diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index ea036d6..e613536 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -16,12 +16,6 @@ config ARCH_CDB89712
 	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
 	  headers.  It comes with 16 MB SDRAM and 8 MB flash ROM.
 
-config ARCH_CEIVA
-	bool "CEIVA"
-	help
-	  Say Y here if you intend to run this kernel on the Ceiva/Polaroid
-	  PhotoMax Digital Picture Frame.
-
 config ARCH_CLEP7312
 	bool "CLEP7312"
 	help
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index f2f0256..aed9eb6 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -9,7 +9,6 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
-obj-$(CONFIG_ARCH_CEIVA) += ceiva.o
 obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o
 obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
deleted file mode 100644
index a70147e..0000000
--- a/arch/arm/mach-clps711x/ceiva.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  linux/arch/arm/mach-clps711x/arch-ceiva.c
- *
- *  Copyright (C) 2002, Rob Scott <rscott@mtrob.fdns.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <linux/kernel.h>
-
-#include <mach/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct map_desc ceiva_io_desc[] __initdata = {
- 	/* SED1355 controlled video RAM & registers */
- 	{
-		.virtual	= CEIVA_VIRT_SED1355,
-		.pfn		= __phys_to_pfn(CEIVA_PHYS_SED1355),
-		.length		= SZ_2M,
-		.type		= MT_DEVICE
-	}
-};
-
-
-static void __init ceiva_map_io(void)
-{
-        clps711x_map_io();
-        iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc));
-}
-
-
-MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
-	/* Maintainer: Rob Scott */
-	.atag_offset	= 0x100,
-	.map_io		= ceiva_map_io,
-	.init_irq	= clps711x_init_irq,
-	.timer		= &clps711x_timer,
-	.restart	= clps711x_restart,
-MACHINE_END
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index 13a64fc..8497775 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -116,7 +116,6 @@
 
 #endif /* CONFIG_ARCH_EDB7211 */
 
-
 /*
  * Relevant bits in port D, which controls power to the various parts of
  * the LCD on the EDB7211.
@@ -125,51 +124,4 @@
 #define EDB_PD2_LCDEN		(1<<2)
 #define EDB_PD3_LCDBL		(1<<3)
 
-
-#if defined (CONFIG_ARCH_CEIVA)
-
-/*
- * The two flash banks are wired to chip selects 0 and 1. This is the mapping
- * for them.
- *
- * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
- * in jumpered boot mode.
- */
-#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
-#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
-
-#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
-#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
-
-#define CEIVA_FLASH_SIZE        0x100000
-#define CEIVA_FLASH_WIDTH       2
-
-/*
- * SED1355 LCD controller
- */
-#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
-#define CEIVA_VIRT_SED1355	(0xfc000000)
-
-/*
- * Relevant bits in port D, which controls power to the various parts of
- * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
- */
-
-// Reset line to SED1355 (must be high to operate)
-#define CEIVA_PD1_LCDRST	(1<<1)
-// LCD panel enable (set to one, to enable LCD)
-#define CEIVA_PD4_LCDEN		(1<<4)
-// Backlight (set to one, to turn on backlight
-#define CEIVA_PD5_LCDBL		(1<<5)
-
-/*
- * Relevant bits in port B, which report the status of the buttons.
- */
-
-// White button
-#define CEIVA_PB4_WHT_BTN	(1<<4)
-// Black button
-#define CEIVA_PB0_BLK_BTN	(1<<0)
-#endif // #if defined (CONFIG_ARCH_CEIVA)
-
 #endif
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 2997e56..ae87c5e 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -66,7 +66,6 @@ iq80321			ARCH_IQ80321		IQ80321			169
 ks8695			ARCH_KS8695		KS8695			180
 karo			ARCH_KARO		KARO			190
 smdk2410		ARCH_SMDK2410		SMDK2410		193
-ceiva			ARCH_CEIVA		CEIVA			200
 voiceblue		MACH_VOICEBLUE		VOICEBLUE		218
 h5400			ARCH_H5400		H5400			220
 omap_innovator		MACH_OMAP_INNOVATOR	OMAP_INNOVATOR		234
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0217f74..8c17adb 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -979,18 +979,6 @@ config FB_PVR2
 	  (<file:drivers/video/pvr2fb.c>). Please see the file
 	  <file:Documentation/fb/pvr2fb.txt>.
