@@ -322,11 +322,12 @@ config ARCH_VERSATILE
config ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family"
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select COMMON_CLK
+ select COMMON_CLK_VERSATILE
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_PATA_PLATFORM
@@ -335,6 +336,7 @@ config ARCH_VEXPRESS
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select VEXPRESS_CONFIG_BUS
help
This enables support for the ARM Ltd Versatile Express boards.
@@ -50,12 +50,6 @@
#define SCPCELLID2 0xFF8
#define SCPCELLID3 0xFFC
-#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15)
-#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15)
-
-#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17)
-#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17)
-
#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2))
static inline void sysctl_soft_reset(void __iomem *base)
@@ -9,6 +9,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/clkdev.h>
+#include <linux/vexpress.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
@@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void)
ca9x4_twd_init();
}
-static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
-{
- u32 site = v2m_get_master_site();
-
- /*
- * Old firmware was using the "site" component of the command
- * to control the DVI muxer (while it should be always 0 ie. MB).
- * Newer firmware uses the data register. Keep both for compatibility.
- */
- v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
- v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
-}
-
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
{
unsigned long framesize = 1024 * 768 * 2;
@@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = {
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
.check = clcdfb_check,
.decode = clcdfb_decode,
- .enable = ct_ca9x4_clcd_enable,
.setup = ct_ca9x4_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
@@ -111,12 +98,23 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&gpio_device,
};
+static const char * const ct_ca9x4_osc1_periphs[] = {
+ "ct:clcd",
+ NULL
+};
-static struct v2m_osc ct_osc1 = {
- .osc = 1,
+static struct vexpress_osc_info ct_ca9x4_osc1_info = {
+ .clock_name = "clcdclk",
.rate_min = 10000000,
.rate_max = 80000000,
- .rate_default = 23750000,
+ .dev_ids = ct_ca9x4_osc1_periphs,
+};
+
+static struct vexpress_config_device ct_ca9x4_osc1_device = {
+ .name = "ct:osc1",
+ .func = VEXPRESS_CONFIG_FUNC_OSC,
+ .addr = { VEXPRESS_SITE_MASTER, 0, 0, 1 },
+ .dev.platform_data = &ct_ca9x4_osc1_info,
};
static struct resource pmu_resources[] = {
@@ -152,7 +150,6 @@ static struct platform_device pmu_device = {
static void __init ct_ca9x4_init(void)
{
int i;
- struct clk *clk;
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
@@ -164,9 +161,7 @@ static void __init ct_ca9x4_init(void)
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
- ct_osc1.site = v2m_get_master_site();
- clk = v2m_osc_register("ct:osc1", &ct_osc1);
- clk_register_clkdev(clk, NULL, "ct:clcd");
+ vexpress_config_device_register(&ct_ca9x4_osc1_device);
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
@@ -1,8 +1,6 @@
#ifndef __MACH_MOTHERBOARD_H
#define __MACH_MOTHERBOARD_H
-#include <linux/clk-provider.h>
-
/*
* Physical addresses, offset from V2M_PA_CS0-3
*/
@@ -41,31 +39,6 @@
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
-/*
- * Offsets from SYSREGS base
- */
-#define V2M_SYS_ID 0x000
-#define V2M_SYS_SW 0x004
-#define V2M_SYS_LED 0x008
-#define V2M_SYS_100HZ 0x024
-#define V2M_SYS_FLAGS 0x030
-#define V2M_SYS_FLAGSSET 0x030
-#define V2M_SYS_FLAGSCLR 0x034
-#define V2M_SYS_NVFLAGS 0x038
-#define V2M_SYS_NVFLAGSSET 0x038
-#define V2M_SYS_NVFLAGSCLR 0x03c
-#define V2M_SYS_MCI 0x048
-#define V2M_SYS_FLASH 0x03c
-#define V2M_SYS_CFGSW 0x058
-#define V2M_SYS_24MHZ 0x05c
-#define V2M_SYS_MISC 0x060
-#define V2M_SYS_DMA 0x064
-#define V2M_SYS_PROCID0 0x084
-#define V2M_SYS_PROCID1 0x088
-#define V2M_SYS_CFGDATA 0x0a0
-#define V2M_SYS_CFGCTRL 0x0a4
