new file mode 100644
@@ -0,0 +1,31 @@
+* ARM Versatile FPGA interrupt controller
+
+One or more FPGA IRQ controllers can be synthesized in an ARM reference board
+such as the Integrator or Versatile family. The output of these different
+controllers are OR:ed together and fed to the CPU tile's IRQ input. Each
+instance can handle up to 32 interrupts.
+
+Required properties:
+- compatible: "arm,versatile-fpga-irq"
+- interrupt-controller: Identifies the node as an interrupt controller
+- #interrupt-cells: The number of cells to define the interrupts. Must be 1
+ as the FPGA IRQ controller has no configuration options for interrupt
+ sources. The cell is a u32 and defines the interrupt number.
+- reg: The register bank for the FPGA interrupt controller.
+- clear-mask: a u32 number representing the mask written to clear all IRQs
+ on the controller at boot for example.
+- valid-mask: a u32 number representing a bit mask determining which of
+ the interrupts are valid. Unconnected/unused lines are set to 0, and
+ the system till not make it possible for devices to request these
+ interrupts.
+
+Example:
+
+pic: pic@14000000 {
+ compatible = "arm,versatile-fpga-irq";
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ reg = <0x14000000 0x100>;
+ clear-mask = <0xffffffff>;
+ valid-mask = <0x003fffff>;
+};
@@ -5,6 +5,8 @@
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
@@ -14,11 +16,17 @@
#define IRQ_RAW_STATUS 0x04
#define IRQ_ENABLE_SET 0x08
#define IRQ_ENABLE_CLEAR 0x0c
+#define INT_SOFT_SET 0x10
+#define INT_SOFT_CLEAR 0x14
+#define FIQ_STATUS 0x20
+#define FIQ_RAW_STATUS 0x24
+#define FIQ_ENABLE 0x28
+#define FIQ_ENABLE_SET 0x28
+#define FIQ_ENABLE_CLEAR 0x2C
/**
* struct fpga_irq_data - irq data container for the FPGA IRQ controller
* @base: memory offset in virtual memory
- * @irq_start: first IRQ number handled by this instance
* @chip: chip container for this instance
* @domain: IRQ domain for this instance
* @valid: mask for valid IRQs on this controller
@@ -26,7 +34,6 @@
*/
struct fpga_irq_data {
void __iomem *base;
- unsigned int irq_start;
struct irq_chip chip;
u32 valid;
struct irq_domain *domain;
@@ -125,34 +132,79 @@ static struct irq_domain_ops fpga_irqdomain_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
-void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
- int parent_irq, u32 valid, struct device_node *node)
-{
+static __init struct fpga_irq_data *
+fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) {
struct fpga_irq_data *f;
if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) {
printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__);
- return;
+ return NULL;
}
-
f = &fpga_irq_devices[fpga_irq_id];
f->base = base;
- f->irq_start = irq_start;
f->chip.name = name;
f->chip.irq_ack = fpga_irq_mask;
f->chip.irq_mask = fpga_irq_mask;
f->chip.irq_unmask = fpga_irq_unmask;
f->valid = valid;
+ fpga_irq_id++;
+
+ return f;
+}
+
+void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start,
+ int parent_irq, u32 valid, struct device_node *node)
+{
+ struct fpga_irq_data *f;
+
+ f = fpga_irq_prep_struct(base, name, valid);
+ if (!f)
+ return;
if (parent_irq != -1) {
irq_set_handler_data(parent_irq, f);
irq_set_chained_handler(parent_irq, fpga_irq_handle);
}
- f->domain = irq_domain_add_legacy(node, fls(valid), f->irq_start, 0,
+ f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0,
&fpga_irqdomain_ops, f);
pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
fpga_irq_id, name, base, f->used_irqs);
+}
- fpga_irq_id++;
+#ifdef CONFIG_OF
+int __init fpga_irq_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct fpga_irq_data *f;
+ void __iomem *base;
+ u32 clear_mask;
+ u32 valid_mask;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ base = of_iomap(node, 0);
+ WARN(!base, "unable to map fpga irq registers\n");
+
+ if (of_property_read_u32(node, "clear-mask", &clear_mask))
+ clear_mask = 0;
+
+ if (of_property_read_u32(node, "valid-mask", &valid_mask))
+ valid_mask = 0;
+
+ f = fpga_irq_prep_struct(base, node->name, valid_mask);
+ if (!f)
+ return -ENOMEM;
+
+ writel(clear_mask, base + IRQ_ENABLE_CLEAR);
+ writel(clear_mask, base + FIQ_ENABLE_CLEAR);
+
+ f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f);
+ f->used_irqs = hweight32(valid_mask);
+
+ pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n",
+ fpga_irq_id, node->name, base, f->used_irqs);
+ return 0;
}
+#endif
@@ -7,5 +7,7 @@ struct pt_regs;
void fpga_handle_irq(struct pt_regs *regs);
void fpga_irq_init(void __iomem *, const char *, int, int, u32,
struct device_node *node);
+int fpga_irq_of_init(struct device_node *node,
+ struct device_node *parent);
#endif
This adds Device Tree probing support to the Versatile FPGA IRQ controller. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Refactor a bit so we register a linear IRQdomain for the DT case. ChangeLog v1->v2: - Stop passing the Linux IRQ number in the DT node, bad idea. Register descriptors dynamically, and use whatever IRQ number base we get. Assume we will switch everything using this over to DT and live with it. --- .../devicetree/bindings/arm/versatile-fpga-irq.txt | 31 ++++++++++ arch/arm/plat-versatile/fpga-irq.c | 72 +++++++++++++++++++--- arch/arm/plat-versatile/include/plat/fpga-irq.h | 2 + 3 files changed, 95 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt