diff mbox

[v4] GPIO: Add support for GPIO on CLPS711X-target platform

Message ID 1349798756-24777-1-git-send-email-shc_work@mail.ru (mailing list archive)
State New, archived
Headers show

Commit Message

Alexander Shiyan Oct. 9, 2012, 4:05 p.m. UTC
The CLPS711X CPUs provide some GPIOs for use in the system. This
driver provides support for these via gpiolib. Due to platform
limitations, driver does not support interrupts, only inputs and
outputs.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/Kconfig                           |    1 +
 arch/arm/mach-clps711x/include/mach/gpio.h |   13 +++
 drivers/gpio/Kconfig                       |    4 +
 drivers/gpio/Makefile                      |    1 +
 drivers/gpio/gpio-clps711x.c               |  163 ++++++++++++++++++++++++++++
 5 files changed, 182 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-clps711x/include/mach/gpio.h
 create mode 100644 drivers/gpio/gpio-clps711x.c

Comments

Russell King - ARM Linux Oct. 9, 2012, 4:09 p.m. UTC | #1
On Tue, Oct 09, 2012 at 08:05:56PM +0400, Alexander Shiyan wrote:
> The CLPS711X CPUs provide some GPIOs for use in the system. This
> driver provides support for these via gpiolib. Due to platform
> limitations, driver does not support interrupts, only inputs and
> outputs.
> 
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

This is much better, thanks.  As it's going via someone elses tree:

Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

> ---
>  arch/arm/Kconfig                           |    1 +
>  arch/arm/mach-clps711x/include/mach/gpio.h |   13 +++
>  drivers/gpio/Kconfig                       |    4 +
>  drivers/gpio/Makefile                      |    1 +
>  drivers/gpio/gpio-clps711x.c               |  163 ++++++++++++++++++++++++++++
>  5 files changed, 182 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-clps711x/include/mach/gpio.h
>  create mode 100644 drivers/gpio/gpio-clps711x.c
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 2867a77..343b0c3 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -352,6 +352,7 @@ config ARCH_CLPS711X
>  	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
>  	select CPU_ARM720T
>  	select ARCH_USES_GETTIMEOFFSET
> +	select ARCH_REQUIRE_GPIOLIB
>  	select COMMON_CLK
>  	select CLKDEV_LOOKUP
>  	select NEED_MACH_MEMORY_H
> diff --git a/arch/arm/mach-clps711x/include/mach/gpio.h b/arch/arm/mach-clps711x/include/mach/gpio.h
> new file mode 100644
> index 0000000..8ac6889
> --- /dev/null
> +++ b/arch/arm/mach-clps711x/include/mach/gpio.h
> @@ -0,0 +1,13 @@
> +/*
> + *  This file contains the CLPS711X GPIO definitions.
> + *
> + *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/* Simple helper for convert port & pin to GPIO number */
> +#define CLPS711X_GPIO(port, bit)	((port) * 8 + (bit))
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index d055cee..fb76140 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -91,6 +91,10 @@ config GPIO_MAX730X
>  
>  comment "Memory mapped GPIO drivers:"
>  
> +config GPIO_CLPS711X
> +	def_bool y
> +	depends on ARCH_CLPS711X
> +
>  config GPIO_GENERIC_PLATFORM
>  	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
>  	select GPIO_GENERIC
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 9aeed67..a28725e 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
>  obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
>  obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
>  obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
> +obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
>  obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
>  obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
>  obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
> diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
> new file mode 100644
> index 0000000..ea21822
> --- /dev/null
> +++ b/drivers/gpio/gpio-clps711x.c
> @@ -0,0 +1,163 @@
> +/*
> + *  CLPS711X GPIO driver
> + *
> + *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/gpio.h>
> +#include <linux/module.h>
> +#include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> +
> +#include <mach/hardware.h>
> +
> +#define CLPS711X_GPIO_PORTS	5
> +#define CLPS711X_GPIO_NAME	"gpio-clps711x"
> +
> +struct clps711x_gpio {
> +	struct gpio_chip	chip[CLPS711X_GPIO_PORTS];
> +	spinlock_t		lock;
> +};
> +
> +static void __iomem *clps711x_ports[] = {
> +	CLPS711X_VIRT_BASE + PADR,
> +	CLPS711X_VIRT_BASE + PBDR,
> +	CLPS711X_VIRT_BASE + PCDR,
> +	CLPS711X_VIRT_BASE + PDDR,
> +	CLPS711X_VIRT_BASE + PEDR,
> +};
> +
> +static void __iomem *clps711x_pdirs[] = {
> +	CLPS711X_VIRT_BASE + PADDR,
> +	CLPS711X_VIRT_BASE + PBDDR,
> +	CLPS711X_VIRT_BASE + PCDDR,
> +	CLPS711X_VIRT_BASE + PDDDR,
> +	CLPS711X_VIRT_BASE + PEDDR,
> +};
> +
> +#define clps711x_port(x)	clps711x_ports[x->base / 8]
> +#define clps711x_pdir(x)	clps711x_pdirs[x->base / 8]
> +
> +static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
> +{
> +	return !!readb(clps711x_port(chip)) & (1 << offset);
> +}
> +
> +static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
> +			      int value)
> +{
> +	int tmp;
> +	unsigned long flags;
> +	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
> +
> +	spin_lock_irqsave(&gpio->lock, flags);
> +	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
> +	if (value)
> +		tmp |= 1 << offset;
> +	writeb(tmp, clps711x_port(chip));
> +	spin_unlock_irqrestore(&gpio->lock, flags);
> +}
> +
> +static int gpio_clps711x_direction_in(struct gpio_chip *chip, unsigned offset)
> +{
> +	int tmp;
> +	unsigned long flags;
> +	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
> +
> +	spin_lock_irqsave(&gpio->lock, flags);
> +	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
> +	writeb(tmp, clps711x_pdir(chip));
> +	spin_unlock_irqrestore(&gpio->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int gpio_clps711x_direction_out(struct gpio_chip *chip, unsigned offset,
> +				       int value)
> +{
> +	int tmp;
> +	unsigned long flags;
> +	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
> +
> +	spin_lock_irqsave(&gpio->lock, flags);
> +	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
> +	writeb(tmp, clps711x_pdir(chip));
> +	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
> +	if (value)
> +		tmp |= 1 << offset;
> +	writeb(tmp, clps711x_port(chip));
> +	spin_unlock_irqrestore(&gpio->lock, flags);
> +
> +	return 0;
> +}
> +
> +struct clps711x_gpio_port {
> +	char	*name;
> +	int	nr;
> +};
> +
> +static const struct clps711x_gpio_port clps711x_gpio_ports[] __initconst = {
> +	{ "PORTA", 8, },
> +	{ "PORTB", 8, },
> +	{ "PORTC", 8, },
> +	{ "PORTD", 8, },
> +	{ "PORTE", 3, },
> +};
> +
> +static int __init gpio_clps711x_init(void)
> +{
> +	int i;
> +	struct platform_device *pdev;
> +	struct clps711x_gpio *gpio;
> +
> +	pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
> +	if (!pdev) {
> +		pr_err("Cannot create platform device: %s\n",
> +		       CLPS711X_GPIO_NAME);
> +		return -ENOMEM;
> +	}
> +
> +	platform_device_add(pdev);
> +
> +	gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
> +			    GFP_KERNEL);
> +	if (!gpio) {
> +		dev_err(&pdev->dev, "GPIO allocating memory error\n");
> +		platform_device_del(pdev);
> +		platform_device_put(pdev);
> +		return -ENOMEM;
> +	}
> +
> +	platform_set_drvdata(pdev, gpio);
> +
> +	spin_lock_init(&gpio->lock);
> +
> +	for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
> +		gpio->chip[i].owner		= THIS_MODULE;
> +		gpio->chip[i].dev		= &pdev->dev;
> +		gpio->chip[i].label		= clps711x_gpio_ports[i].name;
> +		gpio->chip[i].base		= i * 8;
> +		gpio->chip[i].ngpio		= clps711x_gpio_ports[i].nr;
> +		gpio->chip[i].direction_input	= gpio_clps711x_direction_in;
> +		gpio->chip[i].get		= gpio_clps711x_get;
> +		gpio->chip[i].direction_output	= gpio_clps711x_direction_out;
> +		gpio->chip[i].set		= gpio_clps711x_set;
> +		WARN_ON(gpiochip_add(&gpio->chip[i]));
> +	}
> +
> +	dev_info(&pdev->dev, "GPIO driver initialized\n");
> +
> +	return 0;
> +}
> +arch_initcall(gpio_clps711x_init);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
> +MODULE_DESCRIPTION("CLPS711X GPIO driver");
> -- 
> 1.7.8.6
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Linus Walleij Oct. 12, 2012, 8:55 p.m. UTC | #2
On Tue, Oct 9, 2012 at 6:05 PM, Alexander Shiyan <shc_work@mail.ru> wrote:

