diff mbox

[1/1] mfd: Provide the PRCMU with its own IRQ domain

Message ID 1348474306-25155-1-git-send-email-lee.jones@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Lee Jones Sept. 24, 2012, 8:11 a.m. UTC
The PRCMU has its own USB, Thermal, GPIO, Modem, HSI and RTC drivers,
amongst other things. This patch allows those subordinate devices to
use it as an interrupt controller as and when they are DT enabled.

CC: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/mfd/db8500-prcmu.c |   48 ++++++++++++++++++++++++++++++++------------
 1 file changed, 35 insertions(+), 13 deletions(-)

Comments

Linus Walleij Sept. 24, 2012, 8:14 p.m. UTC | #1
On Mon, Sep 24, 2012 at 10:11 AM, Lee Jones <lee.jones@linaro.org> wrote:

> The PRCMU has its own USB, Thermal, GPIO, Modem, HSI and RTC drivers,
> amongst other things. This patch allows those subordinate devices to
> use it as an interrupt controller as and when they are DT enabled.
>
> CC: Samuel Ortiz <sameo@linux.intel.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

This is good stuff.
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Sam, please pick this up, IRQdomains are a pathway to many
good things.

Yours,
Linus Walleij
Samuel Ortiz Sept. 24, 2012, 8:59 p.m. UTC | #2
Hi Linus,

On Mon, Sep 24, 2012 at 10:14:02PM +0200, Linus Walleij wrote:
> On Mon, Sep 24, 2012 at 10:11 AM, Lee Jones <lee.jones@linaro.org> wrote:
> 
> > The PRCMU has its own USB, Thermal, GPIO, Modem, HSI and RTC drivers,
> > amongst other things. This patch allows those subordinate devices to
> > use it as an interrupt controller as and when they are DT enabled.
> >
> > CC: Samuel Ortiz <sameo@linux.intel.com>
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> 
> This is good stuff.
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Sam, please pick this up, IRQdomains are a pathway to many
> good things.
Yes, I asked Lee to re-spin this one so that I could pick it up.
Applied and pushed now, thanks guys.

Cheers,
Samuel.
diff mbox

Patch

diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 0e63cdd..9d51585 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -270,6 +270,8 @@  static struct {
 	struct prcmu_fw_version version;
 } fw_info;
 
+static struct irq_domain *db8500_irq_domain;
+
 /*
  * This vector maps irq numbers to the bits in the bit field used in
  * communication with the PRCMU firmware.
@@ -2583,7 +2585,7 @@  static void prcmu_irq_mask(struct irq_data *d)
 
 	spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
 
-	mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
+	mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->hwirq];
 
 	spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
 
@@ -2597,7 +2599,7 @@  static void prcmu_irq_unmask(struct irq_data *d)
 
 	spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
 
-	mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->irq - IRQ_PRCMU_BASE];
+	mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->hwirq];
 
 	spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
 
@@ -2637,9 +2639,37 @@  static char *fw_project_name(u8 project)
 	}
 }
 
+static int db8500_irq_map(struct irq_domain *d, unsigned int virq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(virq, &prcmu_irq_chip,
+				handle_simple_irq);
+	set_irq_flags(virq, IRQF_VALID);
+
+	return 0;
+}
+
+static struct irq_domain_ops db8500_irq_ops = {
+        .map    = db8500_irq_map,
+        .xlate  = irq_domain_xlate_twocell,
+};
+
+static int db8500_irq_init(struct device_node *np)
+{
+	db8500_irq_domain = irq_domain_add_legacy(
+		np, NUM_PRCMU_WAKEUPS, IRQ_PRCMU_BASE,
+		0, &db8500_irq_ops, NULL);
+
+	if (!db8500_irq_domain) {
+		pr_err("Failed to create irqdomain\n");
+		return -ENOSYS;
+	}
+
+	return 0;
+}
+
 void __init db8500_prcmu_early_init(void)
 {
-	unsigned int i;
 	if (cpu_is_u8500v2()) {
 		void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
 
@@ -2683,16 +2713,6 @@  void __init db8500_prcmu_early_init(void)
 	init_completion(&mb5_transfer.work);
 
 	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
-
-	/* Initalize irqs. */
-	for (i = 0; i < NUM_PRCMU_WAKEUPS; i++) {
-		unsigned int irq;
-
-		irq = IRQ_PRCMU_BASE + i;
-		irq_set_chip_and_handler(irq, &prcmu_irq_chip,
-					 handle_simple_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
 }
 
 static void __init init_prcm_registers(void)
@@ -2999,6 +3019,8 @@  static int __devinit db8500_prcmu_probe(struct platform_device *pdev)
 		goto no_irq_return;
 	}
 
+	db8500_irq_init(np);
+
 	for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) {
 		if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) {
 			db8500_prcmu_devs[i].platform_data = ab8500_platdata;