diff mbox

[v3,03/14] MFD: twl4030-audio: Rearange and clean-up the probe function

Message ID 1346933541-21547-4-git-send-email-peter.ujfalusi@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Ujfalusi Sept. 6, 2012, 12:12 p.m. UTC 
To facilitate the device tree support the probe function need to be rearanged.
Small cleanup in the APLL frequency selection part as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
 drivers/mfd/twl4030-audio.c | 34 ++++++++++++++++------------------
 1 file changed, 16 insertions(+), 18 deletions(-)
diff mbox

Patch

diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c
index efa2d42..ca2d669 100644
--- a/drivers/mfd/twl4030-audio.c
+++ b/drivers/mfd/twl4030-audio.c
@@ -169,35 +169,30 @@  static int __devinit twl4030_audio_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	audio = devm_kzalloc(&pdev->dev, sizeof(struct twl4030_audio),
+			     GFP_KERNEL);
+	if (!audio)
+		return -ENOMEM;
+
+	mutex_init(&audio->mutex);
+	audio->audio_mclk = pdata->audio_mclk;
+
 	/* Configure APLL_INFREQ and disable APLL if enabled */
-	val = 0;
-	switch (pdata->audio_mclk) {
+	switch (audio->audio_mclk) {
 	case 19200000:
-		val |= TWL4030_APLL_INFREQ_19200KHZ;
+		val = TWL4030_APLL_INFREQ_19200KHZ;
 		break;
 	case 26000000:
-		val |= TWL4030_APLL_INFREQ_26000KHZ;
+		val = TWL4030_APLL_INFREQ_26000KHZ;
 		break;
 	case 38400000:
-		val |= TWL4030_APLL_INFREQ_38400KHZ;
+		val = TWL4030_APLL_INFREQ_38400KHZ;
 		break;
 	default:
 		dev_err(&pdev->dev, "Invalid audio_mclk\n");
 		return -EINVAL;
 	}
-	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE,
-					val, TWL4030_REG_APLL_CTL);
-
-	audio = devm_kzalloc(&pdev->dev, sizeof(struct twl4030_audio),
-			     GFP_KERNEL);
-	if (!audio)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, audio);
-
-	twl4030_audio_dev = pdev;
-	mutex_init(&audio->mutex);
-	audio->audio_mclk = pdata->audio_mclk;
+	twl_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, val, TWL4030_REG_APLL_CTL);
 
 	/* Codec power */
 	audio->resource[TWL4030_AUDIO_RES_POWER].reg = TWL4030_REG_CODEC_MODE;
@@ -222,6 +217,9 @@  static int __devinit twl4030_audio_probe(struct platform_device *pdev)
 		childs++;
 	}
 
+	platform_set_drvdata(pdev, audio);
+	twl4030_audio_dev = pdev;
+
 	if (childs)
 		ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells,
 				      childs, NULL, 0);