| Message ID | 1345852300-2213-1-git-send-email-marex@denx.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Sat, Aug 25, 2012 at 01:51:37AM +0200, Marek Vasut wrote: > Add this SSP port 2 pin multiplexing configuration into the imx28.dtsi file. > > Signed-off-by: Marek Vasut <marex@denx.de> > Cc: Chris Ball <cjb@laptop.org> > Cc: Fabio Estevam <fabio.estevam@freescale.com> > Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> > Cc: Shawn Guo <shawn.guo@linaro.org> Applied, thanks.
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 91b43e9..b996c2d 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -507,6 +507,19 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ + 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ + 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ + 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; digctl@8001c000 {
Add this SSP port 2 pin multiplexing configuration into the imx28.dtsi file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chris Ball <cjb@laptop.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/boot/dts/imx28.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) V2: Add only SSP2 pinmux.