 
-config FB_EPSON1355
-	bool "Epson 1355 framebuffer support"
-	depends on (FB = y) && ARCH_CEIVA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Build in support for the SED1355 Epson Research Embedded RAMDAC
-	  LCD/CRT Controller (since redesignated as the S1D13505) as a
-	  framebuffer.  Product specs at
-	  <http://vdc.epson.com/>.
-
 config FB_S1D13XXX
 	tristate "Epson S1D13XXX framebuffer support"
 	depends on FB
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index ee8dafb..1940359 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -94,7 +94,6 @@ obj-$(CONFIG_FB_G364)             += g364fb.o
 obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
 obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
 obj-$(CONFIG_FB_HIT)              += hitfb.o
-obj-$(CONFIG_FB_EPSON1355)	  += epson1355fb.o
 obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
 obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c
deleted file mode 100644
index 68b9b51..0000000
--- a/drivers/video/epson1355fb.c
+++ /dev/null
@@ -1,749 +0,0 @@
-/*
- * linux/drivers/video/epson1355fb.c -- Epson S1D13505 frame buffer for 2.5.
- *
- * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller
- *   (previously known as SED1355)
- *
- * Cf. http://vdc.epson.com/
- *
- *
- * Copyright (C) Hewlett-Packard Company.  All rights reserved.
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- *
- * Adapted from:
- *
- *  linux/drivers/video/skeletonfb.c
- *  Modified to new api Jan 2001 by James Simmons (jsimmons@infradead.org)
- *  Created 28 Dec 1997 by Geert Uytterhoeven
- *
- *  linux/drivers/video/epson1355fb.c (2.4 driver)
- *  Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- *
- * Noteworthy Issues
- * -----------------
- *
- * This driver is complicated by the fact that this is a 16-bit chip
- * and, on at least one platform (ceiva), we can only do 16-bit reads
- * and writes to the framebuffer.  We hide this from user space
- * except in the case of mmap().
- *
- *
- * To Do
- * -----
- *
- * - Test 8-bit pseudocolor mode
- * - Allow setting bpp, virtual resolution
- * - Implement horizontal panning
- * - (maybe) Implement hardware cursor
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/fb.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include <linux/uaccess.h>
-
-#include <video/epson1355.h>
-
-struct epson1355_par {
-	unsigned long reg_addr;
-	u32 pseudo_palette[16];
-};
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_ARM)
-
-# ifdef CONFIG_ARCH_CEIVA
-#  include <mach/hardware.h>
-#  define EPSON1355FB_BASE_PHYS	(CEIVA_PHYS_SED1355)
-# endif
-
-static inline u8 epson1355_read_reg(struct epson1355_par *par, int index)
-{
-	return __raw_readb(par->reg_addr + index);
-}
-
-static inline void epson1355_write_reg(struct epson1355_par *par, u8 data, int index)
-{
-	__raw_writeb(data, par->reg_addr + index);
-}
-
-#else
-# error "no architecture-specific epson1355_{read,write}_reg"
-#endif
-
-#ifndef EPSON1355FB_BASE_PHYS
-# error  "EPSON1355FB_BASE_PHYS is not defined"
-#endif
-
-#define EPSON1355FB_REGS_OFS	(0)
-#define EPSON1355FB_REGS_PHYS	(EPSON1355FB_BASE_PHYS + EPSON1355FB_REGS_OFS)
-#define EPSON1355FB_REGS_LEN	(64)
-
