diff mbox

[2/2] mtd: delete nomadik_nand driver

Message ID 1349335729-13438-1-git-send-email-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij Oct. 4, 2012, 7:28 a.m. UTC
The nomadik_nand driver is really just a subset of the FSMC
NAND driver, and there are no users anymore so let's delete
it.

Cc: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
I'm seeking the MTD maintainer(s) ACK for this patch so I can
merge it through the ARM SoC tree just after switching the
platform to using the FSMC driver.
---
 drivers/mtd/nand/Kconfig                       |   6 -
 drivers/mtd/nand/Makefile                      |   1 -
 drivers/mtd/nand/nomadik_nand.c                | 235 -------------------------
 include/linux/platform_data/mtd-nomadik-nand.h |  16 --
 4 files changed, 258 deletions(-)
 delete mode 100644 drivers/mtd/nand/nomadik_nand.c
 delete mode 100644 include/linux/platform_data/mtd-nomadik-nand.h

Comments

Jean-Christophe PLAGNIOL-VILLARD Oct. 7, 2012, 7:49 p.m. UTC | #1
On 09:28 Thu 04 Oct     , Linus Walleij wrote:
> The nomadik_nand driver is really just a subset of the FSMC
> NAND driver, and there are no users anymore so let's delete
> it.
> 
> Cc: Alessandro Rubini <rubini@unipv.it>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> I'm seeking the MTD maintainer(s) ACK for this patch so I can
> merge it through the ARM SoC tree just after switching the
> platform to using the FSMC driver.
I've test the fsmc driver on nomadik too

Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Best Regards,
J.
diff mbox

Patch

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 598cd0a..ec4acae 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -515,12 +515,6 @@  config MTD_NAND_MXC
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.
 
