diff mbox

[v2] ASoC: Samsung: Update Kconfig for Exynos5250 and Exynos4412

Message ID 1348741777-29569-1-git-send-email-padma.v@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Padmavathi Venna Sept. 27, 2012, 10:29 a.m. UTC
Update Kconfig file to support the Exynos5250 and Exynos4412

Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
---
 sound/soc/samsung/Kconfig |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

Comments

??? Sept. 28, 2012, 9:53 a.m. UTC | #1
On Thu, Sep 27, 2012 at 07:30 PM, Padmavathi Venna wrote:

> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
> index fe3995c..430783b 100644
> --- a/sound/soc/samsung/Kconfig
> +++ b/sound/soc/samsung/Kconfig
> @@ -1,6 +1,6 @@
>  config SND_SOC_SAMSUNG
>  	tristate "ASoC support for Samsung"
> -	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
> || ARCH_S5P64X0 || ARCH_EXYNOS4
> +	depends on PLAT_SAMSUNG
>  	select S3C64XX_DMA if ARCH_S3C64XX
>  	select S3C2410_DMA if ARCH_S3C24XX
>  	help

This code is already updated.

> @@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
> 
>  config SND_SOC_SAMSUNG_SMDK_WM8994
>  	tristate "SoC I2S Audio support for WM8994 on SMDK"
> -	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
> MACH_SMDK4212)
> +	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
> MACH_SMDK4212 || MACH_SMDK4412 || MACH_EXYNOS5_DT)
>  	depends on I2C=y && GENERIC_HARDIRQS
>  	select MFD_WM8994
>  	select SND_SOC_WM8994

I'm not sure about this since MACH_EXYNOS5_DT can have others instead of SMDK.

Thanks,
Sangsu.
Tushar Behera Sept. 28, 2012, 10:59 a.m. UTC | #2
On 09/28/2012 03:23 PM, Sangsu Park wrote:
> 
> On Thu, Sep 27, 2012 at 07:30 PM, Padmavathi Venna wrote:
> 
>> diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
>> index fe3995c..430783b 100644
>> --- a/sound/soc/samsung/Kconfig
>> +++ b/sound/soc/samsung/Kconfig
>> @@ -1,6 +1,6 @@
>>  config SND_SOC_SAMSUNG
>>  	tristate "ASoC support for Samsung"
>> -	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
>> || ARCH_S5P64X0 || ARCH_EXYNOS4
>> +	depends on PLAT_SAMSUNG
>>  	select S3C64XX_DMA if ARCH_S3C64XX
>>  	select S3C2410_DMA if ARCH_S3C24XX
>>  	help
> 
> This code is already updated.
> 
>> @@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
>>
>>  config SND_SOC_SAMSUNG_SMDK_WM8994
>>  	tristate "SoC I2S Audio support for WM8994 on SMDK"
>> -	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
>> MACH_SMDK4212)
>> +	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
>> MACH_SMDK4212 || MACH_SMDK4412 || MACH_EXYNOS5_DT)
>>  	depends on I2C=y && GENERIC_HARDIRQS
>>  	select MFD_WM8994
>>  	select SND_SOC_WM8994
> 
> I'm not sure about this since MACH_EXYNOS5_DT can have others instead of SMDK.
> 

But there is no other way we can differentiate between two EXYNOS5_DT
based boards in the kernel. So, support for all possible codecs and
sound-cards should be enabled in the kernel. The instantiation of the
drivers should depend on the device-tree entries.

> Thanks,
> Sangsu.
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
Kim Kukjin Oct. 23, 2012, 11:22 a.m. UTC | #3
Tushar Behera wrote:
> 
> On 09/28/2012 03:23 PM, Sangsu Park wrote:
> >
> > On Thu, Sep 27, 2012 at 07:30 PM, Padmavathi Venna wrote:
> >

[...]

