@@ -41,7 +41,7 @@
static struct __initdata orion_addr_map_cfg addr_map_cfg = {
.num_wins = 8,
.remappable_wins = 4,
- .bridge_virt_base = BRIDGE_VIRT_BASE,
+ .bridge_virt_base = (unsigned long) BRIDGE_VIRT_BASE,
};
static const struct __initdata orion_addr_map_info addr_map_info[] = {
@@ -42,17 +42,17 @@
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
- .virtual = KIRKWOOD_PCIE_IO_VIRT_BASE,
+ .virtual = (unsigned long) KIRKWOOD_PCIE_IO_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
.length = KIRKWOOD_PCIE_IO_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
+ .virtual = (unsigned long) KIRKWOOD_PCIE1_IO_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
.length = KIRKWOOD_PCIE1_IO_SIZE,
.type = MT_DEVICE,
}, {
- .virtual = KIRKWOOD_REGS_VIRT_BASE,
+ .virtual = (unsigned long) KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
.type = MT_DEVICE,
@@ -215,8 +215,7 @@ static struct clk *tclk;
static struct clk __init *kirkwood_register_gate(const char *name, u8 bit_idx)
{
- return clk_register_gate(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock);
}
@@ -225,8 +224,7 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
void (*fn_en)(void),
void (*fn_dis)(void))
{
- return clk_register_gate_fn(NULL, name, "tclk", 0,
- (void __iomem *)CLOCK_GATING_CTRL,
+ return clk_register_gate_fn(NULL, name, "tclk", 0, CLOCK_GATING_CTRL,
bit_idx, 0, &gating_lock, fn_en, fn_dis);
}
@@ -458,7 +456,8 @@ void __init kirkwood_i2c_init(void)
void __init kirkwood_uart0_init(void)
{
- orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
+ orion_uart0_init((unsigned long) UART0_VIRT_BASE,
+ UART0_PHYS_BASE,
IRQ_KIRKWOOD_UART_0, tclk);
}
@@ -468,7 +467,8 @@ void __init kirkwood_uart0_init(void)
****************************************************************************/
void __init kirkwood_uart1_init(void)
{
- orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
+ orion_uart1_init((unsigned long) UART1_VIRT_BASE,
+ UART1_PHYS_BASE,
IRQ_KIRKWOOD_UART_1, tclk);
}
@@ -516,7 +516,7 @@ void __init kirkwood_wdt_init(void)
****************************************************************************/
void __init kirkwood_init_early(void)
{
- orion_time_set_base(TIMER_VIRT_BASE);
+ orion_time_set_base((unsigned long) TIMER_VIRT_BASE);
/*
* Some Kirkwood devices allocate their coherent buffers from atomic
@@ -545,7 +545,8 @@ static void __init kirkwood_timer_init(void)
{
kirkwood_tclk = kirkwood_find_tclk();
- orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+ orion_time_init((unsigned long) BRIDGE_VIRT_BASE,
+ BRIDGE_INT_TIMER1_CLR,
IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
@@ -37,17 +37,17 @@
#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE1_IO_PHYS_BASE 0xf3000000
-#define KIRKWOOD_PCIE1_IO_VIRT_BASE 0xfef00000
+#define KIRKWOOD_PCIE1_IO_VIRT_BASE IOMEM(0xfef00000)
#define KIRKWOOD_PCIE1_IO_BUS_BASE 0x00100000
#define KIRKWOOD_PCIE1_IO_SIZE SZ_1M
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
-#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfee00000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE IOMEM(0xfee00000)
#define KIRKWOOD_PCIE_IO_BUS_BASE 0x00000000
#define KIRKWOOD_PCIE_IO_SIZE SZ_1M
#define KIRKWOOD_REGS_PHYS_BASE 0xf1000000
-#define KIRKWOOD_REGS_VIRT_BASE 0xfed00000
+#define KIRKWOOD_REGS_VIRT_BASE IOMEM(0xfed00000)
#define KIRKWOOD_REGS_SIZE SZ_1M
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
@@ -10,6 +10,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/irq.h>
+#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
@@ -29,14 +30,14 @@ static int __initdata gpio1_irqs[4] = {
void __init kirkwood_init_irq(void)
{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
- orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+ orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+ orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
/*
* Initialize gpiolib for GPIOs 0-49.
