| Message ID | 1345545940-2232-4-git-send-email-sourav.poddar@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Aug 21, 2012 at 04:15:39PM +0530, Sourav Poddar wrote: > Add keypad data node in omap5-evm. > > Based on I2C support patch for omap5, which has been > already posted as a different series. > > Cc: Benoit Cousson <b-cousson@ti.com> > Cc: Felipe Balbi <balbi@ti.com> > Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> > Tested on omap5430 sdp with 3.5 custom kernel. > > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> after fixing my only comment below, you can add my: Acked-by: Felipe Balbi <balbi@ti.com> > --- > arch/arm/boot/dts/omap5-evm.dts | 95 +++++++++++++++++++++++++++++++++++++++ > 1 files changed, 95 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts > index 200c39a..6473983 100644 > --- a/arch/arm/boot/dts/omap5-evm.dts > +++ b/arch/arm/boot/dts/omap5-evm.dts > @@ -18,3 +18,98 @@ > reg = <0x80000000 0x40000000>; /* 1 GB */ > }; > }; > + > +&i2c5 { > + clock-frequency = <400000>; > + > + smsc@38 { > + compatible = "smsc"; > + reg = <0x38>; > + clock = <0x13>; > + keypad { > + compatible = "smsc,keypad"; > + interrupt-parent = <&gpio5>; > + interrupts = <23>; /* gpio line 151 */ > + keypad,num-rows = <8>; > + keypad,num-columns = <16>; > + linux,keymap = < 0x20041 /*KEY_F7*/ please add spaces around /* and */ so it's easier to read. Ditto to all others.
Hi, On Tue, Aug 21, 2012 at 4:17 PM, Felipe Balbi <balbi@ti.com> wrote: > On Tue, Aug 21, 2012 at 04:15:39PM +0530, Sourav Poddar wrote: >> Add keypad data node in omap5-evm. >> >> Based on I2C support patch for omap5, which has been >> already posted as a different series. >> >> Cc: Benoit Cousson <b-cousson@ti.com> >> Cc: Felipe Balbi <balbi@ti.com> >> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> >> Tested on omap5430 sdp with 3.5 custom kernel. >> >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> > > after fixing my only comment below, you can add my: > > Acked-by: Felipe Balbi <balbi@ti.com> > >> --- >> arch/arm/boot/dts/omap5-evm.dts | 95 +++++++++++++++++++++++++++++++++++++++ >> 1 files changed, 95 insertions(+), 0 deletions(-) >> >> diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts >> index 200c39a..6473983 100644 >> --- a/arch/arm/boot/dts/omap5-evm.dts >> +++ b/arch/arm/boot/dts/omap5-evm.dts >> @@ -18,3 +18,98 @@ >> reg = <0x80000000 0x40000000>; /* 1 GB */ >> }; >> }; >> + >> +&i2c5 { >> + clock-frequency = <400000>; >> + >> + smsc@38 { >> + compatible = "smsc"; >> + reg = <0x38>; >> + clock = <0x13>; >> + keypad { >> + compatible = "smsc,keypad"; >> + interrupt-parent = <&gpio5>; >> + interrupts = <23>; /* gpio line 151 */ >> + keypad,num-rows = <8>; >> + keypad,num-columns = <16>; >> + linux,keymap = < 0x20041 /*KEY_F7*/ > > please add spaces around /* and */ so it's easier to read. Ditto to all > others. > Yes, will add spaces in the new version. > -- > balbi
