| Message ID | 1348589142-11983-8-git-send-email-t-kristo@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/mach-omap2/clockdomains3xxx_data.c b/arch/arm/mach-omap2/clockdomains3xxx_data.c index 56089c4..3b3c524 100644 --- a/arch/arm/mach-omap2/clockdomains3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains3xxx_data.c @@ -370,7 +370,7 @@ static struct clockdomain usbhost_am35x_clkdm = { static struct clockdomain per_clkdm = { .name = "per_clkdm", .pwrdm = { .name = "per_pwrdm" }, - .flags = CLKDM_CAN_HWSUP_SWSUP, + .flags = CLKDM_CAN_HWSUP_SWSUP | CLKDM_NO_AUTODEP_DISABLE, .dep_bit = OMAP3430_EN_PER_SHIFT, .wkdep_srcs = per_wkdeps, .sleepdep_srcs = per_sleepdeps,
Previously, PER clock domain was always enabled, as the usecounts for this domain incorrectly always showed positive value. On HW level though, the domain enters idle as it is set in HW supervised mode. Now, when the usecounts reflect real values, PER domain will be put to HWSUP sleep mode, which means its autodeps are deleted. Removing wakedeps for PER domain will cause multiple problems. First of all, coming back from idle, PER domain remains idle as the wakedeps have been disabled for the domain, and this causes a crash with the GPIO code, as the resume code attempts to access domain which is not active. Just enabling the interface clocks for the GPIO does not help, as they are autoidled and don't bring the domain out of idle. Secondly, there are multiple erratas for omap3, which say that the wakedeps should be enabled for the PER domain, see e.g. errata i582 for omap3630. Signed-off-by: Tero Kristo <t-kristo@ti.com> --- arch/arm/mach-omap2/clockdomains3xxx_data.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)