-config MTD_NAND_NOMADIK
-	tristate "ST Nomadik 8815 NAND support"
-	depends on ARCH_NOMADIK
-	help
-	  Driver for the NAND flash controller on the Nomadik, with ECC.
-
 config MTD_NAND_SH_FLCTL
 	tristate "Support for NAND on Renesas SuperH FLCTL"
 	depends on SUPERH || ARCH_SHMOBILE
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d4b4d87..4d4e33a 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -45,7 +45,6 @@  obj-$(CONFIG_MTD_NAND_MXC)		+= mxc_nand.o
 obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socrates_nand.o
 obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
 obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
-obj-$(CONFIG_MTD_NAND_NOMADIK)		+= nomadik_nand.o
 obj-$(CONFIG_MTD_NAND_BCM_UMI)		+= bcm_umi_nand.o nand_bcm_umi.o
 obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
 obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
deleted file mode 100644
index 9ee0c4e..0000000
--- a/drivers/mtd/nand/nomadik_nand.c
+++ /dev/null
@@ -1,235 +0,0 @@ 
-/*
- *  drivers/mtd/nand/nomadik_nand.c
- *
- *  Overview:
- *  	Driver for on-board NAND flash on Nomadik Platforms
- *
- * Copyright © 2007 STMicroelectronics Pvt. Ltd.
- * Author: Sachin Verma <sachin.verma@st.com>
- *
- * Copyright © 2009 Alessandro Rubini
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
-#include <mach/fsmc.h>
-
-#include <mtd/mtd-abi.h>
-
-struct nomadik_nand_host {
-	struct mtd_info		mtd;
-	struct nand_chip	nand;
-	void __iomem *data_va;
-	void __iomem *cmd_va;
-	void __iomem *addr_va;
-	struct nand_bbt_descr *bbt_desc;
-};
-
-static struct nand_ecclayout nomadik_ecc_layout = {
-	.eccbytes = 3 * 4,
-	.eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
-		0x02, 0x03, 0x04,
-		0x12, 0x13, 0x14,
-		0x22, 0x23, 0x24,
-		0x32, 0x33, 0x34},
-	/* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
-	.oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
-};
-
-static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
-{
-	/* No need to enable hw ecc, it's on by default */
-}
-
-static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *nand = mtd->priv;
-	struct nomadik_nand_host *host = nand->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, host->cmd_va);
-	else
-		writeb(cmd, host->addr_va);
-}
-
-static int nomadik_nand_probe(struct platform_device *pdev)
-{
-	struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
-	struct nomadik_nand_host *host;
-	struct mtd_info *mtd;
-	struct nand_chip *nand;
-	struct resource *res;
-	int ret = 0;
-
-	/* Allocate memory for the device structure (and zero it) */
-	host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
-	if (!host) {
-		dev_err(&pdev->dev, "Failed to allocate device structure.\n");
-		return -ENOMEM;
-	}
-
-	/* Call the client's init function, if any */
-	if (pdata->init)
-		ret = pdata->init();
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Init function failed\n");
-		goto err;
-	}
-
-	/* ioremap three regions */
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
-	if (!res) {
-		ret = -EIO;
-		goto err_unmap;
-	}
-	host->addr_va = ioremap(res->start, resource_size(res));
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
-	if (!res) {
-		ret = -EIO;
-		goto err_unmap;
-	}
-	host->data_va = ioremap(res->start, resource_size(res));
-
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
-	if (!res) {
-		ret = -EIO;
-		goto err_unmap;
-	}
-	host->cmd_va = ioremap(res->start, resource_size(res));
-
-	if (!host->addr_va || !host->data_va || !host->cmd_va) {
-		ret = -ENOMEM;
-		goto err_unmap;
-	}
-
-	/* Link all private pointers */
-	mtd = &host->mtd;
-	nand = &host->nand;
-	mtd->priv = nand;
-	nand->priv = host;
-
-	host->mtd.owner = THIS_MODULE;
-	nand->IO_ADDR_R = host->data_va;
-	nand->IO_ADDR_W = host->data_va;
-	nand->cmd_ctrl = nomadik_cmd_ctrl;
-
-	/*
-	 * This stanza declares ECC_HW but uses soft routines. It's because
-	 * HW claims to make the calculation but not the correction. However,
-	 * I haven't managed to get the desired data out of it until now.
-	 */
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->ecc.layout = &nomadik_ecc_layout;
-	nand->ecc.hwctl = nomadik_ecc_control;
-	nand->ecc.size = 512;
-	nand->ecc.bytes = 3;
-
-	nand->options = pdata->options;
-
-	/*
-	 * Scan to find existence of the device
-	 */
-	if (nand_scan(&host->mtd, 1)) {
-		ret = -ENXIO;
-		goto err_unmap;
-	}
-
-	mtd_device_register(&host->mtd, pdata->parts, pdata->nparts);
-
-	platform_set_drvdata(pdev, host);
-	return 0;
-
- err_unmap:
-	if (host->cmd_va)
-		iounmap(host->cmd_va);
-	if (host->data_va)
-		iounmap(host->data_va);
-	if (host->addr_va)
-		iounmap(host->addr_va);
- err:
-	kfree(host);
-	return ret;
-}
-
-/*
- * Clean up routine
- */
-static int nomadik_nand_remove(struct platform_device *pdev)
-{
-	struct nomadik_nand_host *host = platform_get_drvdata(pdev);
-	struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
-
-	if (pdata->exit)
-		pdata->exit();
-
-	if (host) {
-		nand_release(&host->mtd);
-		iounmap(host->cmd_va);
-		iounmap(host->data_va);
-		iounmap(host->addr_va);
-		kfree(host);
-	}
-	return 0;
-}
-
-static int nomadik_nand_suspend(struct device *dev)
-{
-	struct nomadik_nand_host *host = dev_get_drvdata(dev);
-	int ret = 0;
-	if (host)
-		ret = mtd_suspend(&host->mtd);
-	return ret;
-}
-
-static int nomadik_nand_resume(struct device *dev)
-{
-	struct nomadik_nand_host *host = dev_get_drvdata(dev);
-	if (host)
-		mtd_resume(&host->mtd);
-	return 0;
-}
-
-static const struct dev_pm_ops nomadik_nand_pm_ops = {
-	.suspend = nomadik_nand_suspend,
-	.resume = nomadik_nand_resume,
-};
-
-static struct platform_driver nomadik_nand_driver = {
-	.probe = nomadik_nand_probe,
-	.remove = nomadik_nand_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "nomadik_nand",
-		.pm = &nomadik_nand_pm_ops,
-	},
-};
-
-module_platform_driver(nomadik_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
-MODULE_DESCRIPTION("NAND driver for Nomadik Platform");
diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h
deleted file mode 100644
index c3c8254..0000000
--- a/include/linux/platform_data/mtd-nomadik-nand.h
+++ /dev/null
@@ -1,16 +0,0 @@ 
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-struct nomadik_nand_platform_data {
-	struct mtd_partition *parts;
-	int nparts;
-	int options;
-	int (*init) (void);
-	int (*exit) (void);
-};
-
-#define NAND_IO_DATA	0x40000000
-#define NAND_IO_CMD	0x40800000
-#define NAND_IO_ADDR	0x41000000
-
-#endif				/* __ASM_ARCH_NAND_H */