diff mbox

[5/5] ARM: tegra: select SPARSE_IRQ

Message ID 1348090279-22631-5-git-send-email-swarren@wwwdotorg.org (mailing list archive)
State New, archived
Headers show

Commit Message

Stephen Warren Sept. 19, 2012, 9:31 p.m. UTC 
From: Stephen Warren <swarren@nvidia.com>

SPARSE_IRQ is required for single zImage support.

With this enabled, we can delete <mach/irqs.h>. This requires removing
one unnecessary include of that file, and hard-coding the PCIe IRQ into
the PCIe driver. This is a hack that will be dealt with as part of
converting the PCIe driver into a true DT-supporting driver.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
 arch/arm/Kconfig                        |    1 +
 arch/arm/mach-tegra/board-dt-tegra20.c  |    1 -
 arch/arm/mach-tegra/include/mach/irqs.h |  182 -------------------------------
 arch/arm/mach-tegra/pcie.c              |    3 +
 4 files changed, 4 insertions(+), 183 deletions(-)
 delete mode 100644 arch/arm/mach-tegra/include/mach/irqs.h

Comments

Stephen Warren Oct. 15, 2012, 6:30 p.m. UTC | #1 
On 09/19/2012 03:31 PM, Stephen Warren wrote:
> SPARSE_IRQ is required for single zImage support.
> 
> With this enabled, we can delete <mach/irqs.h>. This requires removing
> one unnecessary include of that file, and hard-coding the PCIe IRQ into
> the PCIe driver. This is a hack that will be dealt with as part of
> converting the PCIe driver into a true DT-supporting driver.

I have applied this series to Tegra's for-3.8/single-zimage branch.

I'm not sure yet if Tegra will actually be able to be part of single
zImage in 3.8, but this branch will certainly host a fair few changes to
get it very close at least.
diff mbox

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9a87faf..f12088d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -679,6 +679,7 @@  config ARCH_TEGRA
 	select ARCH_HAS_CPUFREQ
 	select USE_OF
 	select COMMON_CLK
+	select SPARSE_IRQ
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index c339444..e1cb597 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -41,7 +41,6 @@ 
 #include <asm/setup.h>
 