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 200c39a..6473983 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -18,3 +18,98 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; }; + +&i2c5 { + clock-frequency = <400000>; + + smsc@38 { + compatible = "smsc"; + reg = <0x38>; + clock = <0x13>; + keypad { + compatible = "smsc,keypad"; + interrupt-parent = <&gpio5>; + interrupts = <23>; /* gpio line 151 */ + keypad,num-rows = <8>; + keypad,num-columns = <16>; + linux,keymap = < 0x20041 /*KEY_F7*/ + 0x30001 /*KEY_ESC*/ + 0x4003e /*KEY_F4*/ + 0x50022 /*KEY_G*/ + 0x70023 /*KEY_H*/ + 0x9009a /*KEY_CYCLEWINDOWS*/ + 0xc000e /*KEY_BACKSPACE*/ + 0xd0057 /*KEY_F11*/ + 0xe009f /*KEY_FORWARD*/ + 0xf006e /*KEY_INSERT*/ + 0x1020036 /*KEY_RIGHTSHIFT*/ + 0x1030011 /*KEY_W*/ + 0x1040010 /*KEY_Q*/ + 0x1050012 /*KEY_E*/ + 0x1070013 /*KEY_R*/ + 0x1080016 /*KEY_U*/ + 0x10c0017 /*KEY_I*/ + 0x10d0067 /*KEY_UP*/ + 0x10e0018 /*KEY_O*/ + 0x10f0019 /*KEY_LEFT*/ + 0x2020003 /*KEY_2*/ + 0x2040004 /*KEY_1*/ + 0x2050005 /*KEY_3*/ + 0x2070008 /*KEY_4*/ + 0x2080009 /*KEY_7*/ + 0x20b0064 /*KEY_8*/ + 0x20c006c /*KEY_RIGHTALT*/ + 0x20d000a /*KEY_DOWN*/ + 0x20e0001 /*KEY_0*/ + 0x20f006a /*KEY_RIGHT*/ + 0x3010061 /*KEY_RIGHTCTRL*/ + 0x302001f /*KEY_S*/ + 0x303001e /*KEY_A*/ + 0x3040020 /*KEY_D*/ + 0x3050021 /*KEY_F*/ + 0x3070024 /*KEY_J*/ + 0x3080025 /*KEY_K*/ + 0x30c001c /*KEY_ENTER*/ + 0x30d0026 /*KEY_L*/ + 0x30e0027 /*KEY_SEMICOLON*/ + 0x400002a /*KEY_LEFTSHIFT*/ + 0x402002d /*KEY_X*/ + 0x403002c /*KEY_Z*/ + 0x404002e /*KEY_C*/ + 0x405002f /*KEY_V/ + 0x4070032 /*KEY_M*/ + 0x4080033 /*KEY_COMMA*/ + 0x40c0039 /*KEY_SPACE*/ + 0x40d0033 /*KEY_DOT*/ + 0x40e0035 /*KEY_SLASH*/ + 0x40f006b /*KEY_END*/ + 0x501001d /*KEY_LEFTCTRL*/ + 0x5020040 /*KEY_F6*/ + 0x503000f /*KEY_TAB*/ + 0x504003d /*KEY_F3*/ + 0x5050014 /*KEY_T*/ + 0x5070015 /*KEY_Y*/ + 0x508001a /*KEY_LEFTBRACE*/ + 0x50d0044 /*KEY_F10*/ + 0x50e001b /*KEY_RIGHTBRACE*/ + 0x50f0066 /*KEY_HOME*/ + 0x602003f /*KEY_F5*/ + 0x604003c /*KEY_F2*/ + 0x6050006 /*KEY_5*/ + 0x60601d0 /*KEY_FN*/ + 0x6070007 /*KEY_6*/ + 0x60a008b /*KEY_MENU*/ + 0x60c002b /*KEY_BACKSLASH*/ + 0x60d0043 /*KEY_F9*/ + 0x7020042 /*KEY_F8*/ + 0x703003a /*KEY_CAPSLOCK*/ + 0x704003b /*KEY_F1*/ + 0x7050030 /*KEY_B*/ + 0x7070031 /*KEY_N*/ + 0x70b0038 /*KEY_LEFTALT*/ + 0x70d0058 /*KEY_F12*/ + 0x70f006f >; /*KEY_DELETE*/ + linux,input-no-autorepeat; + }; + }; +};
Add keypad data node in omap5-evm. Based on I2C support patch for omap5, which has been already posted as a different series. Cc: Benoit Cousson <b-cousson@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested on omap5430 sdp with 3.5 custom kernel. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> --- arch/arm/boot/dts/omap5-evm.dts | 95 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 95 insertions(+), 0 deletions(-)