-#define EPSON1355FB_FB_OFS	(0x00200000)
-#define EPSON1355FB_FB_PHYS	(EPSON1355FB_BASE_PHYS + EPSON1355FB_FB_OFS)
-#define EPSON1355FB_FB_LEN	(2 * 1024 * 1024)
-
-/* ------------------------------------------------------------------------- */
-
-static inline u16 epson1355_read_reg16(struct epson1355_par *par, int index)
-{
-	u8 lo = epson1355_read_reg(par, index);
-	u8 hi = epson1355_read_reg(par, index + 1);
-
-	return (hi << 8) | lo;
-}
-
-static inline void epson1355_write_reg16(struct epson1355_par *par, u16 data, int index)
-{
-	u8 lo = data & 0xff;
-	u8 hi = (data >> 8) & 0xff;
-
-	epson1355_write_reg(par, lo, index);
-	epson1355_write_reg(par, hi, index + 1);
-}
-
-static inline u32 epson1355_read_reg20(struct epson1355_par *par, int index)
-{
-	u8 b0 = epson1355_read_reg(par, index);
-	u8 b1 = epson1355_read_reg(par, index + 1);
-	u8 b2 = epson1355_read_reg(par, index + 2);
-
-	return (b2 & 0x0f) << 16 | (b1 << 8) | b0;
-}
-
-static inline void epson1355_write_reg20(struct epson1355_par *par, u32 data, int index)
-{
-	u8 b0 = data & 0xff;
-	u8 b1 = (data >> 8) & 0xff;
-	u8 b2 = (data >> 16) & 0x0f;
-
-	epson1355_write_reg(par, b0, index);
-	epson1355_write_reg(par, b1, index + 1);
-	epson1355_write_reg(par, b2, index + 2);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void set_lut(struct epson1355_par *par, u8 index, u8 r, u8 g, u8 b)
-{
-	epson1355_write_reg(par, index, REG_LUT_ADDR);
-	epson1355_write_reg(par, r, REG_LUT_DATA);
-	epson1355_write_reg(par, g, REG_LUT_DATA);
-	epson1355_write_reg(par, b, REG_LUT_DATA);
-}
-
-
-/**
- *  	epson1355fb_setcolreg - sets a color register.
- *      @regno: Which register in the CLUT we are programming
- *      @red: The red value which can be up to 16 bits wide
- *	@green: The green value which can be up to 16 bits wide
- *	@blue:  The blue value which can be up to 16 bits wide.
- *	@transp: If supported the alpha value which can be up to 16 bits wide.
- *      @info: frame buffer info structure
- *
- *	Returns negative errno on error, or zero on success.
- */
-static int epson1355fb_setcolreg(unsigned regno, unsigned r, unsigned g,
-				 unsigned b, unsigned transp,
-				 struct fb_info *info)
-{
-	struct epson1355_par *par = info->par;
-
-	if (info->var.grayscale)
-		r = g = b = (19595 * r + 38470 * g + 7471 * b) >> 16;
-
-	switch (info->fix.visual) {
-	case FB_VISUAL_TRUECOLOR:
-		if (regno >= 16)
-			return -EINVAL;
-
-		((u32 *) info->pseudo_palette)[regno] =
-		    (r & 0xf800) | (g & 0xfc00) >> 5 | (b & 0xf800) >> 11;
-
-		break;
-	case FB_VISUAL_PSEUDOCOLOR:
-		if (regno >= 256)
-			return -EINVAL;
-
-		set_lut(par, regno, r >> 8, g >> 8, b >> 8);
-
-		break;
-	default:
-		return -ENOSYS;
-	}
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/**
- *      epson1355fb_pan_display - Pans the display.
- *      @var: frame buffer variable screen structure
- *      @info: frame buffer structure that represents a single frame buffer
- *
- *	Pan (or wrap, depending on the `vmode' field) the display using the
- *  	`xoffset' and `yoffset' fields of the `var' structure.
- *  	If the values don't fit, return -EINVAL.
- *
- *      Returns negative errno on error, or zero on success.
