diff mbox

[v2,10/13] ARM: vexpress: Add config bus components and clocks to DTs

Message ID 1347977875-16855-11-git-send-email-pawel.moll@arm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Pawel Moll Sept. 18, 2012, 2:17 p.m. UTC 
Add description of all functions provided by Versatile Express
motherboard and daughterboards configuration controllers and
clock dependencies between devices.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
---
 arch/arm/boot/dts/vexpress-v2m-rs1.dtsi     |  134 ++++++++++++++++++++-
 arch/arm/boot/dts/vexpress-v2m.dtsi         |  134 ++++++++++++++++++++-
 arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts |  109 +++++++++++++++++
 arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts  |  173 +++++++++++++++++++++++++++
 arch/arm/boot/dts/vexpress-v2p-ca5s.dts     |   73 +++++++++++
 arch/arm/boot/dts/vexpress-v2p-ca9.dts      |  119 ++++++++++++++++++
 6 files changed, 738 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index d8a827b..fffda1f 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -24,6 +24,7 @@ 
 
 	motherboard {
 		compatible = "simple-bus";
+		arm,vexpress,site = <0>;
 		arm,v2m-memory-map = "rs1";
 		#address-cells = <2>; /* SMB chipselect number and offset */
 		#size-cells = <1>;
@@ -72,14 +73,20 @@ 
 			#size-cells = <1>;
 			ranges = <0 3 0 0x200000>;
 
-			sysreg@010000 {
+			v2m_sysreg: sysreg@010000 {
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x010000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
-			sysctl@020000 {
+			v2m_sysctl: sysctl@020000 {
 				compatible = "arm,sp810", "arm,primecell";
 				reg = <0x020000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 			};
 
 			/* PCI-E I2C bus */
@@ -100,66 +107,92 @@ 
 				compatible = "arm,pl041", "arm,primecell";
 				reg = <0x040000 0x1000>;
 				interrupts = <11>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
 			};
 
 			mmci@050000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x050000 0x1000>;
 				interrupts = <9 10>;
+				cd-gpios = <&v2m_sysreg 0 0>;
+				wp-gpios = <&v2m_sysreg 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "mclk", "apb_pclk";
 			};
 
 			kmi@060000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x060000 0x1000>;
 				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
 			};
 
 			kmi@070000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x070000 0x1000>;
 				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
 			};
 
 			v2m_serial0: uart@090000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x090000 0x1000>;
 				interrupts = <5>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			v2m_serial1: uart@0a0000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0a0000 0x1000>;
 				interrupts = <6>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			v2m_serial2: uart@0b0000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0b0000 0x1000>;
 				interrupts = <7>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			v2m_serial3: uart@0c0000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0c0000 0x1000>;
 				interrupts = <8>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			wdt@0f0000 {
 				compatible = "arm,sp805", "arm,primecell";
 				reg = <0x0f0000 0x1000>;
 				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&smbclk>;
+				clock-names = "wdogclk", "apb_pclk";
 			};
 
 			v2m_timer01: timer@110000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x110000 0x1000>;
 				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
 			};
 
 			v2m_timer23: timer@120000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x120000 0x1000>;
 				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
 			};
 
 			/* DVI I2C bus */
@@ -185,6 +218,8 @@ 
 				compatible = "arm,pl031", "arm,primecell";
 				reg = <0x170000 0x1000>;
 				interrupts = <4>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
 			};
 
 			compact-flash@1a0000 {
@@ -198,6 +233,8 @@ 
 				compatible = "arm,pl111", "arm,primecell";
 				reg = <0x1f0000 0x1000>;
 				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&smbclk>;
+				clock-names = "clcdclk", "apb_pclk";
 			};
 		};
 
@@ -208,5 +245,98 @@ 
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		mcc {
+			compatible = "simple-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			osc@0 {
+				/* MCC static memory clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 0>;
+				freq-range = <25000000 60000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk0";
+			};
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 63500000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			v2m_oscclk2: osc@2 {
+				/* IO FPGA peripheral clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 2>;
+				freq-range = <24000000 24000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk2";
+			};
+
+			volt@0 {
+				/* Logic level voltage */
+				compatible = "arm,vexpress-volt";
+				arm,vexpress-sysreg,func = <2 0>;
+				regulator-name = "VIO";
+				regulator-always-on;
+			};
+
+			temp@0 {
+				/* MCC internal operating temperature */
+				compatible = "arm,vexpress-temp";
+				arm,vexpress-sysreg,func = <4 0>;
+				label = "MCC";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index dba53fd..10e05d9 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -24,6 +24,7 @@ 
 
 	motherboard {
 		compatible = "simple-bus";
+		arm,vexpress,site = <0>;
 		#address-cells = <2>; /* SMB chipselect number and offset */
 		#size-cells = <1>;
 		#interrupt-cells = <1>;
@@ -71,14 +72,20 @@ 
 			#size-cells = <1>;
 			ranges = <0 7 0 0x20000>;
 
