diff mbox

[09/10] ARM: ux500: Add all bu21013 touch screen components to supported Device Trees

Message ID 1349165603-24401-10-git-send-email-lee.jones@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Lee Jones Oct. 2, 2012, 8:13 a.m. UTC
It is possible to connect a BU21013 Touch Screen to all version
of the HREF which support the ST-UIB. This patch applies all the
necessary settings to the pre-v60 and v60+ HREF Device Trees.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/hrefprev60.dts  |    6 ++++++
 arch/arm/boot/dts/hrefv60plus.dts |    8 ++++++++
 arch/arm/boot/dts/stuib.dtsi      |   23 +++++++++++++++++++++++
 3 files changed, 37 insertions(+)

Comments

Linus Walleij Oct. 2, 2012, 10:58 a.m. UTC | #1
On Tue, Oct 2, 2012 at 10:13 AM, Lee Jones <lee.jones@linaro.org> wrote:

> It is possible to connect a BU21013 Touch Screen to all version
> of the HREF which support the ST-UIB. This patch applies all the
> necessary settings to the pre-v60 and v60+ HREF Device Trees.
>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
index e112cce..cd9e535 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -31,5 +31,11 @@ 
 				reg = <0x33>;
 			};
 		};
+
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index b5fc355..82103a2 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -23,4 +23,12 @@ 
 			gpios = <&gpio6 25 0x4>;
 		};
 	};
+
+	soc-u9500 {
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				reset-gpio = <&gpio4 15 0x4>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index 64ac327..5547f38 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -11,5 +11,28 @@ 
 
 / {
 	soc-u9500 {
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				compatible = "bu21013_tp";
+				reg = <0x5c>;
+				touch-gpio = <&gpio2 20 0x4>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				stericsson,touch-max-x = <384>;
+				stericsson,touch-max-y = <704>;
+				stricsson,flip-y;
+			};
+
+			bu21013_tp@0x5d {
+				compatible = "bu21013_tp";
+				reg = <0x5d>;
+				touch-gpio = <&gpio2 20 0x4>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				stericsson,touch-max-x = <384>;
+				stericsson,touch-max-y = <704>;
+				stricsson,flip-y;
+			};
+		};
 	};
 };