diff mbox

ARM: dtb: move all dtb targets to common Makefile

Message ID 1348203840-23559-1-git-send-email-olof@lixom.net (mailing list archive)
State New, archived
Headers show

Commit Message

Olof Johansson Sept. 21, 2012, 5:04 a.m. UTC
Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
the platforms that have had new targets added recently and move them over.

While I was at it, I also made the dtb generation more generic, i.e. if
the platform is enabled then all dtbs for that platform will be created.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: David Brown <davidb@codeaurora.com>
Cc: Barry Song <Baohua.Song@csr.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
---

Already applied to next/multiplatform.

 arch/arm/boot/dts/Makefile           | 16 ++++++++++++++++
 arch/arm/mach-msm/Makefile.boot      |  3 ---
 arch/arm/mach-omap2/Makefile.boot    |  6 ------
 arch/arm/mach-prima2/Makefile.boot   |  2 --
 arch/arm/mach-shmobile/Makefile.boot |  4 ----
 5 files changed, 16 insertions(+), 15 deletions(-)

Comments

Simon Horman Sept. 21, 2012, 5:22 a.m. UTC | #1
On Thu, Sep 20, 2012 at 10:04:00PM -0700, Olof Johansson wrote:
> Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
> the platforms that have had new targets added recently and move them over.
> 
> While I was at it, I also made the dtb generation more generic, i.e. if
> the platform is enabled then all dtbs for that platform will be created.
> 
> Signed-off-by: Olof Johansson <olof@lixom.net>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: David Brown <davidb@codeaurora.com>
> Cc: Barry Song <Baohua.Song@csr.com>
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>

shmobile portions:

Acked-by: Simon Horman <horms@verge.net.au>
Stephen Warren Sept. 21, 2012, 5:29 a.m. UTC | #2
On 09/20/2012 11:04 PM, Olof Johansson wrote:
> Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
> the platforms that have had new targets added recently and move them over.
> 
> While I was at it, I also made the dtb generation more generic, i.e. if
> the platform is enabled then all dtbs for that platform will be created.

> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile

> +dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb

That's still in arch/arm/mach-bcm2835/Makefile.boot.

And I don't see any diffs for Tegra, which added some new files in the
dt and dt2 branches IIRC (e.g. commit
a3ee1293b1bec15e179b5a4c99fe07157de35202). Strangely, git log on arm-soc
for-next commit bc51b817c64e6c3b9865b87a7c3d6b9d6ea9afb2 doesn't show
any edits to arch/arm/mach-tegra/Makefile.boot even though that other
commit I mentioned did touch the file and is in the history??? I guess I
need sleep.
Olof Johansson Sept. 21, 2012, 5:41 a.m. UTC | #3
On Thu, Sep 20, 2012 at 10:29 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> On 09/20/2012 11:04 PM, Olof Johansson wrote:
>> Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
>> the platforms that have had new targets added recently and move them over.
>>
>> While I was at it, I also made the dtb generation more generic, i.e. if
>> the platform is enabled then all dtbs for that platform will be created.
>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>
>> +dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
>
> That's still in arch/arm/mach-bcm2835/Makefile.boot.
>
> And I don't see any diffs for Tegra, which added some new files in the
> dt and dt2 branches IIRC (e.g. commit
> a3ee1293b1bec15e179b5a4c99fe07157de35202). Strangely, git log on arm-soc
> for-next commit bc51b817c64e6c3b9865b87a7c3d6b9d6ea9afb2 doesn't show
> any edits to arch/arm/mach-tegra/Makefile.boot even though that other
> commit I mentioned did touch the file and is in the history??? I guess I
> need sleep.

Odd, something seems to have happened when I did a re-merge of the
branch. You're right, they didn't get moved over properly (I do know
for a fact that I did it by hand earlier tonight though).

I'll fix it up right away and push fresh branches. This means
next/multiplatform and for-next will be rebased shortly. I'll send a
reply when done.


-Olof
Olof Johansson Sept. 21, 2012, 5:59 a.m. UTC | #4
On Thu, Sep 20, 2012 at 10:41 PM, Olof Johansson <olof@lixom.net> wrote:

> I'll fix it up right away and push fresh branches. This means
> next/multiplatform and for-next will be rebased shortly. I'll send a
> reply when done.