-#define V2M_SYS_CFGSTAT 0x0a8
-
/*
* Interrupts. Those in {} are for AMBA devices
@@ -91,43 +64,6 @@
/*
- * Configuration
- */
-#define SYS_CFG_START (1 << 31)
-#define SYS_CFG_WRITE (1 << 30)
-#define SYS_CFG_OSC (1 << 20)
-#define SYS_CFG_VOLT (2 << 20)
-#define SYS_CFG_AMP (3 << 20)
-#define SYS_CFG_TEMP (4 << 20)
-#define SYS_CFG_RESET (5 << 20)
-#define SYS_CFG_SCC (6 << 20)
-#define SYS_CFG_MUXFPGA (7 << 20)
-#define SYS_CFG_SHUTDOWN (8 << 20)
-#define SYS_CFG_REBOOT (9 << 20)
-#define SYS_CFG_DVIMODE (11 << 20)
-#define SYS_CFG_POWER (12 << 20)
-#define SYS_CFG_SITE(n) ((n) << 16)
-#define SYS_CFG_SITE_MB 0
-#define SYS_CFG_SITE_DB1 1
-#define SYS_CFG_SITE_DB2 2
-#define SYS_CFG_STACK(n) ((n) << 12)
-
-#define SYS_CFG_ERR (1 << 1)
-#define SYS_CFG_COMPLETE (1 << 0)
-
-int v2m_cfg_write(u32 devfn, u32 data);
-int v2m_cfg_read(u32 devfn, u32 *data);
-void v2m_flags_set(u32 data);
-
-/*
- * Miscellaneous
- */
-#define SYS_MISC_MASTERSITE (1 << 14)
-#define SYS_PROCIDx_HBI_MASK 0xfff
-
-int v2m_get_master_site(void);
-
-/*
* Core tile IDs
*/
#define V2M_CT_ID_CA9 0x0c000191
@@ -149,21 +85,4 @@ struct ct_desc {
extern struct ct_desc *ct_desc;
-/*
- * OSC clock provider
- */
-struct v2m_osc {
- struct clk_hw hw;
- u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */
- u8 stack; /* board stack position */
- u16 osc;
- unsigned long rate_min;
- unsigned long rate_max;
- unsigned long rate_default;
-};
-
-#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw)
-
-struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc);
-
#endif
@@ -13,6 +13,7 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/of_fdt.h>
+#include <linux/vexpress.h>
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
@@ -193,5 +194,5 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- v2m_flags_set(virt_to_phys(versatile_secondary_startup));
+ vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
}
@@ -15,11 +15,10 @@
#include <linux/smsc911x.h>
#include <linux/spinlock.h>
#include <linux/usb/isp1760.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
+#include <linux/vexpress.h>
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
@@ -32,7 +31,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/timer-sp.h>
-#include <asm/hardware/sp810.h>
#include <mach/ct-ca9x4.h>
#include <mach/motherboard.h>
@@ -56,22 +54,6 @@ static struct map_desc v2m_io_desc[] __initdata = {
},
};
-static void __iomem *v2m_sysreg_base;
-
-static void __init v2m_sysctl_init(void __iomem *base)
-{
- u32 scctrl;
-
- if (WARN_ON(!base))
- return;
-
- /* Select 1MHz TIMCLK as the reference clock for SP804 timers */
- scctrl = readl(base + SCCTRL);
- scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
- scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
- writel(scctrl, base + SCCTRL);
-}
-
static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
{
if (WARN_ON(!base || irq == NO_IRQ))
@@ -85,69 +67,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
}
-static DEFINE_SPINLOCK(v2m_cfg_lock);
-
-int v2m_cfg_write(u32 devfn, u32 data)
-{
- /* Configuration interface broken? */
- u32 val;
-
- printk("%s: writing %08x to %08x\n", __func__, data, devfn);
-
- devfn |= SYS_CFG_START | SYS_CFG_WRITE;
-
- spin_lock(&v2m_cfg_lock);
- val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
- writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT);
-
- writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA);
- writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
-
- do {
- val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
- } while (val == 0);
- spin_unlock(&v2m_cfg_lock);
-
- return !!(val & SYS_CFG_ERR);
-}
-
-int v2m_cfg_read(u32 devfn, u32 *data)
-{
- u32 val;
-
- devfn |= SYS_CFG_START;
-
- spin_lock(&v2m_cfg_lock);
- writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT);
- writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
-
- mb();
-
- do {
- cpu_relax();
- val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
