@@ -25,23 +25,31 @@
aips@70000000 { /* aips-1 */
spba@70000000 {
esdhc@70004000 { /* ESDHC1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1_1>;
fsl,cd-internal;
fsl,wp-internal;
status = "okay";
};
esdhc@70008000 { /* ESDHC2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>;
cd-gpios = <&gpio1 6 0>;
wp-gpios = <&gpio1 5 0>;
status = "okay";
};
uart3: serial@7000c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_1>;
fsl,uart-has-rtscts;
status = "okay";
};
ecspi@70010000 { /* ECSPI1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>;
status = "okay";
@@ -170,22 +178,42 @@
};
iomuxc@73fa8000 {
- compatible = "fsl,imx51-iomuxc-babbage";
- reg = <0x73fa8000 0x4000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 694 0x85 /* MX51_PAD_GPIO1_0__SD1_CD */
+ 697 0x85 /* MX51_PAD_GPIO1_1__SD1_WP */
+ 737 0x85 /* MX51_PAD_GPIO1_5__GPIO1_5 */
+ 740 0x85 /* MX51_PAD_GPIO1_6__GPIO1_6 */
+ 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */
+ 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */
+ 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */
+ >;
+ };
+ };
};
uart1: serial@73fbc000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_1>;
fsl,uart-has-rtscts;
status = "okay";
};
uart2: serial@73fc0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
status = "okay";
};
};
aips@80000000 { /* aips-2 */
i2c@83fc4000 { /* I2C2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
status = "okay";
sgtl5000: codec@0a {
@@ -198,10 +226,14 @@
};
audmux@83fd0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
ethernet@83fec000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
phy-mode = "mii";
status = "okay";
};
@@ -179,6 +179,122 @@
status = "disabled";
};
+ iomuxc@73fa8000 {
+ compatible = "fsl,imx51-iomuxc";
+ reg = <0x73fa8000 0x4000>;
+
+ audmux {
+ pinctrl_audmux_1: audmuxgrp-1 {
+ fsl,pins = <
+ 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */
+ 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */
+ 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */
+ 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */
+ >;
+ };
+ };
+
+ fec {
+ pinctrl_fec_1: fecgrp-1 {
+ fsl,pins = <
+ 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */
+ 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */
+ 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */
+ 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */
+ 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */
+ 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */
+ 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */
+ 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */
+ 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */
+ 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */
+ 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */
+ 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */
+ 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */
+ 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */
+ 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */
+ 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */
+ 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */
+ >;
+ };
+ };
+
+ ecspi1 {
+ pinctrl_ecspi1_1: ecspi1grp-1 {
+ fsl,pins = <
+ 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */
+ 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */
+ 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */
+ >;
+ };
+ };
+
+ esdhc1 {
+ pinctrl_esdhc1_1: esdhc1grp-1 {
+ fsl,pins = <
+ 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */
+ 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */
+ 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */
+ 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */
+ 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */
+ 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */
+ >;
+ };
+ };
+
+ esdhc2 {
+ pinctrl_esdhc2_1: esdhc2grp-1 {
+ fsl,pins = <
+ 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */
+ 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */
+ 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */
+ 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */
+ 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */
+ 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */
+ >;
+ };
+ };
+
+ i2c2 {
+ pinctrl_i2c2_1: i2c2grp-1 {
+ fsl,pins = <
+ 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */
+ 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */
+ 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */
+ 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */
+ 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */
+ >;
+ };
+ };
+
+ uart2 {
+ pinctrl_uart2_1: uart2grp-1 {
+ fsl,pins = <
+ 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */
+ 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */
+ >;
+ };
+ };
+
+ uart3 {
+ pinctrl_uart3_1: uart3grp-1 {
+ fsl,pins = <
+ 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */
+ 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */
+ 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */
+ 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */
+ >;
+ };
+ };
+ };
+
uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
Add pinctrl settings for the exsiting devices in imx51-babbage.dts. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/boot/dts/imx51-babbage.dts | 36 ++++++++++- arch/arm/boot/dts/imx51.dtsi | 116 +++++++++++++++++++++++++++++++++++ 2 files changed, 150 insertions(+), 2 deletions(-)