similarity index 98%
rename from arch/arm/boot/dts/tegra20-harmony.dts
rename to arch/arm/boot/dts/tegra20-harmony.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "NVIDIA Tegra2 Harmony evaluation board";
@@ -254,7 +254,7 @@
interrupts = <187 0x04>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
@@ -283,7 +283,7 @@
ti,system-power-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
@@ -433,8 +433,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
vdd_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
similarity index 95%
rename from arch/arm/boot/dts/tegra20-medcom-wide.dts
rename to arch/arm/boot/dts/tegra20-medcom-wide.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20-tamonten.dtsi"
+#include "tegra20-tamonten.dtsi-cpp"
/ {
model = "Avionic Design Medcom-Wide board";
@@ -14,7 +14,7 @@
interrupts = <187 0x04>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
similarity index 98%
rename from arch/arm/boot/dts/tegra20-paz00.dts
rename to arch/arm/boot/dts/tegra20-paz00.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "Toshiba AC100 / Dynabook AZ";
@@ -248,7 +248,7 @@
compatible = "realtek,alc5632";
reg = <0x1e>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
};
};
@@ -261,8 +261,8 @@
compatible = "nvidia,nvec";
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
clock-frequency = <80000>;
request-gpios = <&gpio 170 0>; /* gpio PV2 */
slave-addr = <138>;
@@ -277,7 +277,7 @@
reg = <0x34>;
interrupts = <0 86 0x4>;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
sys-supply = <&p5valw_reg>;
@@ -454,8 +454,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
p5valw_reg: regulator@0 {
compatible = "regulator-fixed";
similarity index 94%
rename from arch/arm/boot/dts/tegra20-plutux.dts
rename to arch/arm/boot/dts/tegra20-plutux.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20-tamonten.dtsi"
+#include "tegra20-tamonten.dtsi-cpp"
/ {
model = "Avionic Design Plutux board";
@@ -14,7 +14,7 @@
interrupts = <187 0x04>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
similarity index 98%
rename from arch/arm/boot/dts/tegra20-seaboard.dts
rename to arch/arm/boot/dts/tegra20-seaboard.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "NVIDIA Seaboard";
@@ -305,7 +305,7 @@
interrupts = <187 0x04>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
@@ -335,8 +335,8 @@
i2cmux {
compatible = "i2c-mux-pinctrl";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
i2c-parent = <&{/i2c@7000c400}>;
@@ -347,14 +347,14 @@
i2c@0 {
reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
};
i2c@1 {
reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
smart-battery@b {
compatible = "ti,bq20z75", "smart-battery-1.1";
@@ -381,7 +381,7 @@
ti,system-power-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
@@ -596,8 +596,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
vdd_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
similarity index 98%
rename from arch/arm/boot/dts/tegra20-tamonten.dtsi
rename to arch/arm/boot/dts/tegra20-tamonten.dtsi-cpp
@@ -1,4 +1,4 @@
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "Avionic Design Tamonten SOM";
@@ -257,7 +257,7 @@
ti,system-power-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
@@ -401,8 +401,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
vdd_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
similarity index 94%
rename from arch/arm/boot/dts/tegra20-tec.dts
rename to arch/arm/boot/dts/tegra20-tec.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20-tamonten.dtsi"
+#include "tegra20-tamonten.dtsi-cpp"
/ {
model = "Avionic Design Tamonten Evaluation Carrier";
@@ -17,7 +17,7 @@
interrupts = <187 0x04>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
similarity index 99%
rename from arch/arm/boot/dts/tegra20-trimslice.dts
rename to arch/arm/boot/dts/tegra20-trimslice.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "Compulab TrimSlice board";
similarity index 98%
rename from arch/arm/boot/dts/tegra20-ventana.dts
rename to arch/arm/boot/dts/tegra20-ventana.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "NVIDIA Tegra2 Ventana evaluation board";
@@ -260,7 +260,7 @@
interrupts = <187 0x04>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
@@ -297,7 +297,7 @@
ti,system-power-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
@@ -440,8 +440,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
vdd_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
similarity index 99%
rename from arch/arm/boot/dts/tegra20-whistler.dts
rename to arch/arm/boot/dts/tegra20-whistler.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra20.dtsi"
+#include "tegra20.dtsi-cpp"
/ {
model = "NVIDIA Tegra2 Whistler evaluation board";
@@ -259,7 +259,7 @@