- } while (val == 0);
-
- *data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA);
- spin_unlock(&v2m_cfg_lock);
-
- return !!(val & SYS_CFG_ERR);
-}
-
-void __init v2m_flags_set(u32 data)
-{
- writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR);
- writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
-}
-
-int v2m_get_master_site(void)
-{
- u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
-
- return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1;
-}
-
-
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
.end = V2M_SERIAL_BUS_PCI + SZ_4K - 1,
@@ -235,14 +154,8 @@ static struct platform_device v2m_usb_device = {
.dev.platform_data = &v2m_usb_config,
};
-static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
-{
- writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH);
-}
-
static struct physmap_flash_data v2m_flash_data = {
.width = 4,
- .set_vpp = v2m_flash_set_vpp,
};
static struct resource v2m_flash_resources[] = {
@@ -289,14 +202,49 @@ static struct platform_device v2m_cf_device = {
.dev.platform_data = &v2m_pata_data,
};
-static unsigned int v2m_mmci_status(struct device *dev)
-{
- return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0);
-}
-
static struct mmci_platform_data v2m_mmci_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .status = v2m_mmci_status,
+ .gpio_wp = VEXPRESS_GPIO_MMC_WPROT,
+ .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN,
+};
+
+static struct resource v2m_sysreg_resources[] = {
+ {
+ .start = V2M_SYSREGS,
+ .end = V2M_SYSREGS + 0xfff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device v2m_sysreg_device = {
+ .name = "vexpress-sysreg",
+ .id = -1,
+ .resource = v2m_sysreg_resources,
+ .num_resources = ARRAY_SIZE(v2m_sysreg_resources),
+};
+
+static struct vexpress_config_device v2m_muxfpga_device = {
+ .name = "mb:muxfpga",
+ .func = VEXPRESS_CONFIG_FUNC_MUXFPGA,
+ .addr = { VEXPRESS_SITE_MB, 0, 0, 0 },
+};
+
+static struct vexpress_config_device v2m_shutdown_device = {
+ .name = "mb:shutdown",
+ .func = VEXPRESS_CONFIG_FUNC_SHUTDOWN,
+ .addr = { VEXPRESS_SITE_MB, 0, 0, 0 },
+};
+
+static struct vexpress_config_device v2m_reboot_device = {
+ .name = "mb:reboot",
+ .func = VEXPRESS_CONFIG_FUNC_REBOOT,
+ .addr = { VEXPRESS_SITE_MB, 0, 0, 0 },
+};
+
+static struct vexpress_config_device v2m_dvimode_device = {
+ .name = "mb:dvimode",
+ .func = VEXPRESS_CONFIG_FUNC_DVIMODE,
+ .addr = { VEXPRESS_SITE_MB, 0, 0, 0 },
};
static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
@@ -323,123 +271,9 @@ static struct amba_device *v2m_amba_devs[] __initdata = {
&rtc_device,
};
-
-static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct v2m_osc *osc = to_v2m_osc(hw);
-
- return !parent_rate ? osc->rate_default : parent_rate;
-}
-
-static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *parent_rate)
-{
- struct v2m_osc *osc = to_v2m_osc(hw);
-
- if (WARN_ON(rate < osc->rate_min))
- rate = osc->rate_min;
-
- if (WARN_ON(rate > osc->rate_max))
- rate = osc->rate_max;
-
- return rate;
-}
-
-static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
-{
- struct v2m_osc *osc = to_v2m_osc(hw);
-
- v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) |
- SYS_CFG_STACK(osc->stack) | osc->osc, rate);
-
- return 0;
-}
-
-static struct clk_ops v2m_osc_ops = {
- .recalc_rate = v2m_osc_recalc_rate,
- .round_rate = v2m_osc_round_rate,
- .set_rate = v2m_osc_set_rate,
-};
-
-struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc)
-{
- struct clk_init_data init;
-
- WARN_ON(osc->site > 2);
- WARN_ON(osc->stack > 15);
- WARN_ON(osc->osc > 4095);
-
- init.name = name;
- init.ops = &v2m_osc_ops;
- init.flags = CLK_IS_ROOT;
- init.num_parents = 0;
-
- osc->hw.init = &init;
-
- return clk_register(NULL, &osc->hw);
-}
-
-static struct v2m_osc v2m_mb_osc1 = {
- .site = SYS_CFG_SITE_MB,
- .osc = 1,
- .rate_min = 23750000,
- .rate_max = 63500000,
- .rate_default = 23750000,
-};
-
-static const char *v2m_ref_clk_periphs[] __initconst = {
