x80>;
- interrupts = <0 120 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <1>;
- };
-
- gpio2: gpio@8000e000 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8000e000 0x80>;
- interrupts = <0 121 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <2>;
- };
-
- gpio3: gpio@8000e080 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8000e080 0x80>;
- interrupts = <0 122 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <3>;
- };
-
- gpio4: gpio@8000e100 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8000e100 0x80>;
- interrupts = <0 123 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <4>;
- };
-
- gpio5: gpio@8000e180 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8000e180 0x80>;
- interrupts = <0 124 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <5>;
- };
-
- gpio6: gpio@8011e000 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8011e000 0x80>;
- interrupts = <0 125 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <6>;
- };
-
- gpio7: gpio@8011e080 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0x8011e080 0x80>;
- interrupts = <0 126 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <7>;
- };
-
- gpio8: gpio@a03fe000 {
- compatible = "stericsson,db8500-gpio",
- "st,nomadik-gpio";
- reg = <0xa03fe000 0x80>;
- interrupts = <0 127 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- st,supports-sleepmode;
- gpio-controller;
- #gpio-cells = <2>;
- gpio-bank = <8>;
- };
-
- pinctrl {
- compatible = "stericsson,nmk_pinctrl";
- };
-
- usb@a03e0000 {
- compatible = "stericsson,db8500-musb",
- "mentor,musb";
- reg = <0xa03e0000 0x10000>;
- interrupts = <0 23 0x4>;
- };
-
- dma-controller@801C0000 {
- compatible = "stericsson,db8500-dma40",
- "stericsson,dma40";
- reg = <0x801C0000 0x1000 0x40010000 0x800>;
- interrupts = <0 25 0x4>;
- };
-
- prcmu@80157000 {
- compatible = "stericsson,db8500-prcmu";
- reg = <0x80157000 0x1000>;
- interrupts = <0 47 0x4>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- prcmu-timer-4@80157450 {
- compatible = "stericsson,db8500-prcmu-timer-4";
- reg = <0x80157450 0xC>;
- };
-
- db8500-prcmu-regulators {
- compatible = "stericsson,db8500-prcmu-regulator";
-
- // DB8500_REGULATOR_VAPE
- db8500_vape_reg: db8500_vape {
- regulator-compatible = "db8500_vape";
- regulator-name = "db8500-vape";
- regulator-always-on;
- };
-
- // DB8500_REGULATOR_VARM
- db8500_varm_reg: db8500_varm {
- regulator-compatible = "db8500_varm";
- regulator-name = "db8500-varm";
- };
-
- // DB8500_REGULATOR_VMODEM
- db8500_vmodem_reg: db8500_vmodem {
- regulator-compatible = "db8500_vmodem";
- regulator-name = "db8500-vmodem";
- };
-
- // DB8500_REGULATOR_VPLL
- db8500_vpll_reg: db8500_vpll {
- regulator-compatible = "db8500_vpll";
- regulator-name = "db8500-vpll";
- };
-
- // DB8500_REGULATOR_VSMPS1
- db8500_vsmps1_reg: db8500_vsmps1 {
- regulator-compatible = "db8500_vsmps1";
- regulator-name = "db8500-vsmps1";
- };
-
- // DB8500_REGULATOR_VSMPS2
- db8500_vsmps2_reg: db8500_vsmps2 {
- regulator-compatible = "db8500_vsmps2";
- regulator-name = "db8500-vsmps2";
- };
-
- // DB8500_REGULATOR_VSMPS3
- db8500_vsmps3_reg: db8500_vsmps3 {
- regulator-compatible = "db8500_vsmps3";
- regulator-name = "db8500-vsmps3";
- };
-
- // DB8500_REGULATOR_VRF1
- db8500_vrf1_reg: db8500_vrf1 {
- regulator-compatible = "db8500_vrf1";
- regulator-name = "db8500-vrf1";
- };
-
- // DB8500_REGULATOR_SWITCH_SVAMMDSP
- db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
- regulator-compatible = "db8500_sva_mmdsp";
- regulator-name = "db8500-sva-mmdsp";
- };
-
- // DB8500_REGULATOR_SWITCH_SVAMMDSPRET
- db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
- regulator-compatible = "db8500_sva_mmdsp_ret";
- regulator-name = "db8500-sva-mmdsp-ret";
