From patchwork Wed Oct 3 14:29:49 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: avinash philip X-Patchwork-Id: 1541871 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id 10A92DFF71 for ; Wed, 3 Oct 2012 14:56:19 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TJQKr-0000Ig-DS; Wed, 03 Oct 2012 14:54:05 +0000 Received: from arroyo.ext.ti.com ([192.94.94.40]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TJQKn-0000Hi-Qe; Wed, 03 Oct 2012 14:54:03 +0000 Received: from dbdp20.itg.ti.com ([172.24.170.38]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id q93Ersfb013959; Wed, 3 Oct 2012 09:53:55 -0500 Received: from DBDE70.ent.ti.com (localhost [127.0.0.1]) by dbdp20.itg.ti.com (8.13.8/8.13.8) with ESMTP id q93ErrBF008340; Wed, 3 Oct 2012 20:23:53 +0530 (IST) Received: from dbdp32.itg.ti.com (172.24.170.251) by dbde70.ent.ti.com (172.24.170.148) with Microsoft SMTP Server id 14.1.323.3; Wed, 3 Oct 2012 20:23:53 +0530 Received: from ucmsshproxy.india.ext.ti.com (dbdp20.itg.ti.com [172.24.170.38]) by dbdp32.itg.ti.com (8.13.8/8.13.8) with SMTP id q93ErrIr014672; Wed, 3 Oct 2012 20:23:53 +0530 Received: from symphony.india.ext.ti.com (unknown [192.168.247.13]) by ucmsshproxy.india.ext.ti.com (Postfix) with ESMTP id 111D3158002; Wed, 3 Oct 2012 20:23:53 +0530 (IST) Received: from localhost.localdomain (linux-psp-server [192.168.247.76]) by symphony.india.ext.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id q93Erq708656; Wed, 3 Oct 2012 20:23:52 +0530 (IST) From: "Philip, Avinash" To: , , Subject: [PATCH 4/4] mtd: nand: omap2: Add data correction support Date: Wed, 3 Oct 2012 19:59:49 +0530 Message-ID: <1349274589-11389-5-git-send-email-avinashphilip@ti.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> References: <1349274589-11389-1-git-send-email-avinashphilip@ti.com> MIME-Version: 1.0 X-Spam-Note: CRM114 invocation failed X-Spam-Score: -9.0 (---------) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-9.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [192.94.94.40 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -2.1 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: afzal@ti.com, linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org, ivan.djelic@parrot.com, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org ELM module can be used for error correction of BCH 4 & 8 bit. Also support read & write page in one shot by adding custom read_page & write_page methods. This helps in optimizing code. New structure member "is_elm_used" is added to know the status of whether the ELM module is used for error correction or not. Note: ECC layout of BCH8 uses 14 bytes for 512 byte of data to make compatible with RBL ECC layout, even though the requirement was only 13 byte. This results a common ecc layout across RBL, U-boot & Linux. Signed-off-by: Philip, Avinash --- :100644 100644 af511a9... 8fd6ddb... M drivers/mtd/nand/omap2.c :100644 100644 1a68c1e... 5b7054e... M include/linux/platform_data/mtd-nand-omap2.h drivers/mtd/nand/omap2.c | 359 +++++++++++++++++++++++--- include/linux/platform_data/mtd-nand-omap2.h | 1 + 2 files changed, 328 insertions(+), 32 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index af511a9..8fd6ddb 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -30,6 +30,7 @@ #include #include #include +#include #define DRIVER_NAME "omap2-nand" #define OMAP_NAND_TIMEOUT_MS 5000 @@ -114,6 +115,12 @@ #define BCH8_MAX_ERROR 8 /* upto 8 bit coorectable */ #define BCH4_MAX_ERROR 4 /* upto 4 bit correctable */ +#define SECTOR_BYTES 512 +/* 4 bit padding to make byte aligned, 56 = 52 + 4 */ +#define BCH4_BIT_PAD 4 +#define BCH8_ECC_MAX ((SECTOR_BYTES + BCH8_ECC_OOB_BYTES) * 8) +#define BCH4_ECC_MAX ((SECTOR_BYTES + BCH4_SIZE) * 8) + /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; /* Define some generic bad / good block scan pattern which are