@@ -949,6 +949,8 @@ config ARCH_VT8500
select COMMON_CLK
select HAVE_CLK
select CLKDEV_LOOKUP
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
@@ -25,4 +25,7 @@ int __init vt8500_irq_init(struct device_node *node,
/* defined in drivers/clk/clk-vt8500.c */
void __init vtwm_clk_init(void __iomem *pmc_base);
+/* defined in irq.c */
+asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
+
#endif
deleted file mode 100644
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for VIA VT8500
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro get_irqnr_preamble, base, tmp
- @ physical 0xd8140000 is virtual 0xf8140000
- mov \base, #0xf8000000
- orr \base, \base, #0x00140000
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base]
- cmp \irqnr, #63 @ may be false positive, check interrupt status
- bne 1001f
- ldr \irqstat, [\base, #0x84]
- ands \irqstat, #0x80000000
- moveq \irqnr, #0
-1001:
- .endm
-
deleted file mode 100644
@@ -1,22 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/irqs.h
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/* This value is just to make the core happy, never used otherwise */
-#define NR_IRQS 128
@@ -36,7 +36,7 @@
#include <linux/of_address.h>
#include <asm/irq.h>
-
+#include <asm/exception.h>
#define VT8500_ICPC_IRQ 0x20
#define VT8500_ICPC_FIQ 0x24
@@ -66,30 +66,35 @@
#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
| VT8500_TRIGGER_FALLING)
-static int irq_cnt;
+/* vt8500 has 1 intc, wm8505 and wm8650 have 2 */
+#define VT8500_INTC_MAX 2
-struct vt8500_irq_priv {
- void __iomem *base;
+struct vt8500_irq_data {
+ void __iomem *base; /* IO Memory base address */
+ struct irq_domain *domain; /* Domain for this controller */
};
+/* Global variable for accessing io-mem addresses */
+static struct vt8500_irq_data intc[VT8500_INTC_MAX];
+static u32 active_cnt = 0;
+
static void vt8500_irq_mask(struct irq_data *d)
{
- struct vt8500_irq_priv *priv =
- (struct vt8500_irq_priv *)(d->domain->host_data);
+ struct vt8500_irq_data *priv =
+ (struct vt8500_irq_data *)(d->domain->host_data);
void __iomem *base = priv->base;
- u8 edge;
+ void __iomem *stat_reg = base + VT8500_ICIS + (d->hwirq < 32 ? 0 : 4);
+ u8 edge, dctr;
+ u32 status;
edge = readb(base + VT8500_ICDC + d->hwirq) & VT8500_EDGE;
if (edge) {
- void __iomem *stat_reg = base + VT8500_ICIS
- + (d->hwirq < 32 ? 0 : 4);
- unsigned status = readl(stat_reg);
+ status = readl(stat_reg);
status |= (1 << (d->hwirq & 0x1f));
writel(status, stat_reg);
} else {
- u8 dctr = readb(base + VT8500_ICDC + d->hwirq);
-
+ dctr = readb(base + VT8500_ICDC + d->hwirq);
dctr &= ~VT8500_INT_ENABLE;
writeb(dctr, base + VT8500_ICDC + d->hwirq);
}
@@ -97,8 +102,8 @@ static void vt8500_irq_mask(struct irq_data *d)
static void vt8500_irq_unmask(struct irq_data *d)
{
- struct vt8500_irq_priv *priv =
- (struct vt8500_irq_priv *)(d->domain->host_data);
+ struct vt8500_irq_data *priv =
+ (struct vt8500_irq_data *)(d->domain->host_data);
void __iomem *base = priv->base;
u8 dctr;
@@ -109,8 +114,8 @@ static void vt8500_irq_unmask(struct irq_data *d)
static int vt8500_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
- struct vt8500_irq_priv *priv =
- (struct vt8500_irq_priv *)(d->domain->host_data);
+ struct vt8500_irq_data *priv =
+ (struct vt8500_irq_data *)(d->domain->host_data);
void __iomem *base = priv->base;
u8 dctr;
@@ -148,17 +153,15 @@ static struct irq_chip vt8500_irq_chip = {
static void __init vt8500_init_irq_hw(void __iomem *base)
{
- unsigned int i;
+ u32 i;
/* Enable rotating priority for IRQ */
writel(ICPC_ROTATE, base + VT8500_ICPC_IRQ);
writel(0x00, base + VT8500_ICPC_FIQ);
- for (i = 0; i < 64; i++) {