> >> @@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
> >>
> >>  config SND_SOC_SAMSUNG_SMDK_WM8994
> >>  	tristate "SoC I2S Audio support for WM8994 on SMDK"
> >> -	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
> >> MACH_SMDK4212)
> >> +	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
> >> MACH_SMDK4212 || MACH_SMDK4412 || MACH_EXYNOS5_DT)
> >>  	depends on I2C=y && GENERIC_HARDIRQS
> >>  	select MFD_WM8994
> >>  	select SND_SOC_WM8994
> >
> > I'm not sure about this since MACH_EXYNOS5_DT can have others instead of
> SMDK.
> >
> 
> But there is no other way we can differentiate between two EXYNOS5_DT
> based boards in the kernel. So, support for all possible codecs and
> sound-cards should be enabled in the kernel. The instantiation of the
> drivers should depend on the device-tree entries.
> 
Hmm...any idea on this?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
Olof Johansson Oct. 23, 2012, 2:54 p.m. UTC | #4
2012/10/23 Kukjin Kim <kgene.kim@samsung.com>:
> Tushar Behera wrote:
>>
>> On 09/28/2012 03:23 PM, Sangsu Park wrote:
>> >
>> > On Thu, Sep 27, 2012 at 07:30 PM, Padmavathi Venna wrote:
>> >
>
> [...]
>
>> >> @@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
>> >>
>> >>  config SND_SOC_SAMSUNG_SMDK_WM8994
>> >>    tristate "SoC I2S Audio support for WM8994 on SMDK"
>> >> -  depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
>> >> MACH_SMDK4212)
>> >> +  depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 ||
>> >> MACH_SMDK4212 || MACH_SMDK4412 || MACH_EXYNOS5_DT)
>> >>    depends on I2C=y && GENERIC_HARDIRQS
>> >>    select MFD_WM8994
>> >>    select SND_SOC_WM8994
>> >
>> > I'm not sure about this since MACH_EXYNOS5_DT can have others instead of
>> SMDK.
>> >
>>
>> But there is no other way we can differentiate between two EXYNOS5_DT
>> based boards in the kernel. So, support for all possible codecs and
>> sound-cards should be enabled in the kernel. The instantiation of the
>> drivers should depend on the device-tree entries.
>>
> Hmm...any idea on this?

Tushar is right. In particular, there is absolutely no reason to
enforce driver selection based on platform enablement, as long as it
still builds no matter what (and if it doesn't, that should probably
be fixed).

It should be possible to enable a superset of all drivers, and only
have the ones that are actually instantiated by platform devices or
device tree entries probe and configure. That's how the kernel works
on nearly all platforms.


So, removing as much "depends on" as possible (probably only keep
SND_SOC_SAMSUNG here) seems like a good choice, and fixing any
compilation errors caused by it.


-Olof
diff mbox

Patch

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index fe3995c..430783b 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -1,6 +1,6 @@ 
 config SND_SOC_SAMSUNG
 	tristate "ASoC support for Samsung"
-	depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4
+	depends on PLAT_SAMSUNG
 	select S3C64XX_DMA if ARCH_S3C64XX
 	select S3C2410_DMA if ARCH_S3C24XX
 	help
@@ -63,7 +63,7 @@  config SND_SOC_SAMSUNG_SMDK_WM8580
 
 config SND_SOC_SAMSUNG_SMDK_WM8994
 	tristate "SoC I2S Audio support for WM8994 on SMDK"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 || MACH_SMDK4212)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDKV310 || MACH_SMDKC210 || MACH_SMDK4212 || MACH_SMDK4412 || MACH_EXYNOS5_DT)
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_WM8994
 	select SND_SOC_WM8994
@@ -162,7 +162,7 @@  config SND_SOC_GONI_AQUILA_WM8994
 
 config SND_SOC_SAMSUNG_SMDK_SPDIF
 	tristate "SoC S/PDIF Audio support for SMDK"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210 || MACH_SMDKV310 || MACH_SMDK4212)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDKC100 || MACH_SMDKC110 || MACH_SMDKV210 || MACH_SMDKV310 || MACH_SMDK4212 || MACH_SMDK4412 || SOC_EXYNOS5250)
 	select SND_SAMSUNG_SPDIF
 	help
 	  Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
@@ -177,7 +177,7 @@  config SND_SOC_SMDK_WM8580_PCM
 
 config SND_SOC_SMDK_WM8994_PCM
 	tristate "SoC PCM Audio support for WM8994 on SMDK"
-	depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310 || MACH_SMDK4212)
+	depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310 || MACH_SMDK4212 || MACH_SMDK4412 || MACH_EXYNOS5_DT)
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_WM8994
 	select SND_SOC_WM8994