@@ -48,12 +48,11 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
-#include <mach/ulpi.h>
-
#include "common.h"
#include "devices-imx31.h"
#include "crmregs-imx3.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
static int armadillo5x0_pins[] = {
/* UART1 */
@@ -35,12 +35,12 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "common.h"
#include "devices-imx27.h"
#include "eukrea-baseboards.h"
#include "iomux-mx27.h"
+#include "ulpi.h"
static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
@@ -37,12 +37,12 @@
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx27.h"
#include "iomux-mx27.h"
+#include "ulpi.h"
#define SD1_EN_GPIO IMX_GPIO_NR(2, 25)
#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23)
@@ -37,12 +37,12 @@
#include <asm/memory.h>
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include <mach/ulpi.h>
#include "3ds_debugboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
static int mx31_3ds_pins[] = {
/* UART1 */
@@ -43,12 +43,12 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "board-mx31lilly.h"
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
/*
* This file contains module-specific initialization routines for LILLY-1131.
@@ -40,12 +40,12 @@
#include <asm/setup.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "board-mx31lite.h"
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
/*
* This file contains the module-specific initialization routines.
@@ -43,13 +43,13 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include <linux/platform_data/asoc-imx-ssi.h>
#include "board-mx31moboard.h"
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int moboard_pins[] = {
/* UART0 */
@@ -34,11 +34,11 @@
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
-#include <mach/ulpi.h>
#include "common.h"
#include "devices-imx27.h"
#include "iomux-mx27.h"
+#include "ulpi.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
@@ -43,12 +43,12 @@
#include <asm/mach/map.h>
#include <asm/memblock.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
#include "pcm037.h"
+#include "ulpi.h"
static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
@@ -34,12 +34,12 @@
#include <asm/mach/time.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "board-pcm038.h"
#include "common.h"
#include "devices-imx27.h"
#include "iomux-mx27.h"
+#include "ulpi.h"
static const int pcm038_pins[] __initconst = {
/* UART1 */
@@ -34,11 +34,11 @@
#include <asm/mach/map.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "common.h"
#include "devices-imx35.h"
#include "iomux-mx35.h"
+#include "ulpi.h"
static const struct fb_videomode fb_modedb[] = {
{
@@ -23,11 +23,11 @@
#include <linux/usb/otg.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int devboard_pins[] = {
/* UART1 */
@@ -25,13 +25,13 @@
#include <linux/usb/otg.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include <media/soc_camera.h>
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int marxbot_pins[] = {
/* SDHC2 */
@@ -24,7 +24,6 @@
#include <linux/usb/ulpi.h>
#include <mach/hardware.h>
-#include <mach/ulpi.h>
#include <media/soc_camera.h>
@@ -32,6 +31,7 @@
#include "common.h"
#include "devices-imx31.h"
#include "iomux-mx3.h"
+#include "ulpi.h"
static unsigned int smartbot_pins[] = {
/* UART1 */
@@ -24,7 +24,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
+#include "ulpi.h"
/* ULPIVIEW register bits */
#define ULPIVW_WU (1 << 31) /* Wakeup */
Rename mach-imx/include/mach/ulpi.h to mach-imx/ulpi.h, and update users to include ulpi.h rather than mach/ulpi.h. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/mach-imx/mach-armadillo5x0.c | 3 +-- arch/arm/mach-imx/mach-cpuimx27.c | 2 +- arch/arm/mach-imx/mach-mx27_3ds.c | 2 +- arch/arm/mach-imx/mach-mx31_3ds.c | 2 +- arch/arm/mach-imx/mach-mx31lilly.c | 2 +- arch/arm/mach-imx/mach-mx31lite.c | 2 +- arch/arm/mach-imx/mach-mx31moboard.c | 2 +- arch/arm/mach-imx/mach-pca100.c | 2 +- arch/arm/mach-imx/mach-pcm037.c | 2 +- arch/arm/mach-imx/mach-pcm038.c | 2 +- arch/arm/mach-imx/mach-pcm043.c | 2 +- arch/arm/mach-imx/mx31moboard-devboard.c | 2 +- arch/arm/mach-imx/mx31moboard-marxbot.c | 2 +- arch/arm/mach-imx/mx31moboard-smartbot.c | 2 +- arch/arm/mach-imx/ulpi.c | 2 +- arch/arm/mach-imx/{include/mach => }/ulpi.h | 0 16 files changed, 15 insertions(+), 16 deletions(-) rename arch/arm/mach-imx/{include/mach => }/ulpi.h (100%) diff --git a/arch/arm/mach-imx/include/mach/ulpi.h b/arch/arm/mach-imx/ulpi.h similarity index 100% rename from arch/arm/mach-imx/include/mach/ulpi.h rename to arch/arm/mach-imx/ulpi.h