-			sysreg@00000 {
+			v2m_sysreg: sysreg@00000 {
 				compatible = "arm,vexpress-sysreg";
 				reg = <0x00000 0x1000>;
+				gpio-controller;
+				#gpio-cells = <2>;
 			};
 
-			sysctl@01000 {
+			v2m_sysctl: sysctl@01000 {
 				compatible = "arm,sp810", "arm,primecell";
 				reg = <0x01000 0x1000>;
+				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+				clock-names = "refclk", "timclk", "apb_pclk";
+				#clock-cells = <1>;
+				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
 			};
 
 			/* PCI-E I2C bus */
@@ -99,66 +106,92 @@ 
 				compatible = "arm,pl041", "arm,primecell";
 				reg = <0x04000 0x1000>;
 				interrupts = <11>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
 			};
 
 			mmci@05000 {
 				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x05000 0x1000>;
 				interrupts = <9 10>;
+				cd-gpios = <&v2m_sysreg 0 0>;
+				wp-gpios = <&v2m_sysreg 1 0>;
+				max-frequency = <12000000>;
+				vmmc-supply = <&v2m_fixed_3v3>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "mclk", "apb_pclk";
 			};
 
 			kmi@06000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x06000 0x1000>;
 				interrupts = <12>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
 			};
 
 			kmi@07000 {
 				compatible = "arm,pl050", "arm,primecell";
 				reg = <0x07000 0x1000>;
 				interrupts = <13>;
+				clocks = <&v2m_clk24mhz>, <&smbclk>;
+				clock-names = "KMIREFCLK", "apb_pclk";
 			};
 
 			v2m_serial0: uart@09000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x09000 0x1000>;
 				interrupts = <5>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			v2m_serial1: uart@0a000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0a000 0x1000>;
 				interrupts = <6>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			v2m_serial2: uart@0b000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0b000 0x1000>;
 				interrupts = <7>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			v2m_serial3: uart@0c000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x0c000 0x1000>;
 				interrupts = <8>;
+				clocks = <&v2m_oscclk2>, <&smbclk>;
+				clock-names = "uartclk", "apb_pclk";
 			};
 
 			wdt@0f000 {
 				compatible = "arm,sp805", "arm,primecell";
 				reg = <0x0f000 0x1000>;
 				interrupts = <0>;
+				clocks = <&v2m_refclk32khz>, <&smbclk>;
+				clock-names = "wdogclk", "apb_pclk";
 			};
 
 			v2m_timer01: timer@11000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x11000 0x1000>;
 				interrupts = <2>;
+				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
 			};
 
 			v2m_timer23: timer@12000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x12000 0x1000>;
 				interrupts = <3>;
+				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+				clock-names = "timclken1", "timclken2", "apb_pclk";
 			};
 
 			/* DVI I2C bus */
@@ -184,6 +217,8 @@ 
 				compatible = "arm,pl031", "arm,primecell";
 				reg = <0x17000 0x1000>;
 				interrupts = <4>;
+				clocks = <&smbclk>;
+				clock-names = "apb_pclk";
 			};
 
 			compact-flash@1a000 {
@@ -197,6 +232,8 @@ 
 				compatible = "arm,pl111", "arm,primecell";
 				reg = <0x1f000 0x1000>;
 				interrupts = <14>;
+				clocks = <&v2m_oscclk1>, <&smbclk>;
+				clock-names = "clcdclk", "apb_pclk";
 			};
 		};
 