- "mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */
-};
-
-static const char *v2m_osc1_periphs[] __initconst = {
- "mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */
-};
-
-static const char *v2m_osc2_periphs[] __initconst = {
- "mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */
- "mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */
- "mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */
- "mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */
- "mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */
- "mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */
- "mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */
-};
-
-static void __init v2m_clk_init(void)
-{
- struct clk *clk;
- int i;
-
- clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
- CLK_IS_ROOT, 0);
- WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
-
- clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL,
- CLK_IS_ROOT, 32768);
- for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++)
- WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i]));
-
- clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL,
- CLK_IS_ROOT, 1000000);
- WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804"));
- WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804"));
-
- clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1);
- for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++)
- WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i]));
-
- clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL,
- CLK_IS_ROOT, 24000000);
- for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++)
- WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i]));
-}
-
static void __init v2m_timer_init(void)
{
- v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
- v2m_clk_init();
+ vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K));
v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
@@ -451,19 +285,7 @@ static void __init v2m_init_early(void)
{
if (ct_desc->init_early)
ct_desc->init_early();
- versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
-}
-
-static void v2m_power_off(void)
-{
- if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
- printk(KERN_EMERG "Unable to shutdown\n");
-}
-
-static void v2m_restart(char str, const char *cmd)
-{
- if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
- printk(KERN_EMERG "Unable to reboot\n");
+ versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
struct ct_desc *ct_desc;
@@ -480,7 +302,7 @@ static void __init v2m_populate_ct_desc(void)
u32 current_tile_id;
ct_desc = NULL;
- current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0)
+ current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER)
& V2M_CT_ID_MASK;
for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
@@ -496,7 +318,7 @@ static void __init v2m_populate_ct_desc(void)
static void __init v2m_map_io(void)
{
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
- v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K);
+ vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K));
v2m_populate_ct_desc();
ct_desc->map_io();
}
@@ -513,6 +335,12 @@ static void __init v2m_init(void)
regulator_register_fixed(0, v2m_eth_supplies,
ARRAY_SIZE(v2m_eth_supplies));
+ vexpress_config_device_register(&v2m_muxfpga_device);
+ vexpress_config_device_register(&v2m_shutdown_device);
+ vexpress_config_device_register(&v2m_reboot_device);
+ vexpress_config_device_register(&v2m_dvimode_device);
+
+ platform_device_register(&v2m_sysreg_device);
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
@@ -523,7 +351,7 @@ static void __init v2m_init(void)
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
- pm_power_off = v2m_power_off;
+ pm_power_off = vexpress_power_off;
ct_desc->init_tile();
}
@@ -536,7 +364,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.timer = &v2m_timer,
.handle_irq = gic_handle_irq,
.init_machine = v2m_init,
- .restart = v2m_restart,
+ .restart = vexpress_restart,
MACHINE_END
#if defined(CONFIG_ARCH_VEXPRESS_DT)
