| Message ID | 1348478688-5737-1-git-send-email-peter.ujfalusi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Peter Ujfalusi <peter.ujfalusi@ti.com> [120924 02:24]: > On OMAP4 the i2c1 bus is dedicated for the PMIC and audio related devices. > Manufacturers can opt to use different codec than twl6040 and also can add > audio related IC to the bus (external amplifier for example on SDP4430). > > Make it possible to add different set of additional devices to i2c1 bus on > OMAP4 boards. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > --- > Hi Tony, > > I have refreshed the patch on top of arm-soc/for-next branch. Would it be > possible to queue this patch via arm-soc so it will be in 3.7-rc1 already? > Originally this patch was sent for 3.6... Yes sorry the platform code has been been badly ignored lately.. Let's see if we can still get it in now that there's -rc7 tagged. Regards, Tony > arch/arm/mach-omap2/board-4430sdp.c | 12 +++++++++-- > arch/arm/mach-omap2/board-omap4panda.c | 12 +++++++++-- > arch/arm/mach-omap2/twl-common.c | 37 ++++++++++------------------------ > arch/arm/mach-omap2/twl-common.h | 3 ++- > 4 files changed, 33 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c > index 6fe9079..7c1a662 100644 > --- a/arch/arm/mach-omap2/board-4430sdp.c > +++ b/arch/arm/mach-omap2/board-4430sdp.c > @@ -545,6 +545,14 @@ static struct twl6040_platform_data twl6040_data = { > .audpwron_gpio = 127, > }; > > +static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = { > + { > + I2C_BOARD_INFO("twl6040", 0x4b), > + .irq = OMAP44XX_IRQ_SYS_2N, > + .platform_data = &twl6040_data, > + }, > +}; > + > static struct twl4030_platform_data sdp4430_twldata = { > /* Regulators */ > .vusim = &sdp4430_vusim, > @@ -578,8 +586,8 @@ static int __init omap4_i2c_init(void) > TWL_COMMON_REGULATOR_CLK32KG | > TWL_COMMON_REGULATOR_V1V8 | > TWL_COMMON_REGULATOR_V2V1); > - omap4_pmic_init("twl6030", &sdp4430_twldata, > - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); > + omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo, > + ARRAY_SIZE(sdp4430_i2c_1_boardinfo)); > omap_register_i2c_bus(2, 400, NULL, 0); > omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, > ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c > index 8ebb16c..eb7a9a8 100644 > --- a/arch/arm/mach-omap2/board-omap4panda.c > +++ b/arch/arm/mach-omap2/board-omap4panda.c > @@ -264,6 +264,14 @@ static struct twl6040_platform_data twl6040_data = { > .audpwron_gpio = 127, > }; > > +static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = { > + { > + I2C_BOARD_INFO("twl6040", 0x4b), > + .irq = OMAP44XX_IRQ_SYS_2N, > + .platform_data = &twl6040_data, > + }, > +}; > + > /* Panda board uses the common PMIC configuration */ > static struct twl4030_platform_data omap4_panda_twldata; > > @@ -291,8 +299,8 @@ static int __init omap4_panda_i2c_init(void) > TWL_COMMON_REGULATOR_CLK32KG | > TWL_COMMON_REGULATOR_V1V8 | > TWL_COMMON_REGULATOR_V2V1); > - omap4_pmic_init("twl6030", &omap4_panda_twldata, > - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); > + omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo, > + ARRAY_SIZE(panda_i2c_1_boardinfo)); > omap_register_i2c_bus(2, 400, NULL, 0); > /* > * Bus 3 is attached to the DVI port where devices like the pico DLP > diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c > index 040f480..e279732 100644 > --- a/arch/arm/mach-omap2/twl-common.c > +++ b/arch/arm/mach-omap2/twl-common.c > @@ -40,16 +40,6 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { > .flags = I2C_CLIENT_WAKE, > }; > > -static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { > - { > - .addr = 0x48, > - .flags = I2C_CLIENT_WAKE, > - }, > - { > - I2C_BOARD_INFO("twl6040", 