- };
-
- // DB8500_REGULATOR_SWITCH_SVAPIPE
- db8500_sva_pipe_reg: db8500_sva_pipe {
- regulator-compatible = "db8500_sva_pipe";
- regulator-name = "db8500_sva_pipe";
- };
-
- // DB8500_REGULATOR_SWITCH_SIAMMDSP
- db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
- regulator-compatible = "db8500_sia_mmdsp";
- regulator-name = "db8500_sia_mmdsp";
- };
-
- // DB8500_REGULATOR_SWITCH_SIAMMDSPRET
- db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
- regulator-name = "db8500-sia-mmdsp-ret";
- };
-
- // DB8500_REGULATOR_SWITCH_SIAPIPE
- db8500_sia_pipe_reg: db8500_sia_pipe {
- regulator-compatible = "db8500_sia_pipe";
- regulator-name = "db8500-sia-pipe";
- };
-
- // DB8500_REGULATOR_SWITCH_SGA
- db8500_sga_reg: db8500_sga {
- regulator-compatible = "db8500_sga";
- regulator-name = "db8500-sga";
- vin-supply = <&db8500_vape_reg>;
- };
-
- // DB8500_REGULATOR_SWITCH_B2R2_MCDE
- db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
- regulator-compatible = "db8500_b2r2_mcde";
- regulator-name = "db8500-b2r2-mcde";
- vin-supply = <&db8500_vape_reg>;
- };
-
- // DB8500_REGULATOR_SWITCH_ESRAM12
- db8500_esram12_reg: db8500_esram12 {
- regulator-compatible = "db8500_esram12";
- regulator-name = "db8500-esram12";
- };
-
- // DB8500_REGULATOR_SWITCH_ESRAM12RET
- db8500_esram12_ret_reg: db8500_esram12_ret {
- regulator-compatible = "db8500_esram12_ret";
- regulator-name = "db8500-esram12-ret";
- };
-
- // DB8500_REGULATOR_SWITCH_ESRAM34
- db8500_esram34_reg: db8500_esram34 {
- regulator-compatible = "db8500_esram34";
- regulator-name = "db8500-esram34";
- };
-
- // DB8500_REGULATOR_SWITCH_ESRAM34RET
- db8500_esram34_ret_reg: db8500_esram34_ret {
- regulator-compatible = "db8500_esram34_ret";
- regulator-name = "db8500-esram34-ret";
- };
- };
-
- ab8500@5 {
- compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
- interrupts = <0 40 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- ab8500-rtc {
- compatible = "stericsson,ab8500-rtc";
- interrupts = <17 0x4
- 18 0x4>;
- interrupt-names = "60S", "ALARM";
- };
-
- ab8500-gpadc {
- compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 0x4
- 39 0x4>;
- interrupt-names = "HW_CONV_END", "SW_CONV_END";
- vddadc-supply = <&ab8500_ldo_tvout_reg>;
- };
-
- ab8500-usb {
- compatible = "stericsson,ab8500-usb";
- interrupts = < 90 0x4
- 96 0x4
- 14 0x4
- 15 0x4
- 79 0x4
- 74 0x4
- 75 0x4>;
- interrupt-names = "ID_WAKEUP_R",
- "ID_WAKEUP_F",
- "VBUS_DET_F",
- "VBUS_DET_R",
- "USB_LINK_STATUS",
- "USB_ADP_PROBE_PLUG",
- "USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
- v-ape-supply = <&db8500_vape_reg>;
- musb_1v8-supply = <&db8500_vsmps2_reg>;
- };
-
- ab8500-ponkey {
- compatible = "stericsson,ab8500-ponkey";
- interrupts = <6 0x4
- 7 0x4>;
- interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
- };
-
- ab8500-sysctrl {
- compatible = "stericsson,ab8500-sysctrl";
- };
-
- ab8500-pwm {
- compatible = "stericsson,ab8500-pwm";
- };
-
- ab8500-debugfs {
- compatible = "stericsson,ab8500-debug";
- };
-
- codec: ab8500-codec {
- compatible = "stericsson,ab8500-codec";
-
- stericsson,earpeice-cmv = <950>; /* Units in mV. */
- };
-
- ab8500-regulators {
- compatible = "stericsson,ab8500-regulator";
-
- // supplies to the display/camera
- ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- regulator-compatible = "ab8500_ldo_aux1";
- regulator-name = "V-DISPLAY";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2900000>;
- regulator-boot-on;
- /* BUG: If turned off MMC will be affected. */
- regulator-always-on;
- };
-
- // supplies to the on-board eMMC
- ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
- regulator-compatible = "ab8500_ldo_aux2";