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
};
max8907@3c {
@@ -505,8 +505,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
usb0_vbus_reg: regulator {
compatible = "regulator-fixed";
similarity index 93%
rename from arch/arm/boot/dts/tegra20.dtsi
rename to arch/arm/boot/dts/tegra20.dtsi-cpp
@@ -1,4 +1,4 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi-cpp"
/ {
compatible = "nvidia,tegra20";
@@ -15,7 +15,7 @@
reg = <0x50041000 0x1000
0x50040100 0x0100>;
interrupt-controller;
- #interrupt-cells = <3>;
+ \#interrupt-cells = <3>;
};
timer@60005000 {
@@ -63,9 +63,9 @@
0 55 0x04
0 87 0x04
0 89 0x04>;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
- #interrupt-cells = <2>;
+ \#interrupt-cells = <2>;
interrupt-controller;
};
@@ -141,7 +141,7 @@
pwm: pwm {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
- #pwm-cells = <2>;
+ \#pwm-cells = <2>;
};
rtc {
@@ -154,8 +154,8 @@
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -163,8 +163,8 @@
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -172,8 +172,8 @@
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -181,8 +181,8 @@
compatible = "nvidia,tegra20-i2c-dvc";
reg = <0x7000d000 0x200>;
interrupts = <0 53 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -207,8 +207,8 @@
memory-controller@7000f400 {
compatible = "nvidia,tegra20-emc";
reg = <0x7000f400 0x200>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
};
usb@c5000000 {
similarity index 96%
rename from arch/arm/boot/dts/tegra30-cardhu-a02.dts
rename to arch/arm/boot/dts/tegra30-cardhu-a02.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra30-cardhu.dtsi"
+#include "tegra30-cardhu.dtsi-cpp"
/* This dts file support the cardhu A02 version of board */
@@ -10,8 +10,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
ddr_reg: regulator@100 {
compatible = "regulator-fixed";
similarity index 96%
rename from arch/arm/boot/dts/tegra30-cardhu-a04.dts
rename to arch/arm/boot/dts/tegra30-cardhu-a04.dts-cpp
@@ -1,6 +1,6 @@
/dts-v1/;
-/include/ "tegra30-cardhu.dtsi"
+#include "tegra30-cardhu.dtsi-cpp"
/* This dts file support the cardhu A04 and later versions of board */
@@ -10,8 +10,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
ddr_reg: regulator@100 {
compatible = "regulator-fixed";
similarity index 98%
rename from arch/arm/boot/dts/tegra30-cardhu.dtsi
rename to arch/arm/boot/dts/tegra30-cardhu.dtsi-cpp
@@ -1,4 +1,4 @@
-/include/ "tegra30.dtsi"
+#include "tegra30.dtsi-cpp"
/**
* This file contains common DT entry for all fab version of Cardhu.
@@ -128,7 +128,7 @@
interrupts = <179 0x04>; /* gpio PW3 */
gpio-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
@@ -153,12 +153,12 @@
reg = <0x2d>;
interrupts = <0 86 0x4>;
- #interrupt-cells = <2>;
+ \#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
vcc1-supply = <&vdd_ac_bat_reg>;
@@ -276,8 +276,8 @@
regulators {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
vdd_ac_bat_reg: regulator@0 {
compatible = "regulator-fixed";
similarity index 93%
rename from arch/arm/boot/dts/tegra30.dtsi
rename to arch/arm/boot/dts/tegra30.dtsi-cpp
@@ -1,4 +1,4 @@
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi-cpp"
/ {
compatible = "nvidia,tegra30";
@@ -15,7 +15,7 @@
reg = <0x50041000 0x1000
0x50040100 0x0100>;
interrupt-controller;
- #interrupt-cells = <3>;
+ \#interrupt-cells = <3>;
};
timer@60005000 {
@@ -82,9 +82,9 @@
0 87 0x04
0 89 0x04
0 125 0x04>;
- #gpio-cells = <2>;
+ \#gpio-cells = <2>;
gpio-controller;
- #interrupt-cells = <2>;
+ \#interrupt-cells = <2>;
interrupt-controller;
};
@@ -137,7 +137,7 @@
pwm: pwm {
compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
- #pwm-cells = <2>;
+ \#pwm-cells = <2>;
};
rtc {
@@ -150,8 +150,8 @@
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
interrupts = <0 38 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -159,8 +159,8 @@
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c400 0x100>;
interrupts = <0 84 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -168,8 +168,8 @@
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c500 0x100>;
interrupts = <0 92 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -177,8 +177,8 @@
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c700 0x100>;
interrupts = <0 120 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -186,8 +186,8 @@
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000d000 0x100>;
interrupts = <0 53 0x04>;
- #address-cells = <1>;
- #size-cells = <0>;
+ \#address-cells = <1>;
+ \#size-cells = <0>;
status = "disabled";
};
@@ -223,8 +223,8 @@
nvidia,dma-request-selector = <&apbdma 1>;
ranges;
- #address-cells = <1>;
- #size-cells = <1>;
+ \#address-cells = <1>;
+ \#size-cells = <1>;
tegra_i2s0: i2s@70080300 {
compatible = "nvidia,tegra30-i2s";