> The CLPS711X CPUs provide some GPIOs for use in the system. This
> driver provides support for these via gpiolib. Due to platform
> limitations, driver does not support interrupts, only inputs and
> outputs.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Hey looking good:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Will you send this through the ARM SoC tree with other
CLPS711x changes, or should I take it into my GPIO tree?

Yours,
Linus Walleij
Alexander Shiyan Oct. 13, 2012, 4:44 a.m. UTC | #3
On Fri, 12 Oct 2012 22:55:52 +0200
Linus Walleij <linus.walleij@linaro.org> wrote:

> On Tue, Oct 9, 2012 at 6:05 PM, Alexander Shiyan <shc_work@mail.ru> wrote:
> > The CLPS711X CPUs provide some GPIOs for use in the system. This
> > driver provides support for these via gpiolib. Due to platform
> > limitations, driver does not support interrupts, only inputs and
> > outputs.
> >
> > Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> 
> Hey looking good:
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Will you send this through the ARM SoC tree with other
> CLPS711x changes, or should I take it into my GPIO tree?
Yes please, if it possible.
This is a standalone patch and it no depends on other series.
Linus Walleij Oct. 15, 2012, 7:26 p.m. UTC | #4
On Tue, Oct 9, 2012 at 6:05 PM, Alexander Shiyan <shc_work@mail.ru> wrote:

> The CLPS711X CPUs provide some GPIOs for use in the system. This
> driver provides support for these via gpiolib. Due to platform
> limitations, driver does not support interrupts, only inputs and
> outputs.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>

Applied with Russell's ACK.

Thanks!
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2867a77..343b0c3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -352,6 +352,7 @@  config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select CPU_ARM720T
 	select ARCH_USES_GETTIMEOFFSET
+	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select NEED_MACH_MEMORY_H
diff --git a/arch/arm/mach-clps711x/include/mach/gpio.h b/arch/arm/mach-clps711x/include/mach/gpio.h
new file mode 100644
index 0000000..8ac6889
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/gpio.h
@@ -0,0 +1,13 @@ 
+/*
+ *  This file contains the CLPS711X GPIO definitions.
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/* Simple helper for convert port & pin to GPIO number */
+#define CLPS711X_GPIO(port, bit)	((port) * 8 + (bit))
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d055cee..fb76140 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -91,6 +91,10 @@  config GPIO_MAX730X
 
 comment "Memory mapped GPIO drivers:"
 