- */
-static int epson1355fb_pan_display(struct fb_var_screeninfo *var,
-				   struct fb_info *info)
-{
-	struct epson1355_par *par = info->par;
-	u32 start;
-
-	if (var->xoffset != 0)	/* not yet ... */
-		return -EINVAL;
-
-	if (var->yoffset + info->var.yres > info->var.yres_virtual)
-		return -EINVAL;
-
-	start = (info->fix.line_length >> 1) * var->yoffset;
-
-	epson1355_write_reg20(par, start, REG_SCRN1_DISP_START_ADDR0);
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void lcd_enable(struct epson1355_par *par, int enable)
-{
-	u8 mode = epson1355_read_reg(par, REG_DISPLAY_MODE);
-
-	if (enable)
-		mode |= 1;
-	else
-		mode &= ~1;
-
-	epson1355_write_reg(par, mode, REG_DISPLAY_MODE);
-}
-
-#if defined(CONFIG_ARCH_CEIVA)
-static void backlight_enable(int enable)
-{
-	/* ### this should be protected by a spinlock ... */
-	u8 pddr = clps_readb(PDDR);
-	if (enable)
-		pddr |= (1 << 5);
-	else
-		pddr &= ~(1 << 5);
-	clps_writeb(pddr, PDDR);
-}
-#else
-static void backlight_enable(int enable)
-{
-}
-#endif
-
-
-/**
- *      epson1355fb_blank - blanks the display.
- *      @blank_mode: the blank mode we want.
- *      @info: frame buffer structure that represents a single frame buffer
- *
- *      Blank the screen if blank_mode != 0, else unblank. Return 0 if
- *      blanking succeeded, != 0 if un-/blanking failed due to e.g. a
- *      video mode which doesn't support it. Implements VESA suspend
- *      and powerdown modes on hardware that supports disabling hsync/vsync:
- *      blank_mode == 2: suspend vsync
- *      blank_mode == 3: suspend hsync
- *      blank_mode == 4: powerdown
- *
- *      Returns negative errno on error, or zero on success.
- *
- */
-static int epson1355fb_blank(int blank_mode, struct fb_info *info)
-{
-	struct epson1355_par *par = info->par;
-
-	switch (blank_mode) {
-	case FB_BLANK_UNBLANK:
-	case FB_BLANK_NORMAL:
-		lcd_enable(par, 1);
-		backlight_enable(1);
-		break;
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-		backlight_enable(0);
-		break;
-	case FB_BLANK_POWERDOWN:
-		backlight_enable(0);
-		lcd_enable(par, 0);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* let fbcon do a soft blank for us */
-	return (blank_mode == FB_BLANK_NORMAL) ? 1 : 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * We can't use the cfb generic routines, as we have to limit
- * ourselves to 16-bit or 8-bit loads and stores to this 16-bit
- * chip.
- */
-
-static inline void epson1355fb_fb_writel(unsigned long v, unsigned long *a)
-{
-	u16 *p = (u16 *) a;
-	u16 l = v & 0xffff;
-	u16 h = v >> 16;
-
-	fb_writew(l, p);
-	fb_writew(h, p + 1);
-}
-
-static inline unsigned long epson1355fb_fb_readl(const unsigned long *a)
-{
-	const u16 *p = (u16 *) a;
-	u16 l = fb_readw(p);
-	u16 h = fb_readw(p + 1);
-
-	return (h << 16) | l;
-}
-
-#define FB_READL epson1355fb_fb_readl
-#define FB_WRITEL epson1355fb_fb_writel
-
-/* ------------------------------------------------------------------------- */
-
-static inline unsigned long copy_from_user16(void *to, const void *from,
-					     unsigned long n)
-{
-	u16 *dst = (u16 *) to;
-	u16 *src = (u16 *) from;
-
-	if (!access_ok(VERIFY_READ, from, n))
-		return n;
-
-	while (n > 1) {
-		u16 v;
-		if (__get_user(v, src))
-			return n;
-
-		fb_writew(v, dst);
-
-		src++, dst++;
-		n -= 2;
-	}
-