0x4b), > - }, > -}; > - > #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) > static int twl_set_voltage(void *data, int target_uV) > { > @@ -79,30 +69,25 @@ void __init omap_pmic_init(int bus, u32 clkrate, > > void __init omap4_pmic_init(const char *pmic_type, > struct twl4030_platform_data *pmic_data, > - struct twl6040_platform_data *twl6040_data, int twl6040_irq) > + struct i2c_board_info *devices, int nr_devices) > { > /* PMIC part*/ > omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); > - strncpy(omap4_i2c1_board_info[0].type, pmic_type, > - sizeof(omap4_i2c1_board_info[0].type)); > - omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START; > - omap4_i2c1_board_info[0].platform_data = pmic_data; > - > - /* TWL6040 audio IC part */ > - omap4_i2c1_board_info[1].irq = twl6040_irq; > - omap4_i2c1_board_info[1].platform_data = twl6040_data; > - > - omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); > + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); > > + /* Register additional devices on i2c1 bus if needed */ > + if (devices) > + i2c_register_board_info(1, devices, nr_devices); > } > > void __init omap_pmic_late_init(void) > { > - /* Init the OMAP TWL parameters (if PMIC has been registered) */ > - if (pmic_i2c_board_info.irq) > - omap3_twl_init(); > - if (omap4_i2c1_board_info[0].irq) > - omap4_twl_init(); > + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ > + if (!pmic_i2c_board_info.irq) > + return; > + > + omap3_twl_init(); > + omap4_twl_init(); > } > > #if defined(CONFIG_ARCH_OMAP3) > diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h > index d109c09..2256efe 100644 > --- a/arch/arm/mach-omap2/twl-common.h > +++ b/arch/arm/mach-omap2/twl-common.h > @@ -32,6 +32,7 @@ > > struct twl4030_platform_data; > struct twl6040_platform_data; > +struct i2c_board_info; > > void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, > struct twl4030_platform_data *pmic_data); > @@ -51,7 +52,7 @@ static inline void omap3_pmic_init(const char *pmic_type, > > void omap4_pmic_init(const char *pmic_type, > struct twl4030_platform_data *pmic_data, > - struct twl6040_platform_data *audio_data, int twl6040_irq); > + struct i2c_board_info *devices, int nr_devices); > > void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, > u32 pdata_flags, u32 regulators_flags); > -- > 1.7.12 >
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 6fe9079..7c1a662 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -545,6 +545,14 @@ static struct twl6040_platform_data twl6040_data = { .audpwron_gpio = 127, }; +static struct i2c_board_info __initdata sdp4430_i2c_1_boardinfo[] = { + { + I2C_BOARD_INFO("twl6040", 0x4b), + .irq = OMAP44XX_IRQ_SYS_2N, + .platform_data = &twl6040_data, + }, +}; + static struct twl4030_platform_data sdp4430_twldata = { /* Regulators */ .vusim = &sdp4430_vusim, @@ -578,8 +586,8 @@ static int __init omap4_i2c_init(void) TWL_COMMON_REGULATOR_CLK32KG | TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); - omap4_pmic_init("twl6030", &sdp4430_twldata, - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); + omap4_pmic_init("twl6030", &sdp4430_twldata, sdp4430_i2c_1_boardinfo, + ARRAY_SIZE(sdp4430_i2c_1_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 8ebb16c..eb7a9a8 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -264,6 +264,14 @@ static struct twl6040_platform_data twl6040_data = { .audpwron_gpio = 127, }; +static struct i2c_board_info __initdata panda_i2c_1_boardinfo[] = { + { + I2C_BOARD_INFO("twl6040", 0x4b), + .irq = OMAP44XX_IRQ_SYS_2N, + .platform_data = &twl6040_data, + }, +}; + /* Panda board uses the common PMIC configuration */ static struct twl4030_platform_data omap4_panda_twldata; @@ -291,8 +299,8 @@ static int __init omap4_panda_i2c_init(void) TWL_COMMON_REGULATOR_CLK32KG | TWL_COMMON_REGULATOR_V1V8 | TWL_COMMON_REGULATOR_V2V1); - omap4_pmic_init("twl6030", &omap4_panda_twldata, - &twl6040_data, 119 + OMAP44XX_IRQ_GIC_START); + omap4_pmic_init("twl6030", &omap4_panda_twldata, panda_i2c_1_boardinfo, + ARRAY_SIZE(panda_i2c_1_boardinfo)); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 040f480..e279732 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -40,16 +40,6 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = { .flags = I2C_CLIENT_WAKE, }; -static struct i2c_board_info __initdata omap4_i2c1_board_info[] = { - { - .addr = 0x48, - .flags = I2C_CLIENT_WAKE, - }, - { - I2C_BOARD_INFO("twl6040", 0x4b), - }, -}; - #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) static int twl_set_voltage(void *data, int target_uV) { @@ -79,30 +69,25 @@ void __init omap_pmic_init(int bus, u32 clkrate, void __init omap4_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data, - struct twl6040_platform_data *twl6040_data, int twl6040_irq) + struct i2c_board_info *devices, int nr_devices) { /* PMIC part*/ omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); - strncpy(omap4_i2c1_board_info[0].type, pmic_type, - sizeof(omap4_i2c1_board_info[0].type)); - omap4_i2c1_board_info[0].irq = 7 + OMAP44XX_IRQ_GIC_START; - omap4_i2c1_board_info[0].platform_data = pmic_data; - - /* TWL6040 audio IC part */ - omap4_i2c1_board_info[1].irq = twl6040_irq; - omap4_i2c1_board_info[1].platform_data = twl6040_data; - - omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2); + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); + /* Register additional devices on i2c1 bus if needed */ + if (devices) + i2c_register_board_info(1, devices, nr_devices); } void __init omap_pmic_late_init(void) { - /* Init the OMAP TWL parameters (if PMIC has been registered) */ - if (pmic_i2c_board_info.irq) - omap3_twl_init(); - if (omap4_i2c1_board_info[0].irq) - omap4_twl_init(); + /* Init the OMAP TWL parameters (if PMIC has been registerd) */ + if (!pmic_i2c_board_info.irq) + return; + + omap3_twl_init(); + omap4_twl_init(); } #if defined(CONFIG_ARCH_OMAP3) diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h index d109c09..2256efe 100644 --- a/arch/arm/mach-omap2/twl-common.h +++ b/arch/arm/mach-omap2/twl-common.h @@ -32,6 +32,7 @@ struct twl4030_platform_data; struct twl6040_platform_data; +struct i2c_board_info; void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data); @@ -51,7 +52,7 @@ static inline void omap3_pmic_init(const char *pmic_type, void omap4_pmic_init(const char *pmic_type, struct twl4030_platform_data *pmic_data, - struct twl6040_platform_data *audio_data, int twl6040_irq); + struct i2c_board_info *devices, int nr_devices); void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, u32 pdata_flags, u32 regulators_flags);
On OMAP4 the i2c1 bus is dedicated for the PMIC and audio related devices. Manufacturers can opt to use different codec than twl6040 and also can add audio related IC to the bus (external amplifier for example on SDP4430). Make it possible to add different set of additional devices to i2c1 bus on OMAP4 boards. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- Hi Tony, I have refreshed the patch on top of arm-soc/for-next branch. Would it be possible to queue this patch via arm-soc so it will be in 3.7-rc1 already? Originally this patch was sent for 3.6... Regards, Peter arch/arm/mach-omap2/board-4430sdp.c | 12 +++++++++-- arch/arm/mach-omap2/board-omap4panda.c | 12 +++++++++-- arch/arm/mach-omap2/twl-common.c | 37 ++++++++++------------------------ arch/arm/mach-omap2/twl-common.h | 3 ++- 4 files changed, 33 insertions(+), 31 deletions(-)