- regulator-name = "V-eMMC1";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <3300000>;
- };
-
- // supply for VAUX3; SDcard slots
- ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
- regulator-compatible = "ab8500_ldo_aux3";
- regulator-name = "V-MMC-SD";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <3300000>;
- };
-
- // supply for v-intcore12; VINTCORE12 LDO
- ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
- regulator-compatible = "ab8500_ldo_initcore";
- regulator-name = "V-INTCORE";
- };
-
- // supply for tvout; gpadc; TVOUT LDO
- ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
- regulator-compatible = "ab8500_ldo_tvout";
- regulator-name = "V-TVOUT";
- };
-
- // supply for ab8500-usb; USB LDO
- ab8500_ldo_usb_reg: ab8500_ldo_usb {
- regulator-compatible = "ab8500_ldo_usb";
- regulator-name = "dummy";
- };
-
- // supply for ab8500-vaudio; VAUDIO LDO
- ab8500_ldo_audio_reg: ab8500_ldo_audio {
- regulator-compatible = "ab8500_ldo_audio";
- regulator-name = "V-AUD";
- };
-
- // supply for v-anamic1 VAMic1-LDO
- ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
- regulator-compatible = "ab8500_ldo_anamic1";
- regulator-name = "V-AMIC1";
- };
-
- // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
- ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
- regulator-compatible = "ab8500_ldo_amamic2";
- regulator-name = "V-AMIC2";
- };
-
- // supply for v-dmic; VDMIC LDO
- ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
- regulator-compatible = "ab8500_ldo_dmic";
- regulator-name = "V-DMIC";
- };
-
- // supply for U8500 CSI/DSI; VANA LDO
- ab8500_ldo_ana_reg: ab8500_ldo_ana {
- regulator-compatible = "ab8500_ldo_ana";
- regulator-name = "V-CSI/DSI";
- };
- };
- };
- };
-
- i2c@80004000 {
- compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
- reg = <0x80004000 0x1000>;
- interrupts = <0 21 0x4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clock-frequency = <400000>;
- stericsson,slsu = <0xe>;
- stericsson,tft = <1>;
- stericsson,rft = <8>;
- stericsson,timeout = <200>;
- stericsson,i2c_freq_mode_fast;
- };
-
- i2c@80122000 {
- compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
- reg = <0x80122000 0x1000>;
- interrupts = <0 22 0x4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clock-frequency = <400000>;
- stericsson,slsu = <0xe>;
- stericsson,tft = <1>;
- stericsson,rft = <8>;
- stericsson,timeout = <200>;
- stericsson,i2c_freq_mode_fast;
- };
-
- i2c@80128000 {
- compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
- reg = <0x80128000 0x1000>;
- interrupts = <0 55 0x4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clock-frequency = <400000>;
- stericsson,slsu = <0xe>;
- stericsson,tft = <1>;
- stericsson,rft = <8>;
- stericsson,timeout = <200>;
- stericsson,i2c_freq_mode_fast;
- };
-
- i2c@80110000 {
- compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
- reg = <0x80110000 0x1000>;
- interrupts = <0 12 0x4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clock-frequency = <400000>;
- stericsson,slsu = <0xe>;
- stericsson,tft = <1>;
- stericsson,rft = <8>;
- stericsson,timeout = <200>;
- stericsson,i2c_freq_mode_fast;
- };
-
- i2c@8012a000 {
- compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
- reg = <0x8012a000 0x1000>;
- interrupts = <0 51 0x4>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- clock-frequency = <400000>;
- stericsson,slsu = <0xe>;
- stericsson,tft = <1>;
- stericsson,rft = <8>;
- stericsson,timeout = <200>;
- stericsson,i2c_freq_mode_fast;
- };
-
- ssp@80002000 {
- compatible = "arm,pl022", "arm,primecell";
- reg = <80002000 0x1000>;
- interrupts = <0 14 0x4>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- // Add one of these for each child device
- cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
