diff mbox

pinctrl: imx51: fix .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI

Message ID 1344867532-27068-1-git-send-email-shawn.guo@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Shawn Guo Aug. 13, 2012, 2:18 p.m. UTC 
The .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI should be 0x7bc rather
than NO_PAD.  This error will cause SD2 probe failure.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
Hi Linus,

Please send this fix for -rc, so that my imx51 pinctrl series can get
a fixed base.

Regards,
Shawn

 drivers/pinctrl/pinctrl-imx51.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Comments

Linus Walleij Aug. 13, 2012, 2:20 p.m. UTC | #1 
On Mon, Aug 13, 2012 at 4:18 PM, Shawn Guo <shawn.guo@linaro.org> wrote:

> The .conf_reg of MX51_PAD_SD2_CMD__CSPI_MOSI should be 0x7bc rather
> than NO_PAD.  This error will cause SD2 probe failure.
>
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Applied to fixes.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/drivers/pinctrl/pinctrl-imx51.c b/drivers/pinctrl/pinctrl-imx51.c
index 689b3c8..9fd0216 100644
--- a/drivers/pinctrl/pinctrl-imx51.c
+++ b/drivers/pinctrl/pinctrl-imx51.c
@@ -974,7 +974,7 @@  static struct imx_pin_reg imx51_pin_regs[] = {
 	IMX_PIN_REG(MX51_PAD_EIM_DA13, NO_PAD, 0x050, 0, 0x000, 0), /* MX51_PAD_EIM_DA13__EIM_DA13 */
 	IMX_PIN_REG(MX51_PAD_EIM_DA14, NO_PAD, 0x054, 0, 0x000, 0), /* MX51_PAD_EIM_DA14__EIM_DA14 */
 	IMX_PIN_REG(MX51_PAD_EIM_DA15, NO_PAD, 0x058, 0, 0x000, 0), /* MX51_PAD_EIM_DA15__EIM_DA15 */
-	IMX_PIN_REG(MX51_PAD_SD2_CMD, NO_PAD, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */
+	IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 2, 0x91c, 3), /* MX51_PAD_SD2_CMD__CSPI_MOSI */
 	IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 1, 0x9b0, 2), /* MX51_PAD_SD2_CMD__I2C1_SCL */
 	IMX_PIN_REG(MX51_PAD_SD2_CMD, 0x7bc, 0x3b4, 0, 0x000, 0), /* MX51_PAD_SD2_CMD__SD2_CMD */
 	IMX_PIN_REG(MX51_PAD_SD2_CLK, 0x7c0, 0x3b8, 2, 0x914, 3), /* MX51_PAD_SD2_CLK__CSPI_SCLK */