@@ -207,5 +244,98 @@ 
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
+
+		v2m_clk24mhz: clk24mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24000000>;
+			clock-output-names = "v2m:clk24mhz";
+		};
+
+		v2m_refclk1mhz: refclk1mhz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1000000>;
+			clock-output-names = "v2m:refclk1mhz";
+		};
+
+		v2m_refclk32khz: refclk32khz {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+			clock-output-names = "v2m:refclk32khz";
+		};
+
+		mcc {
+			compatible = "simple-bus";
+			arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+			osc@0 {
+				/* MCC static memory clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 0>;
+				freq-range = <25000000 60000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk0";
+			};
+
+			v2m_oscclk1: osc@1 {
+				/* CLCD clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 1>;
+				freq-range = <23750000 63500000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk1";
+			};
+
+			v2m_oscclk2: osc@2 {
+				/* IO FPGA peripheral clock */
+				compatible = "arm,vexpress-osc";
+				arm,vexpress-sysreg,func = <1 2>;
+				freq-range = <24000000 24000000>;
+				#clock-cells = <0>;
+				clock-output-names = "v2m:oscclk2";
+			};
+
+			volt@0 {
+				/* Logic level voltage */
+				compatible = "arm,vexpress-volt";
+				arm,vexpress-sysreg,func = <2 0>;
+				regulator-name = "VIO";
+				regulator-always-on;
+			};
+
+			temp@0 {
+				/* MCC internal operating temperature */
+				compatible = "arm,vexpress-temp";
+				arm,vexpress-sysreg,func = <4 0>;
+				label = "MCC";
+			};
+
+			reset@0 {
+				compatible = "arm,vexpress-reset";
+				arm,vexpress-sysreg,func = <5 0>;
+			};
+
+			muxfpga@0 {
+				compatible = "arm,vexpress-muxfpga";
+				arm,vexpress-sysreg,func = <7 0>;
+			};
+
+			shutdown@0 {
+				compatible = "arm,vexpress-shutdown";
+				arm,vexpress-sysreg,func = <8 0>;
+			};
+
+			reboot@0 {
+				compatible = "arm,vexpress-reboot";
+				arm,vexpress-sysreg,func = <9 0>;
+			};
+
+			dvimode@0 {
+				compatible = "arm,vexpress-dvimode";
+				arm,vexpress-sysreg,func = <11 0>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index d12b34c..7c237af 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -12,6 +12,7 @@ 
 / {
 	model = "V2P-CA15";
 	arm,hbi = <0x237>;
+	arm,vexpress,site = <0xf>;
 	compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
@@ -54,17 +55,24 @@ 
 		compatible = "arm,hdlcd";
 		reg = <0 0x2b000000 0 0x1000>;
 		interrupts = <0 85 4>;
+		clocks = <&oscclk5>;
+		clock-names = "pxlclk";
 	};
 
 	memory-controller@2b0a0000 {
 		compatible = "arm,pl341", "arm,primecell";
 		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
 	};
 
 	wdt@2b060000 {
 		compatible = "arm,sp805", "arm,primecell";
+		status = "disabled";
 		reg = <0 0x2b060000 0 0x1000>;
 		interrupts = <98>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
 	};
 
 	gic: interrupt-controller@2c001000 {
@@ -84,6 +92,8 @@ 
 		reg = <0 0x7ffd0000 0 0x1000>;
 		interrupts = <0 86 4>,
 			     <0 87 4>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
 	};
 
 	dma@7ffb0000 {
@@ -94,6 +104,8 @@ 
 			     <0 89 4>,
 			     <0 90 4>,
 			     <0 91 4>;
+		clocks = <&oscclk7>;
+		clock-names = "apb_pclk";
 	};
 
 	timer {
@@ -110,6 +122,103 @@ 
 			     <0 69 4>;
 	};
 
+	dcc {
+		compatible = "simple-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* CPU PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		osc@4 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		oscclk5: osc@5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: osc@6 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		oscclk7: osc@7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <20000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		osc@8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <40000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt@0 {
+			/* CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "Cores";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		amp@0 {
+			/* Total current for the two cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "Cores";
+		};
+
+		temp@0 {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power@0 {
+			/* Total power */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "Cores";
+		};
+
+		energy@0 {
+			/* Total energy */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "Cores";
+		};
+	};
+
 	motherboard {
 		ranges = <0 0 0 0x08000000 0x04000000>,
 			 <1 0 0 0x14000000 0x04000000>,
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 4890a81..c41a82d 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -12,6 +12,7 @@ 
 / {
 	model = "V2P-CA15_CA7";
 	arm,hbi = <0x249>;
+	arm,vexpress,site = <0xf>;
 	compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
@@ -74,17 +75,23 @@ 
 		compatible = "arm,sp805", "arm,primecell";
 		reg = <0 0x2a490000 0 0x1000>;
 		interrupts = <98>;
+		clocks = <&oscclk6a>, <&oscclk6a>;
+		clock-names = "wdogclk", "apb_pclk";
 	};
 
 	hdlcd@2b000000 {
 		compatible = "arm,hdlcd";
 		reg = <0 0x2b000000 0 0x1000>;
 		interrupts = <0 85 4>;
+		clocks = <&oscclk5>;
+		clock-names = "pxlclk";
 	};
 