-	if (n) {
-		u8 v;
-
-		if (__get_user(v, ((u8 *) src)))
-			return n;
-
-		fb_writeb(v, dst);
-	}
-	return 0;
-}
-
-static inline unsigned long copy_to_user16(void *to, const void *from,
-					   unsigned long n)
-{
-	u16 *dst = (u16 *) to;
-	u16 *src = (u16 *) from;
-
-	if (!access_ok(VERIFY_WRITE, to, n))
-		return n;
-
-	while (n > 1) {
-		u16 v = fb_readw(src);
-
-		if (__put_user(v, dst))
-			return n;
-
-		src++, dst++;
-		n -= 2;
-	}
-
-	if (n) {
-		u8 v = fb_readb(src);
-
-		if (__put_user(v, ((u8 *) dst)))
-			return n;
-	}
-	return 0;
-}
-
-
-static ssize_t
-epson1355fb_read(struct fb_info *info, char *buf, size_t count, loff_t * ppos)
-{
-	unsigned long p = *ppos;
-
-	if (p >= info->fix.smem_len)
-		return 0;
-	if (count >= info->fix.smem_len)
-		count = info->fix.smem_len;
-	if (count + p > info->fix.smem_len)
-		count = info->fix.smem_len - p;
-
-	if (count) {
-		char *base_addr;
-
-		base_addr = info->screen_base;
-		count -= copy_to_user16(buf, base_addr + p, count);
-		if (!count)
-			return -EFAULT;
-		*ppos += count;
-	}
-	return count;
-}
-
-static ssize_t
-epson1355fb_write(struct fb_info *info, const char *buf,
-		  size_t count, loff_t * ppos)
-{
-	unsigned long p = *ppos;
-	int err;
-
-	/* from fbmem.c except for our own copy_*_user */
-	if (p > info->fix.smem_len)
-		return -ENOSPC;
-	if (count >= info->fix.smem_len)
-		count = info->fix.smem_len;
-	err = 0;
-	if (count + p > info->fix.smem_len) {
-		count = info->fix.smem_len - p;
-		err = -ENOSPC;
-	}
-
-	if (count) {
-		char *base_addr;
-
-		base_addr = info->screen_base;
-		count -= copy_from_user16(base_addr + p, buf, count);
-		*ppos += count;
-		err = -EFAULT;
-	}
-	if (count)
-		return count;
-	return err;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static struct fb_ops epson1355fb_fbops = {
-	.owner 		= THIS_MODULE,
-	.fb_setcolreg 	= epson1355fb_setcolreg,
-	.fb_pan_display = epson1355fb_pan_display,
-	.fb_blank 	= epson1355fb_blank,
-	.fb_fillrect 	= cfb_fillrect,
-	.fb_copyarea 	= cfb_copyarea,
-	.fb_imageblit 	= cfb_imageblit,
-	.fb_read 	= epson1355fb_read,
-	.fb_write 	= epson1355fb_write,
-};
-
-/* ------------------------------------------------------------------------- */
-
-static __init unsigned int get_fb_size(struct fb_info *info)
-{
-	unsigned int size = 2 * 1024 * 1024;
-	char *p = info->screen_base;
-
-	/* the 512k framebuffer is aliased at start + 0x80000 * n */
-	fb_writeb(1, p);
-	fb_writeb(0, p + 0x80000);
-	if (!fb_readb(p))
-		size = 512 * 1024;
-
-	fb_writeb(0, p);
-
-	return size;
-}
-
-static int epson1355_width_tab[2][4] __devinitdata =
-    { {4, 8, 16, -1}, {9, 12, 16, -1} };
-static int epson1355_bpp_tab[8] __devinitdata = { 1, 2, 4, 8, 15, 16 };
-
-static void __devinit fetch_hw_state(struct fb_info *info, struct epson1355_par *par)
-{
-	struct fb_var_screeninfo *var = &info->var;
-	struct fb_fix_screeninfo *fix = &info->fix;
-	u8 panel, display;
-	u16 offset;
-	u32 xres, yres;
-	u32 xres_virtual, yres_virtual;
-	int bpp, lcd_bpp;
-	int is_color, is_dual, is_tft;
-	int lcd_enabled, crt_enabled;
-
-	fix->type = FB_TYPE_PACKED_PIXELS;
-
-	display = epson1355_read_reg(par, REG_DISPLAY_MODE);
-	bpp = epson1355_bpp_tab[(display >> 2) & 7];
-
-	switch (bpp) {
-	case 8:
-		fix->visual = FB_VISUAL_PSEUDOCOLOR;
-		var->bits_per_pixel = 8;
