diff mbox

ARM: tegra: cpuidle: replace LP3 with ARM_CPUIDLE_WFI_STATE

Message ID 1349691856-30590-1-git-send-email-josephl@nvidia.com (mailing list archive)
State New, archived
Headers show

Commit Message

Joseph Lo Oct. 8, 2012, 10:24 a.m. UTC
The Tegra CPU idle LP3 state is doing ARM WFI only. So it's same with
the common ARM_CPUIDLE_WFI_STATE. Using it to replace LP3 now.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
---
 arch/arm/mach-tegra/cpuidle.c |   44 ++--------------------------------------
 1 files changed, 3 insertions(+), 41 deletions(-)

Comments

Stephen Warren Oct. 8, 2012, 4:19 p.m. UTC | #1
On 10/08/2012 04:24 AM, Joseph Lo wrote:
> The Tegra CPU idle LP3 state is doing ARM WFI only. So it's same with
> the common ARM_CPUIDLE_WFI_STATE. Using it to replace LP3 now.

Hmm. This changes the exit_latency/target_residency fields of the
cpuidle state definition from 10 to 1, and also replaces
tegra_idle_enter_lp3() with just a dsb/wfi as far as I can tell. What
are the implications of removing the irq/fiq_disable/enable and
ktim-related code? It might be worth explaining why this change is valid
in the commit description.
Joseph Lo Oct. 9, 2012, 6:16 a.m. UTC | #2
Hi Stephen,

Thanks for your review.

On Tue, 2012-10-09 at 00:19 +0800, Stephen Warren wrote:
> On 10/08/2012 04:24 AM, Joseph Lo wrote:
> > The Tegra CPU idle LP3 state is doing ARM WFI only. So it's same with
> > the common ARM_CPUIDLE_WFI_STATE. Using it to replace LP3 now.
> 
> Hmm. This changes the exit_latency/target_residency fields of the
> cpuidle state definition from 10 to 1, and also replaces
> tegra_idle_enter_lp3() with just a dsb/wfi as far as I can tell. What
> are the implications of removing the irq/fiq_disable/enable and
> ktim-related code? It might be worth explaining why this change is valid
> in the commit description.
> --

There were some histories about the latency. The legacy LP3 mode called
to "tegra_cpu_wfi". This func was been removed. We called to
"cpu_do_idle" right now. In the old "tegra_cpu_wfi", we did back up the
current flow controller register and set up flow controller to CPU_WFE
state. It did wait for CPU running to WFI and clock gate it externally.
We need a time duration to make flow controller to do that.

When any event or interrupt been triggered, it resume the CPU clock. And
CPU runs after WFI and restore the flow controller. We found this may
hurt performance, so we drop that. The latency is not true anymore.

Now we just using WFI to enter low-power CPU standby state where most
clocks gated.

About the missing irq/fiq disable/enable call, we enable the
"en_core_tk_irqen" in this patch. That means we enable time keeping and
irq enabling in the core cpuidle code. So the cpuidle enter code will
use the "cpuidle_wrap_enter" in "drivers/cpuidle/cpuidle.c".

After merging these concepts, I think we can use the common
ARM_CPUIDLE_WFI_STATE to replace the current LP3 code.

Thanks,
Joseph
Stephen Warren Oct. 18, 2012, 8:26 p.m. UTC | #3
On 10/08/2012 04:24 AM, Joseph Lo wrote:
> The Tegra CPU idle LP3 state is doing ARM WFI only. So it's same with
> the common ARM_CPUIDLE_WFI_STATE. Using it to replace LP3 now.

Applied to Tegra's for-3.8/cpuidle branch (I created that branch in
anticipation of there being a bunch of other cpuidle work for 3.8).
diff mbox

Patch

diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
index 566e2f8..4e0b07c 100644
--- a/arch/arm/mach-tegra/cpuidle.c
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -23,60 +23,22 @@ 
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/cpu.h>
 #include <linux/cpuidle.h>
-#include <linux/hrtimer.h>
 
-#include <asm/proc-fns.h>
-
-#include <mach/iomap.h>
-
-static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv, int index);
+#include <asm/cpuidle.h>
 
 struct cpuidle_driver tegra_idle_driver = {
 	.name = "tegra_idle",
 	.owner = THIS_MODULE,
+	.en_core_tk_irqen = 1,
 	.state_count = 1,
 	.states = {
-		[0] = {
-			.enter			= tegra_idle_enter_lp3,
-			.exit_latency		= 10,
-			.target_residency	= 10,
-			.power_usage		= 600,
-			.flags			= CPUIDLE_FLAG_TIME_VALID,
-			.name			= "LP3",
-			.desc			= "CPU flow-controlled",
-		},
+		[0] = ARM_CPUIDLE_WFI_STATE_PWR(600),
 	},
 };
 
 static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
 
-static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
-	struct cpuidle_driver *drv, int index)
-{
-	ktime_t enter, exit;
-	s64 us;
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	enter = ktime_get();
-
-	cpu_do_idle();
-
-	exit = ktime_sub(ktime_get(), enter);
-	us = ktime_to_us(exit);
-
-	local_fiq_enable();
-	local_irq_enable();
-
-	dev->last_residency = us;
-
-	return index;
-}
-
 static int __init tegra_cpuidle_init(void)
 {
 	int ret;