@@ -579,20 +407,13 @@ void __init v2m_dt_map_io(void)
void __init v2m_dt_init_early(void)
{
- struct device_node *node;
u32 dt_hbi;
- node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
- v2m_sysreg_base = of_iomap(node, 0);
- if (WARN_ON(!v2m_sysreg_base))
- return;
+ vexpress_sysreg_of_early_init();
/* Confirm board type against DT property, if available */
if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
- int site = v2m_get_master_site();
- u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
- V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
- u32 hbi = id & SYS_PROCIDx_HBI_MASK;
+ u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
if (WARN_ON(dt_hbi != hbi))
pr_warning("vexpress: DT HBI (%x) is not matching "
@@ -608,6 +429,7 @@ static struct of_device_id vexpress_irq_match[] __initdata = {
static void __init v2m_dt_init_irq(void)
{
of_irq_init(vexpress_irq_match);
+ vexpress_config_of_populate();
}
static void __init v2m_dt_timer_init(void)
@@ -616,47 +438,34 @@ static void __init v2m_dt_timer_init(void)
const char *path;
int err;
- node = of_find_compatible_node(NULL, NULL, "arm,sp810");
- v2m_sysctl_init(of_iomap(node, 0));
-
- v2m_clk_init();
+ vexpress_clk_of_init();
err = of_property_read_string(of_aliases, "arm,v2m_timer", &path);
if (WARN_ON(err))
return;
node = of_find_node_by_path(path);
v2m_sp804_init(of_iomap(node, 0), irq_of_parse_and_map(node, 0));
+
if (arch_timer_of_register() != 0)
twd_local_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
- versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
+ versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
+ 24000000);
}
static struct sys_timer v2m_dt_timer = {
.init = v2m_dt_timer_init,
};
-static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash",
- &v2m_flash_data),
- OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data),
- /* RS1 memory map */
- OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash",
- &v2m_flash_data),
- OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data),
- {}
-};
-
static void __init v2m_dt_init(void)
{
l2x0_of_init(0x00400000, 0xfe0fffff);
- of_platform_populate(NULL, of_default_bus_match_table,
- v2m_dt_auxdata_lookup, NULL);
- pm_power_off = v2m_power_off;
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ pm_power_off = vexpress_power_off;
}
-const static char *v2m_dt_match[] __initconst = {
+static const char * const v2m_dt_match[] __initconst = {
"arm,vexpress",
NULL,
};
@@ -669,7 +478,7 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.timer = &v2m_dt_timer,
.init_machine = v2m_dt_init,
.handle_irq = gic_handle_irq,
- .restart = v2m_restart,
+ .restart = vexpress_restart,
MACHINE_END
#endif
This patch starts using all the configuration infrastructure. - generic GPIO library is forced now - sysreg GPIOs are used to as MMC CD and WP information sources; thanks to this MMCI auxiliary data is not longer necessary - DVI muxer and mode control is removed from non-DT V2P-CA9 code as this is now handled by the vexpress-display driver - oscillator control is removed as is being handled by the common clock driver now - the sysreg and sysctl control is now delegated to the appropriate drivers and all related code was removed - NOR Flash set_vpp function has been removed as the control bit used does _not_ control its VPP line, but the #WP signal instead (which is de facto unusable in case of Linux MTD drivers); this also allowed the remove its DT auxiliary data The non-DT code defines only minimal required number of the config devices. Device Trees are updated to make use of all new features. Signed-off-by: Pawel Moll <pawel.moll@arm.com> --- arch/arm/Kconfig | 4 +- arch/arm/include/asm/hardware/sp810.h | 6 - arch/arm/mach-vexpress/ct-ca9x4.c | 37 +-- arch/arm/mach-vexpress/include/mach/motherboard.h | 81 ------ arch/arm/mach-vexpress/platsmp.c | 3 +- arch/arm/mach-vexpress/v2m.c | 321 +++++---------------- 6 files changed, 86 insertions(+), 366 deletions(-)