-		var->red.offset = var->green.offset = var->blue.offset = 0;
-		var->red.length = var->green.length = var->blue.length = 8;
-		break;
-	case 16:
-		/* 5-6-5 RGB */
-		fix->visual = FB_VISUAL_TRUECOLOR;
-		var->bits_per_pixel = 16;
-		var->red.offset = 11;
-		var->red.length = 5;
-		var->green.offset = 5;
-		var->green.length = 6;
-		var->blue.offset = 0;
-		var->blue.length = 5;
-		break;
-	default:
-		BUG();
-	}
-	fb_alloc_cmap(&(info->cmap), 256, 0);
-
-	panel = epson1355_read_reg(par, REG_PANEL_TYPE);
-	is_color = (panel & 0x04) != 0;
-	is_dual = (panel & 0x02) != 0;
-	is_tft = (panel & 0x01) != 0;
-	crt_enabled = (display & 0x02) != 0;
-	lcd_enabled = (display & 0x01) != 0;
-	lcd_bpp = epson1355_width_tab[is_tft][(panel >> 4) & 3];
-
-	xres = (epson1355_read_reg(par, REG_HORZ_DISP_WIDTH) + 1) * 8;
-	yres = (epson1355_read_reg16(par, REG_VERT_DISP_HEIGHT0) + 1) *
-	    ((is_dual && !crt_enabled) ? 2 : 1);
-	offset = epson1355_read_reg16(par, REG_MEM_ADDR_OFFSET0) & 0x7ff;
-	xres_virtual = offset * 16 / bpp;
-	yres_virtual = fix->smem_len / (offset * 2);
-
-	var->xres = xres;
-	var->yres = yres;
-	var->xres_virtual = xres_virtual;
-	var->yres_virtual = yres_virtual;
-	var->xoffset = var->yoffset = 0;
-
-	fix->line_length = offset * 2;
-
-	fix->xpanstep = 0;	/* no pan yet */
-	fix->ypanstep = 1;
-	fix->ywrapstep = 0;
-	fix->accel = FB_ACCEL_NONE;
-
-	var->grayscale = !is_color;
-
-#ifdef DEBUG
-	printk(KERN_INFO
-	       "epson1355fb: xres=%d, yres=%d, "
-	       "is_color=%d, is_dual=%d, is_tft=%d\n",
-	       xres, yres, is_color, is_dual, is_tft);
-	printk(KERN_INFO
-	       "epson1355fb: bpp=%d, lcd_bpp=%d, "
-	       "crt_enabled=%d, lcd_enabled=%d\n",
-	       bpp, lcd_bpp, crt_enabled, lcd_enabled);
-#endif
-}
-
-
-static void clearfb16(struct fb_info *info)
-{
-	u16 *dst = (u16 *) info->screen_base;
-	unsigned long n = info->fix.smem_len;
-
-	while (n > 1) {
-		fb_writew(0, dst);
-		dst++, n -= 2;
-	}
-
-	if (n)
-		fb_writeb(0, dst);
-}
-
-static int epson1355fb_remove(struct platform_device *dev)
-{
-	struct fb_info *info = platform_get_drvdata(dev);
-	struct epson1355_par *par = info->par;
-
-	backlight_enable(0);
-	if (par) {
-		lcd_enable(par, 0);
-		if (par && par->reg_addr)
-			iounmap((void *) par->reg_addr);
-	}
-
-	if (info) {
-		fb_dealloc_cmap(&info->cmap);
-		if (info->screen_base)
-			iounmap(info->screen_base);
-		framebuffer_release(info);
-	}
-	release_mem_region(EPSON1355FB_FB_PHYS, EPSON1355FB_FB_LEN);
-	release_mem_region(EPSON1355FB_REGS_PHYS, EPSON1355FB_REGS_LEN);
-	return 0;
-}
-
-static int __devinit epson1355fb_probe(struct platform_device *dev)
-{
-	struct epson1355_par *default_par;
-	struct fb_info *info;
-	u8 revision;
-	int rc = 0;
-
-	if (!request_mem_region(EPSON1355FB_REGS_PHYS, EPSON1355FB_REGS_LEN, "S1D13505 registers")) {
-		printk(KERN_ERR "epson1355fb: unable to reserve "
-		       "registers at 0x%0x\n", EPSON1355FB_REGS_PHYS);
-		rc = -EBUSY;
-		goto bail;
-	}
-
-	if (!request_mem_region(EPSON1355FB_FB_PHYS, EPSON1355FB_FB_LEN,
-				"S1D13505 framebuffer")) {
-		printk(KERN_ERR "epson1355fb: unable to reserve "
-		       "framebuffer at 0x%0x\n", EPSON1355FB_FB_PHYS);
-		rc = -EBUSY;
-		goto bail;
-	}
-
-	info = framebuffer_alloc(sizeof(struct epson1355_par), &dev->dev);
-	if (!info) {
-		rc = -ENOMEM;
-		goto bail;
-	}
-