+config GPIO_CLPS711X
+	def_bool y
+	depends on ARCH_CLPS711X
+
 config GPIO_GENERIC_PLATFORM
 	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
 	select GPIO_GENERIC
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9aeed67..a28725e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,6 +16,7 @@  obj-$(CONFIG_GPIO_ADP5588)	+= gpio-adp5588.o
 obj-$(CONFIG_GPIO_AMD8111)	+= gpio-amd8111.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
+obj-$(CONFIG_GPIO_CLPS711X)	+= gpio-clps711x.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
 obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
diff --git a/drivers/gpio/gpio-clps711x.c b/drivers/gpio/gpio-clps711x.c
new file mode 100644
index 0000000..ea21822
--- /dev/null
+++ b/drivers/gpio/gpio-clps711x.c
@@ -0,0 +1,163 @@ 
+/*
+ *  CLPS711X GPIO driver
+ *
+ *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+
+#define CLPS711X_GPIO_PORTS	5
+#define CLPS711X_GPIO_NAME	"gpio-clps711x"
+
+struct clps711x_gpio {
+	struct gpio_chip	chip[CLPS711X_GPIO_PORTS];
+	spinlock_t		lock;
+};
+
+static void __iomem *clps711x_ports[] = {
+	CLPS711X_VIRT_BASE + PADR,
+	CLPS711X_VIRT_BASE + PBDR,
+	CLPS711X_VIRT_BASE + PCDR,
+	CLPS711X_VIRT_BASE + PDDR,
+	CLPS711X_VIRT_BASE + PEDR,
+};
+
+static void __iomem *clps711x_pdirs[] = {
+	CLPS711X_VIRT_BASE + PADDR,
+	CLPS711X_VIRT_BASE + PBDDR,
+	CLPS711X_VIRT_BASE + PCDDR,
+	CLPS711X_VIRT_BASE + PDDDR,
+	CLPS711X_VIRT_BASE + PEDDR,
+};
+
+#define clps711x_port(x)	clps711x_ports[x->base / 8]
+#define clps711x_pdir(x)	clps711x_pdirs[x->base / 8]
+
+static int gpio_clps711x_get(struct gpio_chip *chip, unsigned offset)
+{
+	return !!readb(clps711x_port(chip)) & (1 << offset);
+}
+
+static void gpio_clps711x_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+	if (value)
+		tmp |= 1 << offset;
+	writeb(tmp, clps711x_port(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+}
+
+static int gpio_clps711x_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_pdir(chip)) & ~(1 << offset);
+	writeb(tmp, clps711x_pdir(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int gpio_clps711x_direction_out(struct gpio_chip *chip, unsigned offset,
+				       int value)
+{
+	int tmp;
+	unsigned long flags;
+	struct clps711x_gpio *gpio = dev_get_drvdata(chip->dev);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	tmp = readb(clps711x_pdir(chip)) | (1 << offset);
+	writeb(tmp, clps711x_pdir(chip));
+	tmp = readb(clps711x_port(chip)) & ~(1 << offset);
+	if (value)
+		tmp |= 1 << offset;
+	writeb(tmp, clps711x_port(chip));
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+struct clps711x_gpio_port {
+	char	*name;
+	int	nr;
+};
+
+static const struct clps711x_gpio_port clps711x_gpio_ports[] __initconst = {
+	{ "PORTA", 8, },
+	{ "PORTB", 8, },
+	{ "PORTC", 8, },
+	{ "PORTD", 8, },
+	{ "PORTE", 3, },
+};
+
+static int __init gpio_clps711x_init(void)
+{
+	int i;
+	struct platform_device *pdev;
+	struct clps711x_gpio *gpio;
+
+	pdev = platform_device_alloc(CLPS711X_GPIO_NAME, 0);
+	if (!pdev) {
+		pr_err("Cannot create platform device: %s\n",
+		       CLPS711X_GPIO_NAME);
+		return -ENOMEM;
+	}
+
+	platform_device_add(pdev);
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_gpio),
+			    GFP_KERNEL);
+	if (!gpio) {
+		dev_err(&pdev->dev, "GPIO allocating memory error\n");
+		platform_device_del(pdev);
+		platform_device_put(pdev);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
+	spin_lock_init(&gpio->lock);
+
+	for (i = 0; i < CLPS711X_GPIO_PORTS; i++) {
+		gpio->chip[i].owner		= THIS_MODULE;
+		gpio->chip[i].dev		= &pdev->dev;
+		gpio->chip[i].label		= clps711x_gpio_ports[i].name;
+		gpio->chip[i].base		= i * 8;
+		gpio->chip[i].ngpio		= clps711x_gpio_ports[i].nr;
+		gpio->chip[i].direction_input	= gpio_clps711x_direction_in;
+		gpio->chip[i].get		= gpio_clps711x_get;
+		gpio->chip[i].direction_output	= gpio_clps711x_direction_out;
+		gpio->chip[i].set		= gpio_clps711x_set;
+		WARN_ON(gpiochip_add(&gpio->chip[i]));
+	}
+
+	dev_info(&pdev->dev, "GPIO driver initialized\n");
+
+	return 0;
+}
+arch_initcall(gpio_clps711x_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("CLPS711X GPIO driver");