| Message ID | 1347447496-16793-19-git-send-email-shubhrajyoti@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 5d4bad4..498a462 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -946,7 +946,6 @@ omap_i2c_isr(int this_irq, void *dev_id) num_bytes = dev->buf_len; ret = omap_i2c_transmit_data(dev, num_bytes, true); - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); if (ret < 0) goto out; @@ -962,7 +961,6 @@ omap_i2c_isr(int this_irq, void *dev_id) num_bytes = dev->threshold; ret = omap_i2c_transmit_data(dev, num_bytes, false); - stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); if (ret < 0) goto out;
Currently omap_i2c_ack_stat doesn't use the stat variable. After the read of the I2C_STAT_REG it is not used. Remove the redundant read of the status register. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> --- drivers/i2c/busses/i2c-omap.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-)