-	default_par = info->par;
-	default_par->reg_addr = (unsigned long) ioremap(EPSON1355FB_REGS_PHYS, EPSON1355FB_REGS_LEN);
-	if (!default_par->reg_addr) {
-		printk(KERN_ERR "epson1355fb: unable to map registers\n");
-		rc = -ENOMEM;
-		goto bail;
-	}
-	info->pseudo_palette = default_par->pseudo_palette;
-
-	info->screen_base = ioremap(EPSON1355FB_FB_PHYS, EPSON1355FB_FB_LEN);
-	if (!info->screen_base) {
-		printk(KERN_ERR "epson1355fb: unable to map framebuffer\n");
-		rc = -ENOMEM;
-		goto bail;
-	}
-
-	revision = epson1355_read_reg(default_par, REG_REVISION_CODE);
-	if ((revision >> 2) != 3) {
-		printk(KERN_INFO "epson1355fb: epson1355 not found\n");
-		rc = -ENODEV;
-		goto bail;
-	}
-
-	info->fix.mmio_start = EPSON1355FB_REGS_PHYS;
-	info->fix.mmio_len = EPSON1355FB_REGS_LEN;
-	info->fix.smem_start = EPSON1355FB_FB_PHYS;
-	info->fix.smem_len = get_fb_size(info);
-
-	printk(KERN_INFO "epson1355fb: regs mapped at 0x%lx, fb %d KiB mapped at 0x%p\n",
-	       default_par->reg_addr, info->fix.smem_len / 1024, info->screen_base);
-
-	strcpy(info->fix.id, "S1D13505");
-	info->par = default_par;
-	info->fbops = &epson1355fb_fbops;
-	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
-
-	/* we expect the boot loader to have initialized the chip
-	   with appropriate parameters from which we can determinte
-	   the flavor of lcd panel attached */
-	fetch_hw_state(info, default_par);
-
-	/* turn this puppy on ... */
-	clearfb16(info);
-	backlight_enable(1);
-	lcd_enable(default_par, 1);
-
-	if (register_framebuffer(info) < 0) {
-		rc = -EINVAL;
-		goto bail;
-	}
-	/*
-	 * Our driver data.
-	 */
-	platform_set_drvdata(dev, info);
-
-	printk(KERN_INFO "fb%d: %s frame buffer device\n",
-	       info->node, info->fix.id);
-
-	return 0;
-
-      bail:
-	epson1355fb_remove(dev);
-	return rc;
-}
-
-static struct platform_driver epson1355fb_driver = {
-	.probe	= epson1355fb_probe,
-	.remove	= epson1355fb_remove,
-	.driver	= {
-		.name	= "epson1355fb",
-	},
-};
-
-static struct platform_device *epson1355fb_device;
-
-int __init epson1355fb_init(void)
-{
-	int ret = 0;
-
-	if (fb_get_options("epson1355fb", NULL))
-		return -ENODEV;
-
-	ret = platform_driver_register(&epson1355fb_driver);
-
-	if (!ret) {
-		epson1355fb_device = platform_device_alloc("epson1355fb", 0);
-
-		if (epson1355fb_device)
-			ret = platform_device_add(epson1355fb_device);
-		else
-			ret = -ENOMEM;
-
-		if (ret) {
-			platform_device_put(epson1355fb_device);
-			platform_driver_unregister(&epson1355fb_driver);
-		}
-	}
-
-	return ret;
-}
-
-module_init(epson1355fb_init);
-	
-#ifdef MODULE
-static void __exit epson1355fb_exit(void)
-{
-	platform_device_unregister(epson1355fb_device);
-	platform_driver_unregister(&epson1355fb_driver);
-}
-
-/* ------------------------------------------------------------------------- */
-
-module_exit(epson1355fb_exit);
-#endif
-
-MODULE_AUTHOR("Christopher Hoover <ch@hpl.hp.com>");
-MODULE_DESCRIPTION("Framebuffer driver for Epson S1D13505");
-MODULE_LICENSE("GPL");
diff --git a/include/video/epson1355.h b/include/video/epson1355.h
deleted file mode 100644
index 9759f29..0000000
--- a/include/video/epson1355.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/video/epson13xx.h -- Epson 13xx frame buffer
- *
- * Copyright (C) Hewlett-Packard Company.  All rights reserved.
