diff mbox

[3/3] ARM: dts: exynos4: Assume status of all optional nodes as disabled

Message ID 1346675674-16034-4-git-send-email-t.figa@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tomasz Figa Sept. 3, 2012, 12:34 p.m. UTC 
Currently all boards must explicitly disable all unused device tree
nodes of unused components (e.g. i2c, sdhci, etc...). This makes it
necessary to all boards to be aware of all components on the SoC, which
in turns makes board dts files longer and more difficult to maintain
(e.g. adding new components to SoC-level tree requires adding nodes with
status="disabled" to every board).

This patch changes "status" of all optional components in SoC-level dts
file to "disabled", adds status="okay" to respective nodes of used
components in dts of all boards and removes all nodes with only
status="disabled" from boards dts.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 arch/arm/boot/dts/exynos4.dtsi            | 22 ++++++++++++
 arch/arm/boot/dts/exynos4210-origen.dts   | 58 ++-----------------------------
 arch/arm/boot/dts/exynos4210-smdkv310.dts | 52 +++------------------------
 3 files changed, 28 insertions(+), 104 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e446fe7..9b71b61 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -48,114 +48,133 @@ 
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
+		status = "disabled";
 	};
 
 	rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
+		status = "disabled";
 	};
 
 	keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
+		status = "disabled";
 	};
 
 	sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
+		status = "disabled";
 	};
 
 	sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
+		status = "disabled";
 	};
 
 	sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
+		status = "disabled";
 	};
 
 	sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
+		status = "disabled";
 	};
 
 	serial@13800000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
+		status = "disabled";
 	};
 
 	serial@13810000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
+		status = "disabled";
 	};
 
 	serial@13820000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
+		status = "disabled";
 	};
 
 	serial@13830000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
+		status = "disabled";
 	};
 
 	i2c@13860000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
+		status = "disabled";
 	};
 
 	i2c@13870000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
+		status = "disabled";
 	};
 
 	i2c@13880000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
+		status = "disabled";
 	};
 
 	i2c@13890000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
+		status = "disabled";
 	};
 
 	i2c@138A0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
+		status = "disabled";
 	};
 
 	i2c@138B0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
+		status = "disabled";
 	};
 
 	i2c@138C0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
+		status = "disabled";
 	};
 
 	i2c@138D0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
+		status = "disabled";
 	};
 
 	spi_0: spi@13920000 {
@@ -166,6 +185,7 @@ 
 		rx-dma-channel = <&pdma0 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	spi_1: spi@13930000 {
@@ -176,6 +196,7 @@ 
 		rx-dma-channel = <&pdma1 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	spi_2: spi@13940000 {
@@ -186,6 +207,7 @@ 
 		rx-dma-channel = <&pdma0 8>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
 	amba {
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0c49caa..d1a1101 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -40,6 +40,7 @@ 
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	sdhci@12510000 {
@@ -53,6 +54,7 @@ 
 			<&gpk0 4 2 3 3>,
 			<&gpk0 5 2 3 3>,
 			<&gpk0 6 2 3 3>;
+		status = "okay";
 	};
 
 	gpio_keys {
@@ -90,60 +92,4 @@ 
 			linux,code = <139>;
 		};
 	};
-
-	keypad@100A0000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13860000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
-	spi_2: spi@13940000 {
-		status = "disabled";
-	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 1beccc8..b87cca2 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -40,6 +40,7 @@ 
 			<&gpk2 4 2 3 3>,
 			<&gpk2 5 2 3 3>,
 			<&gpk2 6 2 3 3>;
+		status = "okay";
 	};
 
 	keypad@100A0000 {
@@ -47,6 +48,7 @@ 
 		samsung,keypad-num-columns = <8>;
 		linux,keypad-no-autorepeat;
 		linux,keypad-wakeup;
+		status = "okay";
 
 		row-gpios = <&gpx2 0 3 3 0>,
 			    <&gpx2 1 3 3 0>;
@@ -128,6 +130,7 @@ 
 		samsung,i2c-max-bus-freq = <20000>;
 		gpios = <&gpd1 0 2 3 0>,
 			<&gpd1 1 2 3 0>;
+		status = "okay";
 
 		eeprom@50 {
 			compatible = "samsung,24ad0xd1";
@@ -140,58 +143,11 @@ 
 		};
 	};
 
-	sdhci@12510000 {
-		status = "disabled";
-	};
-
-	sdhci@12520000 {
-		status = "disabled";
-	};
-
-	sdhci@12540000 {
-		status = "disabled";
-	};
-
-	i2c@13870000 {
-		status = "disabled";
-	};
-
-	i2c@13880000 {
-		status = "disabled";
-	};
-
-	i2c@13890000 {
-		status = "disabled";
-	};
-
-	i2c@138A0000 {
-		status = "disabled";
-	};
-
-	i2c@138B0000 {
-		status = "disabled";
-	};
-
-	i2c@138C0000 {
-		status = "disabled";
-	};
-
-	i2c@138D0000 {
-		status = "disabled";
-	};
-
-	spi_0: spi@13920000 {
-		status = "disabled";
-	};
-
-	spi_1: spi@13930000 {
-		status = "disabled";
-	};
-
 	spi_2: spi@13940000 {
 		gpios = <&gpc1 1 5 3 0>,
 			<&gpc1 3 5 3 0>,
 			<&gpc1 4 5 3 0>;
+		status = "okay";
 
 		w25x80@0 {
 			#address-cells = <1>;