 #include <mach/iomap.h>
-#include <mach/irqs.h>
 
 #include "board.h"
 #include "clock.h"
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
deleted file mode 100644
index aad1a2c..0000000
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ /dev/null
@@ -1,182 +0,0 @@ 
-/*
- * arch/arm/mach-tegra/include/mach/irqs.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_IRQS_H
-#define __MACH_TEGRA_IRQS_H
-
-#define INT_GIC_BASE			0
-
-#define IRQ_LOCALTIMER                  29
-
-/* Primary Interrupt Controller */
-#define INT_PRI_BASE			(INT_GIC_BASE + 32)
-#define INT_TMR1			(INT_PRI_BASE + 0)
-#define INT_TMR2			(INT_PRI_BASE + 1)
-#define INT_RTC				(INT_PRI_BASE + 2)
-#define INT_I2S2			(INT_PRI_BASE + 3)
-#define INT_SHR_SEM_INBOX_IBF		(INT_PRI_BASE + 4)
-#define INT_SHR_SEM_INBOX_IBE		(INT_PRI_BASE + 5)
-#define INT_SHR_SEM_OUTBOX_IBF		(INT_PRI_BASE + 6)
-#define INT_SHR_SEM_OUTBOX_IBE		(INT_PRI_BASE + 7)
-#define INT_VDE_UCQ_ERROR		(INT_PRI_BASE + 8)
-#define INT_VDE_SYNC_TOKEN		(INT_PRI_BASE + 9)
-#define INT_VDE_BSE_V			(INT_PRI_BASE + 10)
-#define INT_VDE_BSE_A			(INT_PRI_BASE + 11)
-#define INT_VDE_SXE			(INT_PRI_BASE + 12)
-#define INT_I2S1			(INT_PRI_BASE + 13)
-#define INT_SDMMC1			(INT_PRI_BASE + 14)
-#define INT_SDMMC2			(INT_PRI_BASE + 15)
-#define INT_XIO				(INT_PRI_BASE + 16)
-#define INT_VDE				(INT_PRI_BASE + 17)
-#define INT_AVP_UCQ			(INT_PRI_BASE + 18)
-#define INT_SDMMC3			(INT_PRI_BASE + 19)
-#define INT_USB				(INT_PRI_BASE + 20)
-#define INT_USB2			(INT_PRI_BASE + 21)
-#define INT_PRI_RES_22			(INT_PRI_BASE + 22)
-#define INT_EIDE			(INT_PRI_BASE + 23)
-#define INT_NANDFLASH			(INT_PRI_BASE + 24)
-#define INT_VCP				(INT_PRI_BASE + 25)
-#define INT_APB_DMA			(INT_PRI_BASE + 26)
-#define INT_AHB_DMA			(INT_PRI_BASE + 27)
-#define INT_GNT_0			(INT_PRI_BASE + 28)
-#define INT_GNT_1			(INT_PRI_BASE + 29)
-#define INT_OWR				(INT_PRI_BASE + 30)
-#define INT_SDMMC4			(INT_PRI_BASE + 31)
-
-/* Secondary Interrupt Controller */
-#define INT_SEC_BASE			(INT_PRI_BASE + 32)
-#define INT_GPIO1			(INT_SEC_BASE + 0)
-#define INT_GPIO2			(INT_SEC_BASE + 1)
-#define INT_GPIO3			(INT_SEC_BASE + 2)
-#define INT_GPIO4			(INT_SEC_BASE + 3)
-#define INT_UARTA			(INT_SEC_BASE + 4)
-#define INT_UARTB			(INT_SEC_BASE + 5)
-#define INT_I2C				(INT_SEC_BASE + 6)
-#define INT_SPI				(INT_SEC_BASE + 7)
-#define INT_TWC				(INT_SEC_BASE + 8)
-#define INT_TMR3			(INT_SEC_BASE + 9)
-#define INT_TMR4			(INT_SEC_BASE + 10)
-#define INT_FLOW_RSM0			(INT_SEC_BASE + 11)
-#define INT_FLOW_RSM1			(INT_SEC_BASE + 12)
-#define INT_SPDIF			(INT_SEC_BASE + 13)
-#define INT_UARTC			(INT_SEC_BASE + 14)
-#define INT_MIPI			(INT_SEC_BASE + 15)
-#define INT_EVENTA			(INT_SEC_BASE + 16)
-#define INT_EVENTB			(INT_SEC_BASE + 17)
-#define INT_EVENTC			(INT_SEC_BASE + 18)
-#define INT_EVENTD			(INT_SEC_BASE + 19)
-#define INT_VFIR			(INT_SEC_BASE + 20)
-#define INT_DVC				(INT_SEC_BASE + 21)
-#define INT_SYS_STATS_MON		(INT_SEC_BASE + 22)
-#define INT_GPIO5			(INT_SEC_BASE + 23)
-#define INT_CPU0_PMU_INTR		(INT_SEC_BASE + 24)
-#define INT_CPU1_PMU_INTR		(INT_SEC_BASE + 25)
-#define INT_SEC_RES_26			(INT_SEC_BASE + 26)
-#define INT_S_LINK1			(INT_SEC_BASE + 27)
-#define INT_APB_DMA_COP			(INT_SEC_BASE + 28)
-#define INT_AHB_DMA_COP			(INT_SEC_BASE + 29)
-#define INT_DMA_TX			(INT_SEC_BASE + 30)
-#define INT_DMA_RX			(INT_SEC_BASE + 31)
-
-/* Tertiary Interrupt Controller */
-#define INT_TRI_BASE			(INT_SEC_BASE + 32)
-#define INT_HOST1X_COP_SYNCPT		(INT_TRI_BASE + 0)
-#define INT_HOST1X_MPCORE_SYNCPT	(INT_TRI_BASE + 1)
-#define INT_HOST1X_COP_GENERAL		(INT_TRI_BASE + 2)