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- *
- */
-
-#ifndef _EPSON13XX_H_
-#define _EPSON13XX_H_
-
-#define REG_REVISION_CODE              0x00
-#define REG_MEMORY_CONFIG              0x01
-#define REG_PANEL_TYPE                 0x02
-#define REG_MOD_RATE                   0x03
-#define REG_HORZ_DISP_WIDTH            0x04
-#define REG_HORZ_NONDISP_PERIOD        0x05
-#define REG_HRTC_START_POSITION        0x06
-#define REG_HRTC_PULSE_WIDTH           0x07
-#define REG_VERT_DISP_HEIGHT0          0x08
-#define REG_VERT_DISP_HEIGHT1          0x09
-#define REG_VERT_NONDISP_PERIOD        0x0A
-#define REG_VRTC_START_POSITION        0x0B
-#define REG_VRTC_PULSE_WIDTH           0x0C
-#define REG_DISPLAY_MODE               0x0D
-#define REG_SCRN1_LINE_COMPARE0        0x0E
-#define REG_SCRN1_LINE_COMPARE1        0x0F
-#define REG_SCRN1_DISP_START_ADDR0     0x10
-#define REG_SCRN1_DISP_START_ADDR1     0x11
-#define REG_SCRN1_DISP_START_ADDR2     0x12
-#define REG_SCRN2_DISP_START_ADDR0     0x13
-#define REG_SCRN2_DISP_START_ADDR1     0x14
-#define REG_SCRN2_DISP_START_ADDR2     0x15
-#define REG_MEM_ADDR_OFFSET0           0x16
-#define REG_MEM_ADDR_OFFSET1           0x17
-#define REG_PIXEL_PANNING              0x18
-#define REG_CLOCK_CONFIG               0x19
-#define REG_POWER_SAVE_CONFIG          0x1A
-#define REG_MISC                       0x1B
-#define REG_MD_CONFIG_READBACK0        0x1C
-#define REG_MD_CONFIG_READBACK1        0x1D
-#define REG_GPIO_CONFIG0               0x1E
-#define REG_GPIO_CONFIG1               0x1F
-#define REG_GPIO_CONTROL0              0x20
-#define REG_GPIO_CONTROL1              0x21
-#define REG_PERF_ENHANCEMENT0          0x22
-#define REG_PERF_ENHANCEMENT1          0x23
-#define REG_LUT_ADDR                   0x24
-#define REG_RESERVED_1                 0x25
-#define REG_LUT_DATA                   0x26
-#define REG_INK_CURSOR_CONTROL         0x27
-#define REG_CURSOR_X_POSITION0         0x28
-#define REG_CURSOR_X_POSITION1         0x29
-#define REG_CURSOR_Y_POSITION0         0x2A
-#define REG_CURSOR_Y_POSITION1         0x2B
-#define REG_INK_CURSOR_COLOR0_0        0x2C
-#define REG_INK_CURSOR_COLOR0_1        0x2D
-#define REG_INK_CURSOR_COLOR1_0        0x2E
-#define REG_INK_CURSOR_COLOR1_1        0x2F
-#define REG_INK_CURSOR_START_ADDR      0x30
-#define REG_ALTERNATE_FRM              0x31
-
-#endif