- /* Disable all interrupts and route them to IRQ */
- writeb(VT8500_INT_DISABLE | ICDC_IRQ,
- base + VT8500_ICDC + i);
- }
+ /* Disable all interrupts and route them to IRQ */
+ for (i = 0; i < 64; i++)
+ writeb(VT8500_INT_DISABLE | ICDC_IRQ, base + VT8500_ICDC + i);
}
static int vt8500_irq_map(struct irq_domain *h, unsigned int virq,
@@ -175,33 +178,67 @@ static struct irq_domain_ops vt8500_irq_domain_ops = {
.xlate = irq_domain_xlate_onecell,
};
+asmlinkage void __exception_irq_entry vt8500_handle_irq(struct pt_regs *regs)
+{
+ u32 stat, i;
+ int irqnr, virq;
+ void __iomem *base;
+
+ /* Loop through each active controller */
+ for (i=0; i<active_cnt; i++) {
+ base = intc[i].base;
+ irqnr = readl_relaxed(base) & 0x3F;
+ /*
+ Highest Priority register default = 63, so check that this
+ is a real interrupt by checking the status register
+ */
+ if (irqnr == 63) {
+ stat = readl_relaxed(base + VT8500_ICIS + 4);
+ if (!(stat & BIT(31)))
+ continue;
+ }
+
+ virq = irq_find_mapping(intc[i].domain, irqnr);
+ handle_IRQ(virq, regs);
+ }
+}
+
int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
{
- struct irq_domain *vt8500_irq_domain;
- struct vt8500_irq_priv *priv;
int irq, i;
struct device_node *np = node;
- priv = kzalloc(sizeof(struct vt8500_irq_priv), GFP_KERNEL);
- priv->base = of_iomap(np, 0);
+ if (active_cnt == VT8500_INTC_MAX) {
+ pr_err("%s: Interrupt controllers > VT8500_INTC_MAX\n",
+ __func__);
+ goto out;
+ }
+
+ intc[active_cnt].base = of_iomap(np, 0);
+ intc[active_cnt].domain = irq_domain_add_linear(node, 64,
+ &vt8500_irq_domain_ops, &intc[active_cnt]);
- vt8500_irq_domain = irq_domain_add_legacy(node, 64, irq_cnt, 0,
- &vt8500_irq_domain_ops, priv);
- if (!vt8500_irq_domain)
- pr_err("%s: Unable to add wmt irq domain!\n", __func__);
+ if (!intc[active_cnt].base) {
+ pr_err("%s: Unable to map IO memory\n", __func__);
+ goto out;
+ }
+
+ if (!intc[active_cnt].domain) {
+ pr_err("%s: Unable to add irq domain!\n", __func__);
+ goto out;
+ }
- irq_set_default_host(vt8500_irq_domain);
+ vt8500_init_irq_hw(intc[active_cnt].base);
- vt8500_init_irq_hw(priv->base);
+ pr_info("vt8500-irq: Added interrupt controller\n");
- pr_info("Added IRQ Controller @ %x [virq_base = %d]\n",
- (u32)(priv->base), irq_cnt);
+ active_cnt++;
/* check if this is a slaved controller */
if (of_irq_count(np) != 0) {
/* check that we have the correct number of interrupts */
if (of_irq_count(np) != 8) {
- pr_err("%s: Incorrect IRQ map for slave controller\n",
+ pr_err("%s: Incorrect IRQ map for slaved controller\n",
__func__);
return -EINVAL;
}
@@ -213,9 +250,7 @@ int __init vt8500_irq_init(struct device_node *node, struct device_node *parent)
pr_info("vt8500-irq: Enabled slave->parent interrupts\n");
}
-
- irq_cnt += 64;
-
+out:
return 0;
}
@@ -194,5 +194,6 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
.timer = &vt8500_timer,
.init_machine = vt8500_init,
.restart = vt8500_restart,
+ .handle_irq = vt8500_handle_irq,
MACHINE_END
This patch converts arch-vt8500/irq.c to MULTI_IRQ_HANDLER and SPARSE_IRQ. IRQ domain is changed from legacy to linear. Also, remove legacy code in include/mach/entry-macro.S and include/mach/irq.h to prepare for multiplatform. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> --- arch/arm/Kconfig | 2 + arch/arm/mach-vt8500/common.h | 3 + arch/arm/mach-vt8500/include/mach/entry-macro.S | 26 ------ arch/arm/mach-vt8500/include/mach/irqs.h | 22 ----- arch/arm/mach-vt8500/irq.c | 111 +++++++++++++++-------- arch/arm/mach-vt8500/vt8500.c | 1 + 6 files changed, 79 insertions(+), 86 deletions(-) delete mode 100644 arch/arm/mach-vt8500/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-vt8500/include/mach/irqs.h