- &gpio6 22 0x4 &gpio7 0 0x4>;
-
- };
-
- uart@80120000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x80120000 0x1000>;
- interrupts = <0 11 0x4>;
- status = "disabled";
- };
- uart@80121000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x80121000 0x1000>;
- interrupts = <0 19 0x4>;
- status = "disabled";
- };
- uart@80007000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x80007000 0x1000>;
- interrupts = <0 26 0x4>;
- status = "disabled";
- };
-
- sdi@80126000 {
- compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80126000 0x1000>;
- interrupts = <0 60 0x4>;
- status = "disabled";
- };
- sdi@80118000 {
- compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80118000 0x1000>;
- interrupts = <0 50 0x4>;
- status = "disabled";
- };
- sdi@80005000 {
- compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80005000 0x1000>;
- interrupts = <0 41 0x4>;
- status = "disabled";
- };
- sdi@80119000 {
- compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80119000 0x1000>;
- interrupts = <0 59 0x4>;
- status = "disabled";
- };
- sdi@80114000 {
- compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80114000 0x1000>;
- interrupts = <0 99 0x4>;
- status = "disabled";
- };
- sdi@80008000 {
- compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80114000 0x1000>;
- interrupts = <0 100 0x4>;
- status = "disabled";
- };
-
- external-bus@50000000 {
- compatible = "simple-bus";
- reg = <0x50000000 0x4000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x50000000 0x4000000>;
- status = "disabled";
- };
- };
-};
new file mode 100644
@@ -0,0 +1,633 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ soc-u9500 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "stericsson,db8500";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ intc: interrupt-controller@a0411000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xa0411000 0x1000>,
+ <0xa0410100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xa0412000 0x1000>;
+ interrupts = <0 13 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 7 0x4>;
+ };
+
+ timer@a0410600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xa0410600 0x20>;
+ interrupts = <1 13 0x304>;
+ };
+
+ rtc@80154000 {
+ compatible = "arm,rtc-pl031", "arm,primecell";
+ reg = <0x80154000 0x1000>;
+ interrupts = <0 18 0x4>;
+ };
+
+ gpio0: gpio@8012e000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8012e000 0x80>;
+ interrupts = <0 119 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <0>;
+ };
+
+ gpio1: gpio@8012e080 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8012e080 0x80>;
+ interrupts = <0 120 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <1>;
+ };
+
+ gpio2: gpio@8000e000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e000 0x80>;
+ interrupts = <0 121 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <2>;
+ };
+
+ gpio3: gpio@8000e080 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e080 0x80>;
+ interrupts = <0 122 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <3>;
+ };
+
+ gpio4: gpio@8000e100 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e100 0x80>;
+ interrupts = <0 123 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <4>;
+ };
+
+ gpio5: gpio@8000e180 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8000e180 0x80>;
+ interrupts = <0 124 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <5>;
+ };
+
+ gpio6: gpio@8011e000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8011e000 0x80>;
+ interrupts = <0 125 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <6>;
+ };
+
+ gpio7: gpio@8011e080 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0x8011e080 0x80>;
+ interrupts = <0 126 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <7>;
