diff mbox

ARM: dts: mxs: add the `clock-names` for gpmi-nand

Message ID 1349849740-14090-1-git-send-email-b32955@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Huang Shijie Oct. 10, 2012, 6:15 a.m. UTC
The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand.
So the gpmi-nand driver could not find the proper clock.

This patch fixes this issue.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 arch/arm/boot/dts/imx23.dtsi |    1 +
 arch/arm/boot/dts/imx28.dtsi |    1 +
 2 files changed, 2 insertions(+), 0 deletions(-)

Comments

Marek Vasut Oct. 10, 2012, 10:37 a.m. UTC | #1
Dear Huang Shijie,

> The current DT nodes for mx23/mx28 miss the `clocks-names` item for
> gpmi-nand. So the gpmi-nand driver could not find the proper clock.
> 
> This patch fixes this issue.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>
[...]

One more rant: Can you discard that weird backtick in the patch subject? Maybe 
use '' ?

Best regards,
Marek Vasut
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 9ca4ca7..6d31aa3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -69,6 +69,7 @@ 
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";
 				clocks = <&clks 34>;
+				clock-names = "gpmi_io";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e16d631..55c57ea 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -85,6 +85,7 @@ 
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";
 				clocks = <&clks 50>;
+				clock-names = "gpmi_io";
 				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};