@@ -66,6 +66,8 @@
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
@@ -54,6 +54,8 @@
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include "sh-gpio.h"
+
/*
* CON1 Camera Module
* CON2 Extension Bus
@@ -42,6 +42,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include "sh-gpio.h"
+
/*
* SDHI
*
@@ -64,6 +64,8 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include "sh-gpio.h"
+
/*
* Address Interface BusWidth note
* ------------------------------------------------------------------
@@ -1,62 +1 @@
-/*
- * Generic GPIO API and pinmux table support
- *
- * Copyright (c) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sh_pfc.h>
-#include <linux/io.h>
-
-#ifdef CONFIG_GPIOLIB
-
-static inline int irq_to_gpio(unsigned int irq)
-{
- return -ENOSYS;
-}
-
-#else
-
-#define __ARM_GPIOLIB_COMPLEX
-
-#endif /* CONFIG_GPIOLIB */
-
-/*
- * FIXME !!
- *
- * current gpio frame work doesn't have
- * the method to control only pull up/down/free.
- * this function should be replaced by correct gpio function
- */
-static inline void __init gpio_direction_none(u32 addr)
-{
- __raw_writeb(0x00, addr);
-}
-
-static inline void __init gpio_request_pullup(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xC0;
- __raw_writeb(data, addr);
-}
-
-static inline void __init gpio_request_pulldown(u32 addr)
-{
- u8 data = __raw_readb(addr);
-
- data &= 0x0F;
- data |= 0xA0;
-
- __raw_writeb(data, addr);
-}
-
-#endif /* __ASM_ARCH_GPIO_H */
+/* empty */
@@ -20,7 +20,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/r8a7740.h>
#include <mach/irqs.h>
@@ -19,7 +19,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <linux/ioport.h>
#include <mach/r8a7779.h>
@@ -18,7 +18,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7367.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -22,7 +22,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/irqs.h>
#include <mach/sh7372.h>
@@ -19,7 +19,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh7377.h>
#define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -20,7 +20,7 @@
*/
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/sh_pfc.h>
#include <mach/sh73a0.h>
#include <mach/irqs.h>
new file mode 100644
@@ -0,0 +1,48 @@
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+/*
+ * FIXME !!
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static inline void __init gpio_direction_none(u32 addr)
+{
+ __raw_writeb(0x00, addr);
+}
+
+static inline void __init gpio_request_pullup(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xC0;
+ __raw_writeb(data, addr);
+}
+
+static inline void __init gpio_request_pulldown(u32 addr)
+{
+ u8 data = __raw_readb(addr);
+
+ data &= 0x0F;
+ data |= 0xA0;
+
+ __raw_writeb(data, addr);
+}
+
+#endif /* __ASM_ARCH_GPIO_H */
@@ -17,6 +17,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/sh_pfc.h>
struct sh_pfc_chip {
struct sh_pfc *pfc;