+ };
+
+ gpio8: gpio@a03fe000 {
+ compatible = "stericsson,db8500-gpio",
+ "st,nomadik-gpio";
+ reg = <0xa03fe000 0x80>;
+ interrupts = <0 127 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ st,supports-sleepmode;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-bank = <8>;
+ };
+
+ pinctrl {
+ compatible = "stericsson,nmk_pinctrl";
+ };
+
+ usb@a03e0000 {
+ compatible = "stericsson,db8500-musb",
+ "mentor,musb";
+ reg = <0xa03e0000 0x10000>;
+ interrupts = <0 23 0x4>;
+ };
+
+ dma-controller@801C0000 {
+ compatible = "stericsson,db8500-dma40",
+ "stericsson,dma40";
+ reg = <0x801C0000 0x1000 0x40010000 0x800>;
+ interrupts = <0 25 0x4>;
+ };
+
+ prcmu@80157000 {
+ compatible = "stericsson,db8500-prcmu";
+ reg = <0x80157000 0x1000>;
+ interrupts = <0 47 0x4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ prcmu-timer-4@80157450 {
+ compatible = "stericsson,db8500-prcmu-timer-4";
+ reg = <0x80157450 0xC>;
+ };
+
+ db8500-prcmu-regulators {
+ compatible = "stericsson,db8500-prcmu-regulator";
+
+ // DB8500_REGULATOR_VAPE
+ db8500_vape_reg: db8500_vape {
+ regulator-compatible = "db8500_vape";
+ regulator-name = "db8500-vape";
+ regulator-always-on;
+ };
+
+ // DB8500_REGULATOR_VARM
+ db8500_varm_reg: db8500_varm {
+ regulator-compatible = "db8500_varm";
+ regulator-name = "db8500-varm";
+ };
+
+ // DB8500_REGULATOR_VMODEM
+ db8500_vmodem_reg: db8500_vmodem {
+ regulator-compatible = "db8500_vmodem";
+ regulator-name = "db8500-vmodem";
+ };
+
+ // DB8500_REGULATOR_VPLL
+ db8500_vpll_reg: db8500_vpll {
+ regulator-compatible = "db8500_vpll";
+ regulator-name = "db8500-vpll";
+ };
+
+ // DB8500_REGULATOR_VSMPS1
+ db8500_vsmps1_reg: db8500_vsmps1 {
+ regulator-compatible = "db8500_vsmps1";
+ regulator-name = "db8500-vsmps1";
+ };
+
+ // DB8500_REGULATOR_VSMPS2
+ db8500_vsmps2_reg: db8500_vsmps2 {
+ regulator-compatible = "db8500_vsmps2";
+ regulator-name = "db8500-vsmps2";
+ };
+
+ // DB8500_REGULATOR_VSMPS3
+ db8500_vsmps3_reg: db8500_vsmps3 {
+ regulator-compatible = "db8500_vsmps3";
+ regulator-name = "db8500-vsmps3";
+ };
+
+ // DB8500_REGULATOR_VRF1
+ db8500_vrf1_reg: db8500_vrf1 {
+ regulator-compatible = "db8500_vrf1";
+ regulator-name = "db8500-vrf1";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SVAMMDSP
+ db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+ regulator-compatible = "db8500_sva_mmdsp";
+ regulator-name = "db8500-sva-mmdsp";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SVAMMDSPRET
+ db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+ regulator-compatible = "db8500_sva_mmdsp_ret";
+ regulator-name = "db8500-sva-mmdsp-ret";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SVAPIPE
+ db8500_sva_pipe_reg: db8500_sva_pipe {
+ regulator-compatible = "db8500_sva_pipe";
+ regulator-name = "db8500_sva_pipe";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SIAMMDSP
+ db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+ regulator-compatible = "db8500_sia_mmdsp";
+ regulator-name = "db8500_sia_mmdsp";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SIAMMDSPRET
+ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+ regulator-name = "db8500-sia-mmdsp-ret";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SIAPIPE
+ db8500_sia_pipe_reg: db8500_sia_pipe {
+ regulator-compatible = "db8500_sia_pipe";
+ regulator-name = "db8500-sia-pipe";
+ };
+
+ // DB8500_REGULATOR_SWITCH_SGA
+ db8500_sga_reg: db8500_sga {
+ regulator-compatible = "db8500_sga";
+ regulator-name = "db8500-sga";
+ vin-supply = <&db8500_vape_reg>;
+ };
+
+ // DB8500_REGULATOR_SWITCH_B2R2_MCDE
+ db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+ regulator-compatible = "db8500_b2r2_mcde";
+ regulator-name = "db8500-b2r2-mcde";