*/
- orion_gpio_init(NULL, 0, 32, (void __iomem *)GPIO_LOW_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 0, 32, GPIO_LOW_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START, gpio0_irqs);
- orion_gpio_init(NULL, 32, 18, (void __iomem *)GPIO_HIGH_VIRT_BASE, 0,
+ orion_gpio_init(NULL, 32, 18, GPIO_HIGH_VIRT_BASE, 0,
IRQ_KIRKWOOD_GPIO_START + 32, gpio1_irqs);
}
@@ -38,5 +38,6 @@ static unsigned int __init kirkwood_variant(void)
void __init kirkwood_mpp_conf(unsigned int *mpp_list)
{
orion_mpp_conf(mpp_list, kirkwood_variant(),
- MPP_MAX, DEV_BUS_VIRT_BASE);
+ MPP_MAX,
+ (unsigned long) DEV_BUS_VIRT_BASE);
}
@@ -47,8 +47,8 @@ void kirkwood_enable_pcie(void)
void kirkwood_pcie_id(u32 *dev, u32 *rev)
{
kirkwood_enable_pcie();
- *dev = orion_pcie_dev_id((void __iomem *)PCIE_VIRT_BASE);
- *rev = orion_pcie_rev((void __iomem *)PCIE_VIRT_BASE);
+ *dev = orion_pcie_dev_id(PCIE_VIRT_BASE);
+ *rev = orion_pcie_rev(PCIE_VIRT_BASE);
}
struct pcie_port {
@@ -133,7 +133,7 @@ static struct pci_ops pcie_ops = {
static void __init pcie0_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE_VIRT_BASE;
+ pp->base = PCIE_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE;
/*
@@ -155,7 +155,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
static void __init pcie1_ioresources_init(struct pcie_port *pp)
{
- pp->base = (void __iomem *)PCIE1_VIRT_BASE;
+ pp->base = PCIE1_VIRT_BASE;
pp->irq = IRQ_KIRKWOOD_PCIE1;
/*
@@ -273,11 +273,11 @@ static struct hw_pci kirkwood_pci __initdata = {
.map_irq = kirkwood_pcie_map_irq,
};
-static void __init add_pcie_port(int index, unsigned long base)
+static void __init add_pcie_port(int index, void __iomem *base)
{
printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
- if (orion_pcie_link_up((void __iomem *)base)) {
+ if (orion_pcie_link_up(base)) {
printk(KERN_INFO "link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
@@ -20,6 +20,7 @@
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
+#include <linux/io.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
@@ -161,7 +162,7 @@ static int __init ts41x_pci_init(void)
* (Marvell 88sx7042/sata_mv) is known to stop working
* after a few minutes.
*/
- orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+ orion_pcie_reset(PCIE_VIRT_BASE);
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
We now define all virtual base address constants using IOMEM() so that those are naturally typed as void __iomem pointers, and we do the necessary adjustements in the mach-kirkwood code. Note that we introduce a few temporary additional "unsigned long" casts when calling into plat-orion functions. Those are removed by followup patches converting plat-orion functions to void __iomem pointers as well. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- arch/arm/mach-kirkwood/addr-map.c | 2 +- arch/arm/mach-kirkwood/common.c | 23 ++++++++++++----------- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 6 +++--- arch/arm/mach-kirkwood/irq.c | 9 +++++---- arch/arm/mach-kirkwood/mpp.c | 3 ++- arch/arm/mach-kirkwood/pcie.c | 12 ++++++------ arch/arm/mach-kirkwood/ts41x-setup.c | 3 ++- 7 files changed, 31 insertions(+), 27 deletions(-)