@@ -268,6 +268,7 @@ static inline void __iomem *omap4_get_scu_base(void)
#endif
extern void __init gic_init_irq(void);
+extern void gic_dist_disable(void);
extern void omap_smc1(u32 fn, u32 arg);
extern void __iomem *omap4_get_sar_ram_base(void);
extern void omap_do_wfi(void);
@@ -275,6 +276,7 @@ extern void omap_do_wfi(void);
#ifdef CONFIG_SMP
/* Needed for secondary core boot */
extern void omap_secondary_startup(void);
+extern void omap_secondary_startup_4460(void);
extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
extern void omap_auxcoreboot_addr(u32 cpu_addr);
extern u32 omap_read_auxcoreboot0(void);
@@ -18,6 +18,8 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#include <plat/omap44xx.h>
+
__CPUINIT
/* Physical address needed since MMU not enabled yet on secondary core */
@@ -64,3 +66,39 @@ hold: ldr r12,=0x103
b secondary_startup
ENDPROC(omap_secondary_startup)
+ENTRY(omap_secondary_startup_4460)
+hold_2: ldr r12,=0x103
+ dsb
+ smc #0 @ read from AuxCoreBoot0
+ mov r0, r0, lsr #9
+ mrc p15, 0, r4, c0, c0, 5
+ and r4, r4, #0x0f
+ cmp r0, r4
+ bne hold_2
+
+ /*
+ * GIC distributor control register has changed between
+ * CortexA9 r1pX and r2pX. The Control Register secure
+ * banked version is now composed of 2 bits:
+ * bit 0 == Secure Enable
+ * bit 1 == Non-Secure Enable
+ * The Non-Secure banked register has not changed
+ * Because the ROM Code is based on the r1pX GIC, the CPU1
+ * GIC restoration will cause a problem to CPU0 Non-Secure SW.
+ * The workaround must be:
+ * 1) Before doing the CPU1 wakeup, CPU0 must disable
+ * the GIC distributor
+ * 2) CPU1 must re-enable the GIC distributor on
+ * it's wakeup path.
+ */
+ ldr r1, =OMAP44XX_GIC_DIST_BASE
+ ldr r0, [r1]
+ orr r0, #1
+ str r0, [r1]
+
+ /*
+ * we've been released from the wait loop,secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+ENDPROC(omap_secondary_startup_4460)
@@ -68,6 +68,7 @@ struct omap4_cpu_pm_info {
void __iomem *scu_sar_addr;
void __iomem *wkup_sar_addr;
void __iomem *l2x0_sar_addr;
+ void (*secondary_startup)(void);
};
static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
@@ -301,6 +302,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
{
unsigned int cpu_state = 0;
+ struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
if (omap_rev() == OMAP4430_REV_ES1_0)
return -ENXIO;
@@ -310,7 +312,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
clear_cpu_prev_pwrst(cpu);
set_cpu_next_pwrst(cpu, power_state);
- set_cpu_wakeup_addr(cpu, virt_to_phys(omap_secondary_startup));
+ set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup));
scu_pwrst_prepare(cpu, power_state);
/*
@@ -361,6 +363,11 @@ int __init omap4_mpuss_init(void)
pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
+ if (cpu_is_omap446x())
+ pm_info->secondary_startup = omap_secondary_startup_4460;
+ else
+ pm_info->secondary_startup = omap_secondary_startup;
+
pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
if (!pm_info->pwrdm) {
pr_err("Lookup failed for CPU1 pwrdm\n");
@@ -32,6 +32,7 @@
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
+#include "pm.h"
#define CPU_MASK 0xff0ffff0
#define CPU_CORTEX_A9 0x410FC090
@@ -118,6 +119,24 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* 4.3.4.2 Power States of CPU0 and CPU1
*/
if (booted) {
+ /*
+ * GIC distributor control register has changed between
+ * CortexA9 r1pX and r2pX. The Control Register secure
+ * banked version is now composed of 2 bits:
+ * bit 0 == Secure Enable
+ * bit 1 == Non-Secure Enable
+ * The Non-Secure banked register has not changed
+ * Because the ROM Code is based on the r1pX GIC, the CPU1
+ * GIC restoration will cause a problem to CPU0 Non-Secure SW.
+ * The workaround must be:
+ * 1) Before doing the CPU1 wakeup, CPU0 must disable
+ * the GIC distributor
+ * 2) CPU1 must re-enable the GIC distributor on
+ * it's wakeup path.
+ */
+ if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD))
+ gic_dist_disable();
+
clkdm_wakeup(cpu1_clkdm);
clkdm_allow_idle(cpu1_clkdm);
} else {
@@ -138,7 +157,14 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init wakeup_secondary(void)
{
+ void *startup_addr = omap_secondary_startup;
void __iomem *base = omap_get_wakeupgen_base();
+
+ if (cpu_is_omap446x()) {
+ startup_addr = omap_secondary_startup_4460;
+ pm44xx_errata |= PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD;
+ }
+
/*
* Write the address of secondary startup routine into the
* AuxCoreBoot1 where ROM code will jump and start executing
@@ -146,7 +172,7 @@ static void __init wakeup_secondary(void)
* A barrier is added to ensure that write buffer is drained
*/
if (omap_secure_apis_support())
- omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
+ omap_auxcoreboot_addr(virt_to_phys(startup_addr));
else
__raw_writel(virt_to_phys(omap5_secondary_startup),
base + OMAP_AUX_CORE_BOOT_1);
@@ -42,6 +42,7 @@ static void __iomem *l2cache_base;
#endif
static void __iomem *sar_ram_base;
+static void __iomem *gic_dist_base_addr;
#ifdef CONFIG_OMAP4_ERRATA_I688
/* Used to implement memory barrier on DRAM path */
@@ -96,7 +97,6 @@ void __init omap_barriers_init(void)
void __init gic_init_irq(void)
{
void __iomem *omap_irq_base;
- void __iomem *gic_dist_base_addr;
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
@@ -111,6 +111,12 @@ void __init gic_init_irq(void)
gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
}
+void gic_dist_disable(void)
+{
+ if (gic_dist_base_addr)
+ __raw_writel(0x0, gic_dist_base_addr + GIC_DIST_CTRL);
+}
+
#ifdef CONFIG_CACHE_L2X0
void __iomem *omap4_get_l2cache_base(void)
@@ -100,6 +100,8 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
static inline void enable_omap3630_toggle_l2_on_restore(void) { }
#endif /* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
+#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0)
+
#if defined(CONFIG_ARCH_OMAP4)
extern u16 pm44xx_errata;
#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))