@@ -1133,3 +1133,41 @@ static int __init omap_device_init(void)
return 0;
}
core_initcall(omap_device_init);
+
+/**
+ * omap_device_late_idle - idle devices without drivers
+ * @dev: struct device * associated with omap_device
+ * @data: unused
+ *
+ * Check the driver bound status of this device, and idle it
+ * if there is no driver attached.
+ */
+static int __init omap_device_late_idle(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+
+ if (!od)
+ return 0;
+
+ /*
+ * If omap_device state is enabled, but has no driver bound,
+ * idle it.
+ */
+ if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
+ if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
+ dev_warn(dev, "%s: enabled but no driver. Idling\n",
+ __func__);
+ omap_device_idle(pdev);
+ }
+ }
+
+ return 0;
+}
+
+static int __init omap_device_late_init(void)
+{
+ bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+ return 0;
+}
+late_initcall(omap_device_late_init);
Under some circumstances, drivers may leave an omap_device enabled due to driver programming errors, or due to a failure in the drivers probe method. Using the recently added omap_device driver_status field, we can detect conditions where an omap_device is enabled but has no driver bound and then ensure that the device is properly idled until it can be probed again. The goal of this feature is not only to detect and warn on these error conditions, but also to ensure that devices are properly put in low-power states so they do not prevent SoC-wide low-power states. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com> --- arch/arm/plat-omap/omap_device.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)