 	memory-controller@2b0a0000 {
 		compatible = "arm,pl341", "arm,primecell";
 		reg = <0 0x2b0a0000 0 0x1000>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
 	};
 
 	gic: interrupt-controller@2c001000 {
@@ -104,6 +111,8 @@ 
 		reg = <0 0x7ffd0000 0 0x1000>;
 		interrupts = <0 86 4>,
 			     <0 87 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
 	};
 
 	dma@7ff00000 {
@@ -114,6 +123,8 @@ 
 			     <0 89 4>,
 			     <0 90 4>,
 			     <0 91 4>;
+		clocks = <&oscclk6a>;
+		clock-names = "apb_pclk";
 	};
 
 	timer {
@@ -130,6 +141,168 @@ 
 			     <0 69 4>;
 	};
 
+	oscclk6a: oscclk6a {
+		/* Reference 24MHz clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "oscclk6a";
+	};
+
+	dcc {
+		compatible = "simple-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* A15 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		osc@1 {
+			/* A15 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		osc@2 {
+			/* A7 PLL 0 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		osc@3 {
+			/* A7 PLL 1 reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		osc@4 {
+			/* External AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		oscclk5: osc@5 {
+			/* HDLCD PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		smbclk: osc@6 {
+			/* Static memory controller clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 6>;
+			freq-range = <20000000 40000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk6";
+		};
+
+		osc@7 {
+			/* SYS PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 7>;
+			freq-range = <17000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk7";
+		};
+
+		osc@8 {
+			/* DDR2 PLL reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 8>;
+			freq-range = <20000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk8";
+		};
+
+		volt@0 {
+			/* A15 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "A15 Vcore";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		volt@1 {
+			/* A7 CPU core voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "A7 Vcore";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-always-on;
+		};
+
+		amp@0 {
+			/* Total current for the two A15 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "A15 Icore";
+		};
+
+		amp@1 {
+			/* Total current for the three A7 cores */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "A7 Icore";
+		};
+
+		temp@0 {
+			/* DCC internal temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+
+		power@0 {
+			/* Total power for the two A15 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "A15 Pcore";
+		};
+		power@1 {
+			/* Total power for the three A7 cores */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "A7 Pcore";
+		};
+
+		energy@0 {
+			/* Total energy for the two A15 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 0>;
+			label = "A15 Jcore";
+		};
+
+		energy@2 {
+			/* Total energy for the three A7 cores */
+			compatible = "arm,vexpress-energy";
+			arm,vexpress-sysreg,func = <13 2>;
+			label = "A7 Jcore";
+		};
+	};
+
 	motherboard {
 		ranges = <0 0 0 0x08000000 0x04000000>,
 			 <1 0 0 0x14000000 0x04000000>,
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
index 18917a0..94486d6 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts
@@ -12,6 +12,7 @@ 
 / {
 	model = "V2P-CA5s";
 	arm,hbi = <0x225>;
+	arm,vexpress,site = <0xf>;
 	compatible = "arm,vexpress,v2p-ca5s", "arm,vexpress";
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
@@ -56,11 +57,15 @@ 
 		compatible = "arm,hdlcd";
 		reg = <0x2a110000 0x1000>;
 		interrupts = <0 85 4>;
+		clocks = <&oscclk3>;
+		clock-names = "pxlclk";
 	};
 
 	memory-controller@2a150000 {
 		compatible = "arm,pl341", "arm,primecell";
 		reg = <0x2a150000 0x1000>;
+		clocks = <&oscclk1>;
+		clock-names = "apb_pclk";
 	};
 
 	memory-controller@2a190000 {
@@ -68,6 +73,8 @@ 
 		reg = <0x2a190000 0x1000>;
 		interrupts = <0 86 4>,
 			     <0 87 4>;
+		clocks = <&oscclk1>;
+		clock-names = "apb_pclk";
 	};
 
 	scu@2c000000 {
@@ -109,6 +116,72 @@ 
 			     <0 69 4>;
 	};
 
