@@ -753,6 +753,32 @@ static struct omap_board_mux board_mux[] __initdata = {
/* NIRQ2 for twl6040 */
OMAP4_MUX(SYS_NIRQ2, OMAP_MUX_MODE0 |
OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
+ /* GPIO_127 for twl6040 */
+ OMAP4_MUX(HDQ_SIO, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ /* McPDM */
+ OMAP4_MUX(ABE_PDM_UL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_DL_DATA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_PDM_FRAME, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(ABE_PDM_LB_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_CLKS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ /* DMIC */
+ OMAP4_MUX(ABE_DMIC_CLK1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+ OMAP4_MUX(ABE_DMIC_DIN1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_DMIC_DIN2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_DMIC_DIN3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* McBSP1 */
+ OMAP4_MUX(ABE_MCBSP1_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP1_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP1_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ /* McBSP2 */
+ OMAP4_MUX(ABE_MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+ OMAP4_MUX(ABE_MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+ OMAP4_MUX(ABE_MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT |
+ OMAP_PULL_ENA),
+ OMAP4_MUX(ABE_MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
u-boot stopped configuring 'non essential' pins recently. These pins are essential for audio and need to be done to have working audio on the board. Pin Mux configuration for: twl6040 audpwron gpio, McPDM, DMIC, McBSP1 and McBSP2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/mach-omap2/board-4430sdp.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)