| Message ID | 1348480425-13848-3-git-send-email-maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello. On 24-09-2012 13:53, Maxime Ripard wrote: > This will allow to add the 3 Nuvoton NAU7802 ADCs and the NXP PCA9555 > GPIO expander eventually. > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm/boot/dts/imx28-cfa10049.dts | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts > index a9288fb..9a55632 100644 > --- a/arch/arm/boot/dts/imx28-cfa10049.dts > +++ b/arch/arm/boot/dts/imx28-cfa10049.dts > @@ -76,6 +76,39 @@ > status = "okay"; > }; > > + i2cmux { > + compatible = "i2c-mux-gpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + mux-gpios = <&gpio1 22 0 &gpio1 23 0>; > + i2c-parent = <&i2c1>; > + > + i2c@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; If you don't have any subnodes the above to props have no sense. > + }; > + WBR, Sergei
Hi Le 24/09/2012 13:52, Sergei Shtylyov a écrit : > On 24-09-2012 13:53, Maxime Ripard wrote: > >> This will allow to add the 3 Nuvoton NAU7802 ADCs and the NXP PCA9555 >> GPIO expander eventually. > >> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> >> --- >> arch/arm/boot/dts/imx28-cfa10049.dts | 33 >> +++++++++++++++++++++++++++++++++ >> 1 file changed, 33 insertions(+) > >> diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts >> b/arch/arm/boot/dts/imx28-cfa10049.dts >> index a9288fb..9a55632 100644 >> --- a/arch/arm/boot/dts/imx28-cfa10049.dts >> +++ b/arch/arm/boot/dts/imx28-cfa10049.dts >> @@ -76,6 +76,39 @@ >> status = "okay"; >> }; >> >> + i2cmux { >> + compatible = "i2c-mux-gpio"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + mux-gpios = <&gpio1 22 0 &gpio1 23 0>; >> + i2c-parent = <&i2c1>; >> + >> + i2c@0 { >> + reg = <0>; >> + #address-cells = <1>; >> + #size-cells = <0>; > > If you don't have any subnodes the above to props have no sense. I will use them with subnodes eventually, with the 3 ADCs and the GPIO expander. So these nodes won't be left empty. On another hand, I can add these props when I'll add the devices, I have no strong opinion here. Maxime
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index a9288fb..9a55632 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -76,6 +76,39 @@ status = "okay"; }; + i2cmux { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio1 22 0 &gpio1 23 0>; + i2c-parent = <&i2c1>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + }; + }; + usbphy1: usbphy@8007e000 { status = "okay"; };
This will allow to add the 3 Nuvoton NAU7802 ADCs and the NXP PCA9555 GPIO expander eventually. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm/boot/dts/imx28-cfa10049.dts | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+)