@@ -64,7 +64,6 @@ struct omap_dmic {
static struct omap_pcm_dma_data omap_dmic_dai_dma_params = {
.name = "DMIC capture",
.data_type = OMAP_DMA_DATA_TYPE_S32,
- .sync_mode = OMAP_DMA_SYNC_PACKET,
};
static inline void omap_dmic_write(struct omap_dmic *dmic, u16 reg, u32 val)
@@ -290,7 +290,6 @@ static __devinit int omap_hdmi_probe(struct platform_device *pdev)
hdmi_data->dma_params.dma_req = hdmi_rsrc->start;
hdmi_data->dma_params.name = "HDMI playback";
- hdmi_data->dma_params.sync_mode = OMAP_DMA_SYNC_PACKET;
/*
* TODO: We assume that there is only one DSS HDMI device. Future
@@ -225,7 +225,7 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
struct omap_mcbsp *mcbsp = snd_soc_dai_get_drvdata(cpu_dai);
struct omap_mcbsp_reg_cfg *regs = &mcbsp->cfg_regs;
struct omap_pcm_dma_data *dma_data;
- int wlen, channels, wpf, sync_mode = OMAP_DMA_SYNC_ELEMENT;
+ int wlen, channels, wpf;
int pkt_size = 0;
unsigned int format, div, framesize, master;
@@ -272,15 +272,12 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream,
return -EINVAL;
pkt_size = period_words / divider;
- sync_mode = OMAP_DMA_SYNC_PACKET;
} else if (channels > 1) {
/* Use packet mode for non mono streams */
pkt_size = channels;
- sync_mode = OMAP_DMA_SYNC_PACKET;
}
}
- dma_data->sync_mode = sync_mode;
dma_data->packet_size = pkt_size;
snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
@@ -73,14 +73,12 @@ static struct omap_pcm_dma_data omap_mcpdm_dai_dma_params[] = {
.name = "Audio playback",
.dma_req = OMAP44XX_DMA_MCPDM_DL,
.data_type = OMAP_DMA_DATA_TYPE_S32,
- .sync_mode = OMAP_DMA_SYNC_PACKET,
.port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_REG_DN_DATA,
},
{
.name = "Audio capture",
.dma_req = OMAP44XX_DMA_MCPDM_UP,
.data_type = OMAP_DMA_DATA_TYPE_S32,
- .sync_mode = OMAP_DMA_SYNC_PACKET,
.port_addr = OMAP44XX_MCPDM_L3_BASE + MCPDM_REG_UP_DATA,
},
};
@@ -33,7 +33,6 @@ struct omap_pcm_dma_data {
unsigned long port_addr; /* transmit/receive register */
void (*set_threshold)(struct snd_pcm_substream *substream);
int data_type; /* data type 8,16,32 */
- int sync_mode; /* DMA sync mode */
int packet_size; /* packet size only in PACKET mode */
};
The omap-pcm platform driver no longer needs this parameter to select between ELEMENT and PACKET mode. The selection is based on the configured packet_size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- sound/soc/omap/omap-dmic.c | 1 - sound/soc/omap/omap-hdmi.c | 1 - sound/soc/omap/omap-mcbsp.c | 5 +---- sound/soc/omap/omap-mcpdm.c | 2 -- sound/soc/omap/omap-pcm.h | 1 - 5 files changed, 1 insertion(+), 9 deletions(-)