+ vin-supply = <&db8500_vape_reg>;
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM12
+ db8500_esram12_reg: db8500_esram12 {
+ regulator-compatible = "db8500_esram12";
+ regulator-name = "db8500-esram12";
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM12RET
+ db8500_esram12_ret_reg: db8500_esram12_ret {
+ regulator-compatible = "db8500_esram12_ret";
+ regulator-name = "db8500-esram12-ret";
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM34
+ db8500_esram34_reg: db8500_esram34 {
+ regulator-compatible = "db8500_esram34";
+ regulator-name = "db8500-esram34";
+ };
+
+ // DB8500_REGULATOR_SWITCH_ESRAM34RET
+ db8500_esram34_ret_reg: db8500_esram34_ret {
+ regulator-compatible = "db8500_esram34_ret";
+ regulator-name = "db8500-esram34-ret";
+ };
+ };
+
+ ab8500@5 {
+ compatible = "stericsson,ab8500";
+ reg = <5>; /* mailbox 5 is i2c */
+ interrupts = <0 40 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 0x4
+ 18 0x4>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 0x4
+ 39 0x4>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
+ ab8500-usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = < 90 0x4
+ 96 0x4
+ 14 0x4
+ 15 0x4
+ 79 0x4
+ 74 0x4
+ 75 0x4>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_initcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-ponkey";
+ interrupts = <6 0x4
+ 7 0x4>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm {
+ compatible = "stericsson,ab8500-pwm";
+ };
+
+ ab8500-debugfs {
+ compatible = "stericsson,ab8500-debug";
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
+
+ ab8500-regulators {
+ compatible = "stericsson,ab8500-regulator";
+
+ // supplies to the display/camera
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-compatible = "ab8500_ldo_aux1";
+ regulator-name = "V-DISPLAY";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ /* BUG: If turned off MMC will be affected. */
+ regulator-always-on;
+ };
+
+ // supplies to the on-board eMMC
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-compatible = "ab8500_ldo_aux2";
+ regulator-name = "V-eMMC1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for VAUX3; SDcard slots
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-compatible = "ab8500_ldo_aux3";
+ regulator-name = "V-MMC-SD";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for v-intcore12; VINTCORE12 LDO
+ ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+ regulator-compatible = "ab8500_ldo_initcore";
+ regulator-name = "V-INTCORE";
+ };
+
+ // supply for tvout; gpadc; TVOUT LDO
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ regulator-compatible = "ab8500_ldo_tvout";
+ regulator-name = "V-TVOUT";
+ };
+
+ // supply for ab8500-usb; USB LDO
+ ab8500_ldo_usb_reg: ab8500_ldo_usb {
+ regulator-compatible = "ab8500_ldo_usb";
+ regulator-name = "dummy";
+ };
+
+ // supply for ab8500-vaudio; VAUDIO LDO
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ regulator-compatible = "ab8500_ldo_audio";
+ regulator-name = "V-AUD";
+ };
+
+ // supply for v-anamic1 VAMic1-LDO
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ regulator-compatible = "ab8500_ldo_anamic1";
+ regulator-name = "V-AMIC1";
+ };
+
+ // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+ ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+ regulator-compatible = "ab8500_ldo_amamic2";
+ regulator-name = "V-AMIC2";
+ };
+
+ // supply for v-dmic; VDMIC LDO
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ regulator-compatible = "ab8500_ldo_dmic";
+ regulator-name = "V-DMIC";
+ };
+
+ // supply for U8500 CSI/DSI; VANA LDO
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ regulator-compatible = "ab8500_ldo_ana";
+ regulator-name = "V-CSI/DSI";
+ };
+ };
+ };
+ };
+