Ok, done, should mirror out shortly.

Apologies for the churn; looks like I discovered one of the
limitations of git rerere.


-Olof
David Brown Sept. 24, 2012, 5:40 p.m. UTC | #5
On Thu, Sep 20, 2012 at 10:04:00PM -0700, Olof Johansson wrote:
> Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep
> the platforms that have had new targets added recently and move them over.
> 
> While I was at it, I also made the dtb generation more generic, i.e. if
> the platform is enabled then all dtbs for that platform will be created.
> 
> Signed-off-by: Olof Johansson <olof@lixom.net>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: David Brown <davidb@codeaurora.com>
> Cc: Barry Song <Baohua.Song@csr.com>
> Cc: Simon Horman <horms@verge.net.au>
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> ---
> 
> Already applied to next/multiplatform.
> 
>  arch/arm/mach-msm/Makefile.boot      |  3 ---

Acked-by: David Brown <davidb@codeaurora.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d081e6a..6241732 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -16,6 +16,7 @@  dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
 	usb_a9260.dtb \
 	usb_a9263.dtb \
 	usb_a9g20.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos5250-smdk5250.dtb
@@ -31,6 +32,8 @@  dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
+	msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
 	armada-xp-db.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
@@ -49,7 +52,20 @@  dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle-xm.dtb \
+	omap3-evm.dtb \
+	omap3-tobi.dtb \
+	omap4-panda.dtb \
+	omap4-pandaES.dtb \
+	omap4-var_som.dtb \
+	omap4-sdp.dtb \
+	omap5-evm.dtb
+dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	r8a7740-armadillo800eva.dtb \
+	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
 	spear1340-evb.dtb
 dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
index f7d6ae9..9b803a5 100644
--- a/arch/arm/mach-msm/Makefile.boot
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -1,6 +1,3 @@ 
   zreladdr-y		+= 0x10008000
 params_phys-y		:= 0x10000100
 initrd_phys-y		:= 0x10800000
-
-dtb-$(CONFIG_ARCH_MSM8X60) += msm8660-surf.dtb
-dtb-$(CONFIG_ARCH_MSM8960) += msm8960-cdp.dtb
diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot
index be0fe92..b03e562 100644
--- a/arch/arm/mach-omap2/Makefile.boot
+++ b/arch/arm/mach-omap2/Makefile.boot
@@ -1,9 +1,3 @@ 
   zreladdr-y		+= 0x80008000
 params_phys-y		:= 0x80000100
 initrd_phys-y		:= 0x80800000
-
-dtb-$(CONFIG_SOC_OMAP2420)	+= omap2420-h4.dtb
-dtb-$(CONFIG_ARCH_OMAP3)	+= omap3-beagle-xm.dtb omap3-evm.dtb omap3-tobi.dtb
-dtb-$(CONFIG_ARCH_OMAP4)	+= omap4-panda.dtb omap4-pandaES.dtb
-dtb-$(CONFIG_ARCH_OMAP4)	+= omap4-var_som.dtb omap4-sdp.dtb
-dtb-$(CONFIG_SOC_OMAP5)		+= omap5-evm.dtb
diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot
index 98167da..c77a488 100644
--- a/arch/arm/mach-prima2/Makefile.boot
+++ b/arch/arm/mach-prima2/Makefile.boot
@@ -1,5 +1,3 @@ 
 zreladdr-y		+= 0x00008000
 params_phys-y		:= 0x00000100
 initrd_phys-y		:= 0x00800000
-
-dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 5e41019..498efd9 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,7 +7,3 @@  __ZRELADDR	:= $(shell /bin/bash -c 'printf "0x%08x" \
 #
 #params_phys-y (Instead: Pass atags pointer in r2)
 #initrd_phys-y (Instead: Use compiled-in initramfs)
-
-dtb-$(CONFIG_MACH_KZM9G) += sh73a0-kzm9g.dtb
-dtb-$(CONFIG_MACH_KZM9D) += emev2-kzm9d.dtb
-dtb-$(CONFIG_MACH_ARMADILLO800EVA) += r8a7740-armadillo800eva.dtb