used @@ -153,6 +160,8 @@ struct omap_nand_info { #ifdef CONFIG_MTD_NAND_OMAP_BCH struct bch_control *bch; struct nand_ecclayout ecclayout; + bool is_elm_used; + struct device *elm_dev; #endif }; @@ -892,6 +901,138 @@ static int omap_correct_data(struct mtd_info *mtd, u_char *dat, return stat; } +#ifdef CONFIG_MTD_NAND_OMAP_BCH +/** + * omap_elm_correct_data - corrects page data area in case error reported + * @mtd: MTD device structure + * @dat: page data + * @read_ecc: ecc read from nand flash + * @calc_ecc: ecc read from HW ECC registers + * + * Check the read ecc vector from OOB area to see the page is flashed. + * If flashed, check any error reported by checking calculated ecc vector. + * For non error page, calculated ecc will be zero. For error pages, + * a non-zero valid syndrome polynomial reported in calculated ecc vector. + * Pass this non-zero syndrome polynomial to 'elm_decode_bch_error_page' + * with elm error vector updated for error reported sectors. + * On returning from this function, elm error vector updated with + * - number of correctable errors, error location if correctable. + * - if pages are non-correctable, updated with elm error vector + * error uncorrectable. + */ +static int omap_elm_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + int eccsteps = info->nand.ecc.steps; + int i , j, stat = 0; + int eccsize, eccflag, size; + struct elm_errorvec err_vec[ERROR_VECTOR_MAX]; + u_char *ecc_vec = calc_ecc; + enum bch_ecc type; + bool is_error_reported = false; + + /* initialize elm error vector to zero */ + memset(err_vec, 0, sizeof(err_vec)); + if (info->nand.ecc.strength == BCH8_MAX_ERROR) { + size = BCH8_SIZE; + eccsize = BCH8_ECC_OOB_BYTES; + type = BCH8_ECC; + } else { + size = BCH4_SIZE; + eccsize = BCH4_SIZE; + type = BCH4_ECC; + } + + for (i = 0; i < eccsteps ; i++) { + eccflag = 0; /* initialize eccflag */ + + for (j = 0; (j < eccsize); j++) { + if (read_ecc[j] != 0xFF) { + eccflag = 1; /* data area is flashed */ + break; + } + } + + /* check calculated ecc if data area is flashed */ + if (eccflag == 1) { + eccflag = 0; + /* + * check any error reported, in case of error + * non zero ecc reported. + */ + for (j = 0; (j < eccsize); j++) { + if (calc_ecc[j] != 0) { + /* non zero ecc, error present */ + eccflag = 1; + break; + } + } + } + + /* update elm error vector */ + if (eccflag == 1) { + err_vec[i].error_reported = true; + is_error_reported = true; + } + + /* update the ecc vector */ + calc_ecc = calc_ecc + size; + read_ecc = read_ecc + size; + } + + /* Check if any error reported */ + if (!is_error_reported) + return 0; + + /* decode BCH error using ELM module */ + elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec); + + for (i = 0; i < eccsteps; i++) { + if (err_vec[i].error_reported) { + for (j = 0; j < err_vec[i].error_count; j++) { + u32 bit_pos, byte_pos, error_max, pos; + + if (type == BCH8_ECC) + error_max = BCH8_ECC_MAX; + else + error_max = BCH4_ECC_MAX; + + if (info->nand.ecc.strength == BCH8_MAX_ERROR) + pos = err_vec[i].error_loc[j]; + else + /* add 4 to take care 4 bit padding */ + pos = err_vec[i].error_loc[j] + + BCH4_BIT_PAD; + + /* calculate bit position of error */ + bit_pos = pos % 8; + /* calculate byte position of error */ + byte_pos = (error_max - pos - 1) / 8; + + if (pos < error_max) + dat[byte_pos] ^= 1 << bit_pos; + /* else, not interested to correct ecc */ + } + + /* update number of correctable errors */ + stat += err_vec[i].error_count; + } + + /* update page data with sector size */ + dat += info->nand.ecc.size; + } + + for (i = 0; i < eccsteps; i++) + /* return error if uncorrectable error present */ + if (err_vec[i].error_uncorrectable) + return -EINVAL; + + return stat; +} +#endif + /** * omap_calcuate_ecc - Generate non-inverted ECC bytes. * @mtd: MTD device structure @@ -1039,14 +1180,45 @@ static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode) nerrors = info->nand.ecc.strength; dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; +#ifdef CONFIG_MTD_NAND_OMAP_BCH + if (info->is_elm_used) { + /* + * Program GPMC to perform correction on (steps * 512) byte + * sector at a time. + */ + gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, + info->nand.ecc.steps, nerrors); + return; + } +#endif /* - * Program GPMC to perform correction on one 512-byte sector at a time. - * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and - * gives a slight (5%) performance gain (but requires additional code). + * Program GPMC to perform correction on one 512-byte sector at + * a time. */ - (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors); + (void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, + nerrors); } + +#ifdef CONFIG_MTD_NAND_OMAP_BCH +/** + * omap3_calculate_ecc_bch - Generate bytes of ECC bytes + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * support reading og BCH4/8 ecc vectors for the page + */ +static int omap3_calculate_ecc_bch(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, + mtd); + + return gpmc_calculate_ecc_bch(info->gpmc_cs, dat, ecc_code); +} +#endif + /** * omap3_calculate_ecc_bch4 - Generate 7 bytes of ECC bytes * @mtd: MTD device structure @@ -1121,6 +1293,90 @@ static void omap3_free_bch(struct mtd_info *mtd) } } +#ifdef CONFIG_MTD_NAND_OMAP_BCH +/** + * omap_write_page_bch - BCH ecc based write page function for entire page + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB + * + * Custom write page method evolved to support multi sector writing in one shot + */ +static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + int i; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint32_t *eccpos = chip->ecc.layout->eccpos; + + /* + * setting ecc vector with zero to support RBL compatibility. + * RBL requires 14 byte of ecc with 14 byte as zero + * even though BCH8 requires only 13 byte of ecc bytes. + */ + memset(ecc_calc, 0x0, chip->ecc.total); + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + chip->write_buf(mtd, buf, mtd->writesize); + chip->ecc.calculate(mtd, buf, &ecc_calc[0]); + + for (i = 0; i < chip->ecc.total; i++) + chip->oob_poi[eccpos[i]] = ecc_calc[i]; + + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + return 0; +} + +/** + * omap_read_page_bch - BCH ecc based page read function for entire page + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @oob_required: caller requires OOB data read to chip->oob_poi + * @page: page number to read + * + * For BCH ecc scheme, GPMC used for syndrome calculation and ELM module + * used for error correction. + * Custom method evolved to support ELM error correction. On reading page + * data area is read along with OOB data with ecc engine enabled. ecc vector + * updated after read of OOB data. For non error pages ecc vector reported as + * zero. + */ +static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *oob = &chip->oob_poi[eccpos[0]]; + uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0]; + int stat; + + /* enable GPMC ecc engine */ + chip->ecc.hwctl(mtd, NAND_ECC_READ); + /* read data */ + chip->read_buf(mtd, buf, mtd->writesize); + + /* read oob bytes */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1); + chip->read_buf(mtd, oob, chip->ecc.total); + + /* calculate ecc bytes */ + chip->ecc.calculate(mtd, buf, ecc_calc); + + memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total); + + stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc); + + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + + return 0; +} +#endif + /** * omap3_init_bch - Initialize BCH ECC * @mtd: MTD device structure @@ -1146,35 +1402,62 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt) goto fail; } - /* initialize GPMC BCH engine */ - ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors); - if (ret) - goto fail; - - /* software bch library is only used to detect and locate errors */ - info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */); - if (!info->bch) - goto fail; + info->nand.ecc.size = 512; + info->nand.ecc.hwctl = omap3_enable_hwecc_bch; + info->nand.ecc.mode = NAND_ECC_HW; + info->nand.ecc.strength = hw_errors; - info->nand.ecc.size = 512; - info->nand.ecc.hwctl = omap3_enable_hwecc_bch; - info->nand.ecc.correct = omap3_correct_data_bch; - info->nand.ecc.mode = NAND_ECC_HW; + if (info->is_elm_used && (mtd->writesize <= 4096)) { + enum bch_ecc bch_type; - /* - * The number of corrected errors in an ecc block that will trigger - * block scrubbing defaults to the ecc strength (4 or 8). - * Set mtd->bitflip_threshold here to define a custom threshold. - */ + if (hw_errors == BCH8_MAX_ERROR) { + bch_type = BCH8_ECC; + info->nand.ecc.bytes = BCH8_SIZE; + } else { + bch_type = BCH4_ECC; + info->nand.ecc.bytes = BCH4_SIZE; + } - if (max_errors == 8) { - info->nand.ecc.strength = 8; - info->nand.ecc.bytes = 13; - info->nand.ecc.calculate = omap3_calculate_ecc_bch8; + info->nand.ecc.correct = omap_elm_correct_data; + info->nand.ecc.calculate = omap3_calculate_ecc_bch; + info->nand.ecc.read_page = omap_read_page_bch; + info->nand.ecc.write_page = omap_write_page_bch; + info->elm_dev = elm_request(bch_type); + if (!info->elm_dev) { + pr_err("Request to elm module failed\n"); + goto fail; + } } else { - info->nand.ecc.strength = 4; - info->nand.ecc.bytes = 7; - info->nand.ecc.calculate = omap3_calculate_ecc_bch4; + + /* initialize GPMC BCH engine */ + ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors); + if (ret) + goto fail; + + /* + * software bch library is only used to detect and + * locateerrors + */ + info->bch = init_bch(13, max_errors, + 0x201b /* hw polynomial */); + if (!info->bch) + goto fail; + + info->nand.ecc.correct = omap3_correct_data_bch; + + /* + * The number of corrected errors in an ecc block that will + * trigger block scrubbing defaults to the ecc strength (4 or 8) + * Set mtd->bitflip_threshold here to define a custom threshold. + */ + + if (max_errors == 8) { + info->nand.ecc.bytes = 13; + info->nand.ecc.calculate = omap3_calculate_ecc_bch8; + } else { + info->nand.ecc.bytes = 7; + info->nand.ecc.calculate = omap3_calculate_ecc_bch4; + } } pr_info("enabling NAND BCH ecc with %d-bit correction\n", max_errors); @@ -1190,7 +1473,7 @@ fail: */ static int omap3_init_bch_tail(struct mtd_info *mtd) { - int i, steps; + int i, steps, offset; struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, mtd); struct nand_ecclayout *layout = &info->ecclayout; @@ -1212,11 +1495,20 @@ static int omap3_init_bch_tail(struct mtd_info *mtd) goto fail; } + /* ECC layout compatible with RBL for BCH8 */ + if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) + offset = 2; + else + offset = mtd->oobsize - layout->eccbytes; /* put ecc bytes at oob tail */ for (i = 0; i < layout->eccbytes; i++) - layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i; + layout->eccpos[i] = offset + i; + + if (info->is_elm_used && (info->nand.ecc.bytes == BCH8_SIZE)) + layout->oobfree[0].offset = 2 + layout->eccbytes * steps; + else + layout->oobfree[0].offset = 2; - layout->oobfree[0].offset = 2; layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes; info->nand.ecc.layout = layout; @@ -1279,6 +1571,9 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->nand.options = pdata->devsize; info->nand.options |= NAND_SKIP_BBTSCAN; +#ifdef CONFIG_MTD_NAND_OMAP_BCH + info->is_elm_used = pdata->is_elm_used; +#endif res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 1a68c1e..5b7054e 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -28,6 +28,7 @@ struct omap_nand_platform_data { int devsize; enum omap_ecc ecc_opt; struct gpmc_nand_regs reg; + bool is_elm_used; }; /* minimum size for IO mapping */