-#define INT_HOST1X_MPCORE_GENERAL	(INT_TRI_BASE + 3)
-#define INT_MPE_GENERAL			(INT_TRI_BASE + 4)
-#define INT_VI_GENERAL			(INT_TRI_BASE + 5)
-#define INT_EPP_GENERAL			(INT_TRI_BASE + 6)
-#define INT_ISP_GENERAL			(INT_TRI_BASE + 7)
-#define INT_2D_GENERAL			(INT_TRI_BASE + 8)
-#define INT_DISPLAY_GENERAL		(INT_TRI_BASE + 9)
-#define INT_DISPLAY_B_GENERAL		(INT_TRI_BASE + 10)
-#define INT_HDMI			(INT_TRI_BASE + 11)
-#define INT_TVO_GENERAL			(INT_TRI_BASE + 12)
-#define INT_MC_GENERAL			(INT_TRI_BASE + 13)
-#define INT_EMC_GENERAL			(INT_TRI_BASE + 14)
-#define INT_TRI_RES_15			(INT_TRI_BASE + 15)
-#define INT_TRI_RES_16			(INT_TRI_BASE + 16)
-#define INT_AC97			(INT_TRI_BASE + 17)
-#define INT_SPI_2			(INT_TRI_BASE + 18)
-#define INT_SPI_3			(INT_TRI_BASE + 19)
-#define INT_I2C2			(INT_TRI_BASE + 20)
-#define INT_KBC				(INT_TRI_BASE + 21)
-#define INT_EXTERNAL_PMU		(INT_TRI_BASE + 22)
-#define INT_GPIO6			(INT_TRI_BASE + 23)
-#define INT_TVDAC			(INT_TRI_BASE + 24)
-#define INT_GPIO7			(INT_TRI_BASE + 25)
-#define INT_UARTD			(INT_TRI_BASE + 26)
-#define INT_UARTE			(INT_TRI_BASE + 27)
-#define INT_I2C3			(INT_TRI_BASE + 28)
-#define INT_SPI_4			(INT_TRI_BASE + 29)
-#define INT_TRI_RES_30			(INT_TRI_BASE + 30)
-#define INT_SW_RESERVED			(INT_TRI_BASE + 31)
-
-/* Quaternary Interrupt Controller */
-#define INT_QUAD_BASE			(INT_TRI_BASE + 32)
-#define INT_SNOR			(INT_QUAD_BASE + 0)
-#define INT_USB3			(INT_QUAD_BASE + 1)
-#define INT_PCIE_INTR			(INT_QUAD_BASE + 2)
-#define INT_PCIE_MSI			(INT_QUAD_BASE + 3)
-#define INT_QUAD_RES_4			(INT_QUAD_BASE + 4)
-#define INT_QUAD_RES_5			(INT_QUAD_BASE + 5)
-#define INT_QUAD_RES_6			(INT_QUAD_BASE + 6)
-#define INT_QUAD_RES_7			(INT_QUAD_BASE + 7)
-#define INT_APB_DMA_CH0			(INT_QUAD_BASE + 8)
-#define INT_APB_DMA_CH1			(INT_QUAD_BASE + 9)
-#define INT_APB_DMA_CH2			(INT_QUAD_BASE + 10)
-#define INT_APB_DMA_CH3			(INT_QUAD_BASE + 11)
-#define INT_APB_DMA_CH4			(INT_QUAD_BASE + 12)
-#define INT_APB_DMA_CH5			(INT_QUAD_BASE + 13)
-#define INT_APB_DMA_CH6			(INT_QUAD_BASE + 14)
-#define INT_APB_DMA_CH7			(INT_QUAD_BASE + 15)
-#define INT_APB_DMA_CH8			(INT_QUAD_BASE + 16)
-#define INT_APB_DMA_CH9			(INT_QUAD_BASE + 17)
-#define INT_APB_DMA_CH10		(INT_QUAD_BASE + 18)
-#define INT_APB_DMA_CH11		(INT_QUAD_BASE + 19)
-#define INT_APB_DMA_CH12		(INT_QUAD_BASE + 20)
-#define INT_APB_DMA_CH13		(INT_QUAD_BASE + 21)
-#define INT_APB_DMA_CH14		(INT_QUAD_BASE + 22)
-#define INT_APB_DMA_CH15		(INT_QUAD_BASE + 23)
-#define INT_QUAD_RES_24			(INT_QUAD_BASE + 24)
-#define INT_QUAD_RES_25			(INT_QUAD_BASE + 25)
-#define INT_QUAD_RES_26			(INT_QUAD_BASE + 26)
-#define INT_QUAD_RES_27			(INT_QUAD_BASE + 27)
-#define INT_QUAD_RES_28			(INT_QUAD_BASE + 28)
-#define INT_QUAD_RES_29			(INT_QUAD_BASE + 29)
-#define INT_QUAD_RES_30			(INT_QUAD_BASE + 30)
-#define INT_QUAD_RES_31			(INT_QUAD_BASE + 31)
-
-/* Tegra30 has 5 banks of 32 IRQs */
-#define INT_MAIN_NR			(32 * 5)
-#define INT_GPIO_BASE			(INT_PRI_BASE + INT_MAIN_NR)
-
-/* Tegra30 has 8 banks of 32 GPIOs */
-#define INT_GPIO_NR			(32 * 8)
-
-#define TEGRA_NR_IRQS			(INT_GPIO_BASE + INT_GPIO_NR)
-
-#define INT_BOARD_BASE			TEGRA_NR_IRQS
-#define NR_BOARD_IRQS			32
-
-#define NR_IRQS				(INT_BOARD_BASE + NR_BOARD_IRQS)
-
-#endif
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index a8dba64..e82e8b8 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -43,6 +43,9 @@ 
 
 #include "board.h"
 
+/* Hack - need to parse this from DT */
+#define INT_PCIE_INTR 130
+
 /* register definitions */
 #define AFI_OFFSET	0x3800
 #define PADS_OFFSET	0x3000