[2/2] ARM i.MX25: Add devicetree

Message ID	1348556526-9174-3-git-send-email-s.hauer@pengutronix.de (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Sascha Hauer <s.hauer@pengutronix.de> To: <linux-arm-kernel@lists.infradead.org> Subject: [PATCH 2/2] ARM i.MX25: Add devicetree Date: Tue, 25 Sep 2012 09:02:06 +0200 Message-Id: <1348556526-9174-3-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1348556526-9174-1-git-send-email-s.hauer@pengutronix.de> References: <1348556526-9174-1-git-send-email-s.hauer@pengutronix.de> summary: Content analysis details: (-2.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.8 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawn.guo@linaro.org> Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt new file mode 100644 index 0000000..22c1725 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt @@ -0,0 +1,121 @@ +* Clock bindings for Freescale i.MX25 + +Required properties: +- compatible: Should be "fsl,imx25-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX25 +clocks and IDs. + + Clock ID + --------------------------- + dummy 0 + osc 1 + mpll 2 + upll 3 + mpll_cpu_3_4 4 + cpu_sel 5 + cpu 6 + ahb 7 + usb_div 8 + ipg 9 + per0_sel 10 + per1_sel 11 + per2_sel 12 + per3_sel 13 + per4_sel 14 + per5_sel 15 + per6_sel 16 + per7_sel 17 + per8_sel 18 + per9_sel 19 + per10_sel 20 + per11_sel 21 + per12_sel 22 + per13_sel 23 + per14_sel 24 + per15_sel 25 + per0 26 + per1 27 + per2 28 + per3 29 + per4 30 + per5 31 + per6 32 + per7 33 + per8 34 + per9 35 + per10 36 + per11 37 + per12 38 + per13 39 + per14 40 + per15 41 + csi_ipg_per 42 + esdhc1_ipg_per 43 + esdhc2_ipg_per 44 + gpt_ipg_per 45 + i2c_ipg_per 46 + lcdc_ipg_per 47 + nfc_ipg_per 48 + ssi1_ipg_per 49 + ssi2_ipg_per 50 + uart_ipg_per 51 + csi_ahb 52 + esdhc1_ahb 53 + esdhc2_ahb 54 + fec_ahb 55 + lcdc_ahb 56 + sdma_ahb 57 + usbotg_ahb 58 + can1_ipg 59 + can2_ipg 60 + csi_ipg 61 + cspi1_ipg 62 + cspi2_ipg 63 + cspi3_ipg 64 + dryice_ipg 65 + esdhc1_ipg 66 + esdhc2_ipg 67 + fec_ipg 68 + iim_ipg 69 + kpp_ipg 70 + lcdc_ipg 71 + pwm1_ipg 72 + pwm2_ipg 73 + pwm3_ipg 74 + pwm4_ipg 75 + sdma_ipg 76 + ssi1_ipg 77 + ssi2_ipg 78 + tsc_ipg 79 + uart1_ipg 80 + uart2_ipg 81 + uart3_ipg 82 + uart4_ipg 83 + uart5_ipg 84 + wdt_ipg 85 + +Examples: + +clks: ccm@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + clock-output-names = ... + "uart_ipg", + "uart_serial", + ...; +}; + +uart1: serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 79>, <&clks 50>; + clock-names = "ipg", "per"; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi new file mode 100644 index 0000000..5cce7b4 --- /dev/null +++ b/arch/arm/boot/dts/imx25.dtsi @@ -0,0 +1,477 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + }; + + asic: asic-interrupt-controller@68000000 { + compatible = "fsl,imx25-asic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x68000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&asic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + i2c1: i2c@43f80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + clocks = <&clks 46>; + clock-names = ""; + interrupts = <3>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + clocks = <&clks 46>; + clock-names = ""; + interrupts = <10>; + status = "disabled"; + }; + + can1: can@43f88000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f88000 0x4000>; + interrupts = <43>; + clocks = <&clks 59>, <&clks 59>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: can@43f8c000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f8c000 0x4000>; + interrupts = <44>; + clocks = <&clks 60>, <&clks 60>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 80>, <&clks 51>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + clocks = <&clks 81>, <&clks 51>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c2: i2c@43f98000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + clocks = <&clks 46>; + clock-names = ""; + interrupts = <4>; + status = "disabled"; + }; + + owire@43f9c000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43f9c000 0x4000>; + interrupts = <2>; + status = "disabled"; + }; + + spi1: cspi@43fa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x43fa4000 0x4000>; + clocks = <&clks 47>; + clock-names = "ipg"; + interrupts = <14>; + status = "disabled"; + }; + + kpp@43fa8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43fa8000 0x4000>; + interrupts = <24>; + status = "disabled"; + }; + + iomuxc@43fac000{ + compatible = "fsl,imx25-iomuxc"; + reg = <0x43fac000 0x4000>; + }; + + audmux@43fb0000 { + compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; + reg = <0x43fb0000 0x4000>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x40000>; + ranges; + + spi3: cspi@50004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50004000 0x4000>; + interrupts = <0>; + clocks = <&clks 64>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart4: serial@50008000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x50008000 0x4000>; + interrupts = <5>; + clocks = <&clks 83>, <&clks 51>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@5000c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + clocks = <&clks 82>, <&clks 51>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + spi2: cspi@50010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50010000 0x4000>; + clocks = <&clks 63>; + clock-names = "ipg"; + interrupts = <13>; + status = "disabled"; + }; + + ssi2: ssi@50014000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <11>; + status = "disabled"; + }; + + esai@50018000 { + reg = <0x50018000 0x4000>; + interrupts = <7>; + }; + + uart5: serial@5002c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5002c000 0x4000>; + interrupts = <40>; + clocks = <&clks 84>, <&clks 51>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + tsc: tsc@50030000 { + compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; + reg = <0x50030000 0x4000>; + interrupts = <46>; + clocks = <&clks 79>; + clock-names = "ipg"; + status = "disabled"; + }; + + ssi1: ssi@50034000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50034000 0x4000>; + interrupts = <12>; + status = "disabled"; + }; + + fec: ethernet@50038000 { + compatible = "fsl,imx25-fec"; + reg = <0x50038000 0x4000>; + interrupts = <57>; + clocks = <&clks 68>, <&clks 55>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + }; + + aips@53f00000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + clks: ccm@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + gpt4: timer@53f84000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f84000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <1>; + }; + + gpt3: timer@53f88000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f88000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <29>; + }; + + gpt2: timer@53f8c000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f8c000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <53>; + }; + + gpt1: timer@53f90000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <54>; + }; + + epit1: timer@53f94000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f94000 0x4000>; + interrupts = <28>; + }; + + epit2: timer@53f98000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f98000 0x4000>; + interrupts = <27>; + }; + + gpio4: gpio@53f9c000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53f9c000 0x4000>; + interrupts = <23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm2: pwm@53fa0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa0000 0x4000>; + clocks = <&clks 73>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <36>; + }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm3: pwm@53fa8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa8000 0x4000>; + clocks = <&clks 74>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <41>; + }; + + esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <9>; + clocks = <&clks 66>, <&clks 53>, <&clks 43>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + esdhc2: esdhc@53fb8000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb8000 0x4000>; + interrupts = <8>; + clocks = <&clks 67>, <&clks 54>, <&clks 44>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + lcdc@53fbc000 { + reg = <0x53fbc000 0x4000>; + interrupts = <39>; + clocks = <&clks 71>, <&clks 56>, <&clks 47>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + slcdc@53fc0000 { + reg = <0x53fc0000 0x4000>; + interrupts = <38>; + status = "disabled"; + }; + + pwm4: pwm@53fc8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + reg = <0x53fc8000 0x4000>; + clocks = <&clks 75>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <42>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma@53fd4000 { + compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + reg = <0x53fd4000 0x4000>; + clocks = <&clks 76>, <&clks 57>; + clock-names = "ipg", "ahb"; + interrupts = <34>; + }; + + wdog@53fdc000 { + compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 85>; + clock-names = ""; + interrupts = <55>; + }; + + pwm1: pwm@53fe0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fe0000 0x4000>; + clocks = <&clks 72>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <26>; + }; + + usb@53ff4000 { + reg = <0x53ff4000 0x4000>; + }; + + csi@53ff8000 { + reg = <0x53ff8000 0x4000>; + interrupts = <17>; + }; + + dryice@53ffc000 { + compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 65>; + clock-names = "ipg"; + interrupts = <25>; + }; + }; + + emi@80000000 { + compatible = "fsl,emi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3b002000>; + ranges; + + nand@bb000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx25-nand"; + reg = <0xbb000000 0x2000>; + interrupts = <33>; + status = "disabled"; + }; + }; + }; +};

[2/2] ARM i.MX25: Add devicetree

Commit Message

Patch