From patchwork Thu Sep 27 14:04:07 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kishon Vijay Abraham I X-Patchwork-Id: 1514281 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id 744CDDFE80 for ; Thu, 27 Sep 2012 14:07:21 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1THEi8-0002co-Hk; Thu, 27 Sep 2012 14:05:04 +0000 Received: from devils.ext.ti.com ([198.47.26.153]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1THEhZ-0002Ta-0D for linux-arm-kernel@lists.infradead.org; Thu, 27 Sep 2012 14:04:31 +0000 Received: from dbdp20.itg.ti.com ([172.24.170.38]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id q8RE4JM7014584; Thu, 27 Sep 2012 09:04:20 -0500 Received: from DBDE70.ent.ti.com (localhost [127.0.0.1]) by dbdp20.itg.ti.com (8.13.8/8.13.8) with ESMTP id q8RE4F2G008327; Thu, 27 Sep 2012 19:34:16 +0530 (IST) Received: from dbdp33.itg.ti.com (172.24.170.252) by dbde70.ent.ti.com (172.24.170.148) with Microsoft SMTP Server id 14.1.323.3; Thu, 27 Sep 2012 19:34:15 +0530 Received: from a0393678lt.apr.dhcp.ti.com (smtpvbd.itg.ti.com [172.24.170.250]) by dbdp33.itg.ti.com (8.13.8/8.13.8) with ESMTP id q8RE48OI027866; Thu, 27 Sep 2012 19:34:15 +0530 From: Kishon Vijay Abraham I To: , , , , , , , , , Subject: [PATCH v2 1/2] usb: phy: add a new driver for usb3 phy Date: Thu, 27 Sep 2012 19:34:07 +0530 Message-ID: <1348754648-8315-2-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1348754648-8315-1-git-send-email-kishon@ti.com> References: <1348754648-8315-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 X-Spam-Note: CRM114 invocation failed X-Spam-Score: -7.7 (-------) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-7.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [198.47.26.153 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -0.8 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Moiz Sonasath , Felipe Balbi , Kishon Vijay Abraham I X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Added a driver for usb3 phy that handles the interaction between usb phy device and dwc3 controller. This also includes device tree support for usb3 phy driver and the documentation with device tree binding information is updated. Currently writing to control module register is taken care in this driver which will be removed once the control module driver is in place. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi Signed-off-by: Moiz Sonasath --- Documentation/devicetree/bindings/usb/usb-phy.txt | 18 + drivers/usb/phy/Kconfig | 9 + drivers/usb/phy/Makefile | 1 + drivers/usb/phy/omap-usb3.c | 412 +++++++++++++++++++++ include/linux/usb/omap_usb.h | 33 ++ 5 files changed, 473 insertions(+) create mode 100644 drivers/usb/phy/omap-usb3.c diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt index 80d4148..7c5fd89 100644 --- a/Documentation/devicetree/bindings/usb/usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt @@ -15,3 +15,21 @@ usb2phy@4a0ad080 { reg = <0x4a0ad080 0x58>, <0x4a002300 0x4>; }; + +OMAP USB3 PHY + +Required properties: + - compatible: Should be "ti,omap-usb3" + - reg : Address and length of the register set for the device. Also +add the address of control module phy power register until a driver for +control module is added + +This is usually a subnode of ocp2scp to which it is connected. + +usb3phy@4a084400 { + compatible = "ti,omap-usb3"; + reg = <0x0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>, + <0x4a002370 0x4>; +}; diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 63c339b..353dc0c 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -13,6 +13,15 @@ config OMAP_USB2 The USB OTG controller communicates with the comparator using this driver. +config OMAP_USB3 + tristate "OMAP USB3 PHY Driver" + select USB_OTG_UTILS + help + Enable this to support the USB3 PHY that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + config USB_ISP1301 tristate "NXP ISP1301 USB transceiver support" depends on USB || USB_GADGET diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index b069f29..973b1e6 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -5,6 +5,7 @@ ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG obj-$(CONFIG_OMAP_USB2) += omap-usb2.o +obj-$(CONFIG_OMAP_USB3) += omap-usb3.o obj-$(CONFIG_USB_ISP1301) += isp1301.o obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/omap-usb3.c new file mode 100644 index 0000000..cecfbd4 --- /dev/null +++ b/drivers/usb/phy/omap-usb3.c @@ -0,0 +1,412 @@ +/* + * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NUM_SYS_CLKS 5 +#define PLL_STATUS 0x00000004 +#define PLL_GO 0x00000008 +#define PLL_CONFIGURATION1 0x0000000C +#define PLL_CONFIGURATION2 0x00000010 +#define PLL_CONFIGURATION3 0x00000014 +#define PLL_CONFIGURATION4 0x00000020 + +#define PLL_REGM_MASK 0x001FFE00 +#define PLL_REGM_SHIFT 0x9 +#define PLL_REGM_F_MASK 0x0003FFFF +#define PLL_REGM_F_SHIFT 0x0 +#define PLL_REGN_MASK 0x000001FE +#define PLL_REGN_SHIFT 0x1 +#define PLL_SELFREQDCO_MASK 0x0000000E +#define PLL_SELFREQDCO_SHIFT 0x1 +#define PLL_SD_MASK 0x0003FC00 +#define PLL_SD_SHIFT 0x9 +#define SET_PLL_GO 0x1 +#define PLL_TICOPWDN 0x10000 +#define PLL_LOCK 0x2 +#define PLL_IDLE 0x1 + +/* + * This is an Empirical value that works, need to confirm the actual + * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status + * to be correctly reflected in the USB3PHY_PLL_STATUS register. + */ +# define PLL_IDLE_TIME 100; + +enum sys_clk_rate { + CLK_RATE_UNDEFINED = -1, + CLK_RATE_12MHZ, + CLK_RATE_16MHZ, + CLK_RATE_19MHZ, + CLK_RATE_26MHZ, + CLK_RATE_38MHZ +}; + +static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = { + {1250, 5, 4, 20, 0}, /* 12 MHz */ + {3125, 20, 4, 20, 0}, /* 16.8 MHz */ + {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ + {1250, 12, 4, 20, 0}, /* 26 MHz */ + {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ +}; + +/** + * omap5_usb_phy_power - power on/off the serializer using control module + * @phy: struct omap_usb * + * @on: 0 to off and 1 to on based on powering on or off the PHY + * + * omap_usb3 can call this API to power on or off the PHY. + * + * XXX: Remove this function once control module driver gets merged + */ +static int omap5_usb_phy_power(struct omap_usb *phy, bool on) +{ + u32 val; + unsigned long rate; + struct clk *sys_clk; + + sys_clk = clk_get(NULL, "sys_clkin"); + if (IS_ERR(sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + + rate = clk_get_rate(sys_clk); + rate = rate/1000000; + clk_put(sys_clk); + + val = readl(phy->control_dev); + + if (on) { + val &= ~(USB_PWRCTL_CLK_CMD_MASK | USB_PWRCTL_CLK_FREQ_MASK); + val |= USB3_PHY_TX_RX_POWERON << USB_PWRCTL_CLK_CMD_SHIFT; + val |= rate << USB_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~USB_PWRCTL_CLK_CMD_MASK; + val |= USB3_PHY_TX_RX_POWEROFF << USB_PWRCTL_CLK_CMD_SHIFT; + } + + writel(val, phy->control_dev); + + return 0; +} + +static int omap_usb3_suspend(struct usb_phy *x, int suspend) +{ + struct omap_usb *phy = phy_to_omapusb(x); + int val, ret; + int timeout = PLL_IDLE_TIME; + + if (suspend && !phy->is_suspended) { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val |= PLL_IDLE; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_TICOPWDN) + break; + udelay(1); + } while (--timeout); + + omap5_usb_phy_power(phy, 0); + pm_runtime_put_sync(phy->dev); + + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + phy->is_suspended = 0; + ret = pm_runtime_get_sync(phy->dev); + if (ret < 0) { + dev_err(phy->dev, "get_sync failed with err %d\n", + ret); + return ret; + } + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_IDLE; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (!(val & PLL_TICOPWDN)) + break; + udelay(1); + } while (--timeout); + } + + return 0; +} + +static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate) +{ + switch (rate) { + case 12000000: + return CLK_RATE_12MHZ; + case 16800000: + return CLK_RATE_16MHZ; + case 19200000: + return CLK_RATE_19MHZ; + case 26000000: + return CLK_RATE_26MHZ; + case 38400000: + return CLK_RATE_38MHZ; + default: + return CLK_RATE_UNDEFINED; + } +} + +static void omap_usb_dpll_relock(struct omap_usb *phy) +{ + u32 val; + unsigned long timeout; + + omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); + + timeout = jiffies + msecs_to_jiffies(20); + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_LOCK) + break; + } while (!WARN_ON(time_after(jiffies, timeout))); +} + +static int omap_usb_dpll_lock(struct omap_usb *phy) +{ + u32 val; + struct clk *sys_clk; + unsigned long rate; + enum sys_clk_rate clk_index; + + sys_clk = clk_get(NULL, "sys_clkin"); + if (IS_ERR(sys_clk)) { + pr_err("unable to get sys_clkin\n"); + return PTR_ERR(sys_clk); + } + + rate = clk_get_rate(sys_clk); + clk_index = __get_sys_clk_index(rate); + + if (clk_index == CLK_RATE_UNDEFINED) { + pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate); + return -EINVAL; + } + clk_put(sys_clk); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGN_MASK; + val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_SELFREQDCO_MASK; + val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGM_MASK; + val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); + val &= ~PLL_REGM_F_MASK; + val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); + val &= ~PLL_SD_MASK; + val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); + + omap_usb_dpll_relock(phy); + + return 0; +} + +static int omap_usb3_init(struct usb_phy *x) +{ + struct omap_usb *phy = phy_to_omapusb(x); + + omap_usb_dpll_lock(phy); + omap5_usb_phy_power(phy, 1); + + return 0; +} + +static int __devinit omap_usb3_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct resource *res; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (!res) { + dev_err(&pdev->dev, "unable to get base address of pll_ctrl\n"); + return -ENODEV; + } + + phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res); + if (!phy->pll_ctrl_base) { + dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + if (!res) { + dev_err(&pdev->dev, + "unable to get address of control phy power\n"); + return -ENODEV; + } + + phy->control_dev = devm_request_and_ioremap(&pdev->dev, res); + if (!phy->control_dev) { + dev_err(&pdev->dev, "ioremap of control_dev failed\n"); + return -ENOMEM; + } + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb3"; + phy->phy.init = omap_usb3_init; + phy->phy.set_suspend = omap_usb3_suspend; + + phy->is_suspended = 1; + omap5_usb_phy_power(phy, 0); + + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) { + dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); + return PTR_ERR(phy->optclk); + } + clk_prepare(phy->optclk); + + usb_add_phy(&phy->phy, USB_PHY_TYPE_USB3); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + + return 0; +} + +static int __devexit omap_usb3_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + clk_unprepare(phy->optclk); + usb_remove_phy(&phy->phy); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb3_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb3_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->optclk); + if (ret) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + + ret = clk_enable(phy->wkupclk); + if (ret) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err2; + } + + return 0; + +err2: + clk_disable(phy->optclk); + +err1: + return ret; +} + +static const struct dev_pm_ops omap_usb3_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb3_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb3_id_table[] = { + { .compatible = "ti,omap-usb3" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb3_id_table); +#endif + +static struct platform_driver omap_usb3_driver = { + .probe = omap_usb3_probe, + .remove = __devexit_p(omap_usb3_remove), + .driver = { + .name = "omap-usb3", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb3_id_table), + }, +}; + +module_platform_driver(omap_usb3_driver); + +MODULE_ALIAS("platform: omap_usb3"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB3 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h index 0ea17f8..6947528 100644 --- a/include/linux/usb/omap_usb.h +++ b/include/linux/usb/omap_usb.h @@ -19,19 +19,41 @@ #ifndef __DRIVERS_OMAP_USB2_H #define __DRIVERS_OMAP_USB2_H +#include #include +struct usb_dpll_params { + u16 m; + u8 n; + u8 freq:3; + u8 sd; + u32 mf; +}; + struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; + void __iomem *pll_ctrl_base; struct device *dev; u32 __iomem *control_dev; struct clk *wkupclk; + struct clk *optclk; u8 is_suspended:1; }; #define PHY_PD 0x1 +#define CONTROL_PHY_POWER_USB 0x00000370 + +#define USB_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define USB_PWRCTL_CLK_CMD_SHIFT 0xE + +#define USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define USB_PWRCTL_CLK_FREQ_SHIFT 0x16 + +#define USB3_PHY_TX_RX_POWERON 0x3 +#define USB3_PHY_TX_RX_POWEROFF 0x0 + #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) @@ -43,4 +65,15 @@ static inline int omap_usb2_set_comparator(struct phy_companion *comparator) } #endif +static inline u32 omap_usb_readl(const void __iomem *addr, unsigned offset) +{ + return __raw_readl(addr + offset); +} + +static inline void omap_usb_writel(const void __iomem *addr, unsigned offset, + u32 data) +{ + __raw_writel(data, addr + offset); +} + #endif /* __DRIVERS_OMAP_USB_H */