From patchwork Wed Aug 29 18:27:22 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 1385861 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork1.kernel.org (Postfix) with ESMTP id 7D1373FDF5 for ; Wed, 29 Aug 2012 19:48:51 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1T6oCQ-0003Ah-Rv; Wed, 29 Aug 2012 19:45:14 +0000 Received: from mail.df.lth.se ([194.47.250.12]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1T6oCD-00039q-UQ for linux-arm-kernel@lists.infradead.org; Wed, 29 Aug 2012 19:45:04 +0000 Received: from mer.df.lth.se (mer.df.lth.se [194.47.250.37]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.df.lth.se (Postfix) with ESMTPS id 281DE65D7E; Wed, 29 Aug 2012 20:27:25 +0200 (CEST) Received: from mer.df.lth.se (triad@localhost.localdomain [127.0.0.1]) by mer.df.lth.se (8.14.3/8.14.3/Debian-9.4) with ESMTP id q7TIROjC020439; Wed, 29 Aug 2012 20:27:24 +0200 Received: (from triad@localhost) by mer.df.lth.se (8.14.3/8.14.3/Submit) id q7TIROlH020438; Wed, 29 Aug 2012 20:27:24 +0200 From: Linus Walleij To: linux-arm-kernel@lists.infradead.org, khc@pm.waw.pl, Daniel Silverstone , Simtec Linux Team Subject: [PATCH 4/4] ARM: ks8695: convert to generic time and clocksource Date: Wed, 29 Aug 2012 20:27:22 +0200 Message-Id: <1346264842-20411-1-git-send-email-linus.walleij@linaro.org> X-Mailer: git-send-email 1.7.2.5 X-Spam-Note: CRM114 invocation failed X-Spam-Score: -2.8 (--) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-2.8 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low trust [194.47.250.12 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -0.2 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Thomas Gleixner , arm@kernel.org, Linus Walleij , Ben Dooks X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Old platforms using ancient gettimeoffset() and other arcane APIs are standing in the way of cleaning up the ARM kernel. This is an attempt at blind-coding a generic time and clocksource driver for the platform by way of a datasheet and looking at the old code, it'd be great if someone who is actually using this machine could test it. If noone volunteers to do this I will instead propose a patch deleting the machine altogether. Signed-off-by: Linus Walleij --- arch/arm/Kconfig | 3 +- arch/arm/mach-ks8695/time.c | 123 ++++++++++++++++++++++++++++++------------- 2 files changed, 88 insertions(+), 38 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c5f9ae5..181b697 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -652,8 +652,9 @@ config ARCH_KS8695 bool "Micrel/Kendin KS8695" select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c index 6974c23..1a933f1 100644 --- a/arch/arm/mach-ks8695/time.c +++ b/arch/arm/mach-ks8695/time.c @@ -25,6 +25,8 @@ #include #include #include +#include +#include #include #include @@ -53,44 +55,68 @@ /* Timer0 Timeout Counter Register */ #define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ -/* - * Returns number of ms since last clock interrupt. Note that interrupts - * will have been disabled by do_gettimeoffset() - */ -static unsigned long ks8695_gettimeoffset (void) +static void ks8695_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) { - unsigned long elapsed, tick2, intpending; + if (mode == CLOCK_EVT_FEAT_PERIODIC) { + u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); + u32 half = DIV_ROUND_CLOSEST(rate, 2); + u32 tmcon; + + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); + + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + } +} - /* - * Get the current number of ticks. Note that there is a race - * condition between us reading the timer and checking for an - * interrupt. We solve this by ensuring that the counter has not - * reloaded between our two reads. - */ - elapsed = readl_relaxed(KS8695_TMR_VA + KS8695_T1TC) + readl_relaxed(KS8695_TMR_VA + KS8695_T1PD); - do { - tick2 = elapsed; - intpending = readl_relaxed(KS8695_IRQ_VA + KS8695_INTST) & (1 << KS8695_IRQ_TIMER1); - elapsed = readl_relaxed(KS8695_TMR_VA + KS8695_T1TC) + readl_relaxed(KS8695_TMR_VA + KS8695_T1PD); - } while (elapsed > tick2); - - /* Convert to number of ticks expired (not remaining) */ - elapsed = (CLOCK_TICK_RATE / HZ) - elapsed; - - /* Is interrupt pending? If so, then timer has been reloaded already. */ - if (intpending) - elapsed += (CLOCK_TICK_RATE / HZ); - - /* Convert ticks to usecs */ - return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH; +static int ks8695_set_next_event(unsigned long cycles, + struct clock_event_device *evt) + +{ + u32 half = DIV_ROUND_CLOSEST(cycles, 2); + u32 tmcon; + + /* Disable timer 1 */ + tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); + tmcon &= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + /* Both registers need to count down */ + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); + writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); + + /* Re-enable timer1 */ + tmcon |= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + + return 0; } +static struct clock_event_device clockevent_ks8695 = { + .name = "ks8695_t1tc", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .set_next_event = ks8695_set_next_event, + .set_mode = ks8695_set_mode, +}; + /* * IRQ handler for the timer. */ static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) { - timer_tick(); + struct clock_event_device *evt = &clockevent_ks8695; + + evt->event_handler(evt); return IRQ_HANDLED; } @@ -102,18 +128,42 @@ static struct irqaction ks8695_timer_irq = { static void ks8695_timer_setup(void) { - unsigned long tmout = CLOCK_TICK_RATE / HZ; unsigned long tmcon; - /* disable timer1 */ + /* Disable timer 0 and 1 */ tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); - writel_relaxed(tmcon & ~TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON); + tmcon &= TMCON_T0EN; + tmcon &= TMCON_T1EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - writel_relaxed(tmout / 2, KS8695_TMR_VA + KS8695_T1TC); - writel_relaxed(tmout / 2, KS8695_TMR_VA + KS8695_T1PD); + /* + * Set up timer 0 to loop indefinately, count 32 bits with TOUT0 + * set to zero, then 1 bit with TOUT0 set to 1. The reason we are doing + * this is that it's not allowed to set either register to 0, then the + * behaviour is "unpredictable". This injects a faulty pulse every + * 2^32-1 cycles but we can surely live with that rather than + * complicating the code. + */ + writel_relaxed(0xFFFFFFFFU, KS8695_TMR_VA + KS8695_T0TC); + writel_relaxed(1, KS8695_TMR_VA + KS8695_T0PD); + /* Start timer 0 */ + tmcon |= TMCON_T0EN; + writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); + /* Use timer 0 as clocksource */ + if (clocksource_mmio_init((void *) KS8695_TMR_VA + KS8695_T0TC, + "ks8695_t0tc", KS8695_CLOCK_RATE, 300, 32, + clocksource_mmio_readl_up)) + pr_err("timer: failed to initialize KS8695 clock source\n"); - /* re-enable timer1 */ - writel_relaxed(tmcon | TMCON_T1EN, KS8695_TMR_VA + KS8695_TMCON); + /* + * Use timer 1 to fire IRQs on the timeline, only support one-shot + * mode and the system will take care of the rest. Minimum 2 cycles + * (one on each counter) maximum 2*2^32, but the API will only + * accept up to a 32bit full word (0xFFFFFFFFU). + */ + clockevents_config_and_register(&clockevent_ks8695, + KS8695_CLOCK_RATE, 2, + 0xFFFFFFFFU); } static void __init ks8695_timer_init (void) @@ -126,7 +176,6 @@ static void __init ks8695_timer_init (void) struct sys_timer ks8695_timer = { .init = ks8695_timer_init, - .offset = ks8695_gettimeoffset, }; void ks8695_restart(char mode, const char *cmd)