@@ -7,9 +7,13 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
+Optional properties:
+- timeout-sec: Contains the watchdog timeout in seconds
+
Example:
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
+ timeout-sec = <10>;
};
@@ -5,10 +5,15 @@ Required Properties:
- Compatibility : "marvell,orion-wdt"
- reg : Address of the timer registers
+Optional properties:
+
+- timeout-sec : Contains the watchdog timeout in seconds
+
Example:
wdt@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
+ timeout-sec = <10>;
status = "okay";
};
@@ -5,9 +5,13 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
+Optional properties:
+- timeout-sec: Contains the watchdog timeout in seconds
+
Example:
watchdog@4003C000 {
compatible = "nxp,pnx4008-wdt";
reg = <0x4003C000 0x1000>;
+ timeout-sec = <10>;
};
@@ -114,6 +114,7 @@ config AT91RM9200_WATCHDOG
config AT91SAM9X_WATCHDOG
tristate "AT91SAM9X / AT91CAP9 watchdog"
depends on ARCH_AT91 && !ARCH_AT91RM9200
+ select WATCHDOG_CORE
help
Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
reboot your system when the timeout is reached.
@@ -32,7 +32,6 @@
#include <linux/timer.h>
#include <linux/bitops.h>
#include <linux/uaccess.h>
-#include <linux/of.h>
#include "at91sam9_wdt.h"
@@ -57,8 +56,10 @@
#define WDT_TIMEOUT (HZ/2)
/* User land timeout */
+#define MIN_HEARTBEAT 1
+#define MAX_HEARTBEAT 16
#define WDT_HEARTBEAT 15
-static int heartbeat = WDT_HEARTBEAT;
+static int heartbeat = 0;
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
@@ -255,6 +256,12 @@ static struct miscdevice at91wdt_miscdev = {
.fops = &at91wdt_fops,
};
+static struct watchdog_device at91wdt_wdd __initdata = {
+ .timeout = WDT_HEARTBEAT,
+ .min_timeout = MIN_HEARTBEAT,
+ .max_timeout = MAX_HEARTBEAT,
+};
+
static int __init at91wdt_probe(struct platform_device *pdev)
{
struct resource *r;
@@ -273,6 +280,8 @@ static int __init at91wdt_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ watchdog_init_timeout(&at91wdt_wdd, heartbeat, pdev->dev.of_node);
+
/* Set watchdog */
res = at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000));
if (res)
@@ -282,12 +291,12 @@ static int __init at91wdt_probe(struct platform_device *pdev)
if (res)
return res;
- at91wdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+ at91wdt_private.next_heartbeat = jiffies + at91wdt_wdd.timeout * HZ;
setup_timer(&at91wdt_private.timer, at91_ping, 0);
mod_timer(&at91wdt_private.timer, jiffies + WDT_TIMEOUT);
pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n",
- heartbeat, nowayout);
+ at91wdt_wdd.timeout, nowayout);
return 0;
}
@@ -24,7 +24,6 @@
#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
-#include <linux/of.h>
#include <mach/bridge-regs.h>
/*
@@ -162,12 +161,10 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
- if ((heartbeat < 1) || (heartbeat > wdt_max_duration))
- heartbeat = wdt_max_duration;
-
- orion_wdt.timeout = heartbeat;
orion_wdt.min_timeout = 1;
orion_wdt.max_timeout = wdt_max_duration;
+ orion_wdt.timeout = wdt_max_duration;
+ watchdog_init_timeout(&orion_wdt, heartbeat, pdev->dev.of_node);
watchdog_set_nowayout(&orion_wdt, nowayout);
ret = watchdog_register_device(&orion_wdt);
@@ -177,7 +174,7 @@ static int __devinit orion_wdt_probe(struct platform_device *pdev)
}
pr_info("Initial timeout %d sec%s\n",
- heartbeat, nowayout ? ", nowayout" : "");
+ orion_wdt.timeout, nowayout ? ", nowayout" : "");
return 0;
}
@@ -142,6 +142,7 @@ static const struct watchdog_ops pnx4008_wdt_ops = {
static struct watchdog_device pnx4008_wdd = {
.info = &pnx4008_wdt_ident,
.ops = &pnx4008_wdt_ops,
+ .timeout = DEFAULT_HEARTBEAT,
.min_timeout = 1,
.max_timeout = MAX_HEARTBEAT,
};
@@ -151,8 +152,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
struct resource *r;
int ret = 0;
- if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
- heartbeat = DEFAULT_HEARTBEAT;
+ watchdog_init_timeout(&pnx4008_wdd, heartbeat, pdev->dev.of_node);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
wdt_base = devm_request_and_ioremap(&pdev->dev, r);
@@ -167,7 +167,6 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
if (ret)
goto out;
- pnx4008_wdd.timeout = heartbeat;
pnx4008_wdd.bootstatus = (readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
WDIOF_CARDRESET : 0;
watchdog_set_nowayout(&pnx4008_wdd, nowayout);
@@ -181,7 +180,7 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
}
dev_info(&pdev->dev, "PNX4008 Watchdog Timer: heartbeat %d sec\n",
- heartbeat);
+ pnx4008_wdd.timeout);
return 0;
The binding is provided by the watchdog core. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> --- .../devicetree/bindings/watchdog/atmel-wdt.txt | 4 ++++ Documentation/devicetree/bindings/watchdog/marvel.txt | 5 +++++ .../devicetree/bindings/watchdog/pnx4008-wdt.txt | 4 ++++ drivers/watchdog/Kconfig | 1 + drivers/watchdog/at91sam9_wdt.c | 17 +++++++++++++---- drivers/watchdog/orion_wdt.c | 9 +++------ drivers/watchdog/pnx4008_wdt.c | 7 +++---- 7 files changed, 33 insertions(+), 14 deletions(-)