+	dcc {
+		compatible = "simple-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* CPU and internal AXI reference clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <50000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk0";
+		};
+
+		oscclk1: osc@1 {
+			/* Multiplexed AXI master clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <5000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk1";
+		};
+
+		osc@2 {
+			/* DDR2 */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <80000000 120000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk2";
+		};
+
+		oscclk3: osc@3 {
+			/* HDLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 3>;
+			freq-range = <23750000 165000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk3";
+		};
+
+		osc@4 {
+			/* Test chip gate configuration */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 4>;
+			freq-range = <80000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk4";
+		};
+
+		smbclk: osc@5 {
+			/* SMB clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 5>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "oscclk5";
+		};
+
+		temp@0 {
+			/* DCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "DCC";
+		};
+	};
+
 	motherboard {
 		ranges = <0 0 0x08000000 0x04000000>,
 			 <1 0 0x14000000 0x04000000>,
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 3f0c736..bebbea4 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -12,6 +12,7 @@ 
 / {
 	model = "V2P-CA9";
 	arm,hbi = <0x191>;
+	arm,vexpress,site = <0xf>;
 	compatible = "arm,vexpress,v2p-ca9", "arm,vexpress";
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
@@ -70,11 +71,15 @@ 
 		compatible = "arm,pl111", "arm,primecell";
 		reg = <0x10020000 0x1000>;
 		interrupts = <0 44 4>;
+		clocks = <&oscclk1>, <&oscclk2>;
+		clock-names = "clcdclk", "apb_pclk";
 	};
 
 	memory-controller@100e0000 {
 		compatible = "arm,pl341", "arm,primecell";
 		reg = <0x100e0000 0x1000>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
 	};
 
 	memory-controller@100e1000 {
@@ -82,6 +87,8 @@ 
 		reg = <0x100e1000 0x1000>;
 		interrupts = <0 45 4>,
 			     <0 46 4>;
+		clocks = <&oscclk2>;
+		clock-names = "apb_pclk";
 	};
 
 	timer@100e4000 {
@@ -89,12 +96,16 @@ 
 		reg = <0x100e4000 0x1000>;
 		interrupts = <0 48 4>,
 			     <0 49 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "timclk", "apb_pclk";
 	};
 
 	watchdog@100e5000 {
 		compatible = "arm,sp805", "arm,primecell";
 		reg = <0x100e5000 0x1000>;
 		interrupts = <0 51 4>;
+		clocks = <&oscclk2>, <&oscclk2>;
+		clock-names = "wdogclk", "apb_pclk";
 	};
 
 	scu@1e000000 {
@@ -140,6 +151,114 @@ 
 			     <0 63 4>;
 	};
 
+	dcc {
+		compatible = "simple-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		osc@0 {
+			/* ACLK clock to the AXI master port on the test chip */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <30000000 50000000>;
+			#clock-cells = <0>;
+			clock-output-names = "extsaxiclk";
+		};
+
+		oscclk1: osc@1 {
+			/* Reference clock for the CLCD */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <10000000 80000000>;
+			#clock-cells = <0>;
+			clock-output-names = "clcdclk";
+		};
+
+		smbclk: oscclk2: osc@2 {
+			/* Reference clock for the test chip internal PLLs */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <33000000 100000000>;
+			#clock-cells = <0>;
+			clock-output-names = "tcrefclk";
+		};
+
+		volt@0 {
+			/* Test Chip internal logic voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VD10";
+			regulator-always-on;
+		};
+
+		volt@1 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 1>;
+			regulator-name = "VD10_S2";
+			regulator-always-on;
+		};
+
+		volt@2 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 2>;
+			regulator-name = "VD10_S3";
+			regulator-always-on;
+		};
+
+		volt@3 {
+			/* DDR2 SDRAM and Test Chip DDR2 I/O supply */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 3>;
+			regulator-name = "VCC1V8";
+			regulator-always-on;
+		};
+
+		volt@4 {
+			/* DDR2 SDRAM VTT termination voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 4>;
+			regulator-name = "DDR2VTT";
+			regulator-always-on;
+		};
+
+		volt@5 {
+			/* Local board supply for miscellaneous logic external to the Test Chip */
+			arm,vexpress-sysreg,func = <2 5>;
+			compatible = "arm,vexpress-volt";
+			regulator-name = "VCC3V3";
+			regulator-always-on;
+		};
+
+		amp@0 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 0>;
+			label = "VD10_S2";
+		};
+
+		amp@1 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-amp";
+			arm,vexpress-sysreg,func = <3 1>;
+			label = "VD10_S3";
+		};
+
+		power@0 {
+			/* PL310, L2 cache, RAM cell supply (not PL310 logic) */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 0>;
+			label = "PVD10_S2";
+		};
+
+		power@1 {
+			/* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */
+			compatible = "arm,vexpress-power";
+			arm,vexpress-sysreg,func = <12 1>;
+			label = "PVD10_S3";
+		};
+	};
+
 	motherboard {
 		ranges = <0 0 0x40000000 0x04000000>,
 			 <1 0 0x44000000 0x04000000>,