+ i2c@80004000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x80004000 0x1000>;
+ interrupts = <0 21 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+ stericsson,slsu = <0xe>;
+ stericsson,tft = <1>;
+ stericsson,rft = <8>;
+ stericsson,timeout = <200>;
+ stericsson,i2c_freq_mode_fast;
+ };
+
+ i2c@80122000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x80122000 0x1000>;
+ interrupts = <0 22 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+ stericsson,slsu = <0xe>;
+ stericsson,tft = <1>;
+ stericsson,rft = <8>;
+ stericsson,timeout = <200>;
+ stericsson,i2c_freq_mode_fast;
+ };
+
+ i2c@80128000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x80128000 0x1000>;
+ interrupts = <0 55 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+ stericsson,slsu = <0xe>;
+ stericsson,tft = <1>;
+ stericsson,rft = <8>;
+ stericsson,timeout = <200>;
+ stericsson,i2c_freq_mode_fast;
+ };
+
+ i2c@80110000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x80110000 0x1000>;
+ interrupts = <0 12 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+ stericsson,slsu = <0xe>;
+ stericsson,tft = <1>;
+ stericsson,rft = <8>;
+ stericsson,timeout = <200>;
+ stericsson,i2c_freq_mode_fast;
+ };
+
+ i2c@8012a000 {
+ compatible = "stericsson,db8500-i2c", "st,nomadik-i2c";
+ reg = <0x8012a000 0x1000>;
+ interrupts = <0 51 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clock-frequency = <400000>;
+ stericsson,slsu = <0xe>;
+ stericsson,tft = <1>;
+ stericsson,rft = <8>;
+ stericsson,timeout = <200>;
+ stericsson,i2c_freq_mode_fast;
+ };
+
+ ssp@80002000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <80002000 0x1000>;
+ interrupts = <0 14 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ // Add one of these for each child device
+ cs-gpios = <&gpio0 31 0x4 &gpio4 14 0x4 &gpio4 16 0x4
+ &gpio6 22 0x4 &gpio7 0 0x4>;
+
+ };
+
+ uart@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 0x4>;
+ status = "disabled";
+ };
+ uart@80121000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80121000 0x1000>;
+ interrupts = <0 19 0x4>;
+ status = "disabled";
+ };
+ uart@80007000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80007000 0x1000>;
+ interrupts = <0 26 0x4>;
+ status = "disabled";
+ };
+
+ sdi@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80126000 0x1000>;
+ interrupts = <0 60 0x4>;
+ status = "disabled";
+ };
+ sdi@80118000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80118000 0x1000>;
+ interrupts = <0 50 0x4>;
+ status = "disabled";
+ };
+ sdi@80005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80005000 0x1000>;
+ interrupts = <0 41 0x4>;
+ status = "disabled";
+ };
+ sdi@80119000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80119000 0x1000>;
+ interrupts = <0 59 0x4>;
+ status = "disabled";
+ };
+ sdi@80114000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80114000 0x1000>;
+ interrupts = <0 99 0x4>;
+ status = "disabled";
+ };
+ sdi@80008000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x80114000 0x1000>;
+ interrupts = <0 100 0x4>;
+ status = "disabled";
+ };
+
+ external-bus@50000000 {
+ compatible = "simple-bus";
+ reg = <0x50000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50000000 0x4000000>;
+ status = "disabled";
+ };
+ };
+};
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-/include/ "db8500.dtsi"
+/include/ "dbx5x0.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/db8500.dtsi | 633 ---------------------------------------- arch/arm/boot/dts/dbx5x0.dtsi | 633 ++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/snowball.dts | 2 +- 3 files changed, 634 insertions(+), 634 deletions(-) delete mode 100644 arch/arm/boot/dts/db8500.dtsi create mode 100644 arch/arm/boot/dts/dbx5x0.dtsi