new file mode 100644
@@ -0,0 +1,218 @@
+/*
+ * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
+ * 2012 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on at91sam9260.dtsi
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91RM9200 family SoC";
+ compatible = "atmel,at91rm9200";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ tcb1 = &tcb1;
+ };
+ cpus {
+ cpu@0 {
+ compatible = "arm,arm920t";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x04000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <25 26 27 28 29 30 31>;
+ };
+
+ ramc0: ramc@ffffff00 {
+ compatible = "atmel,at91rm9200-sdramc";
+ reg = <0xffffff00 0x100>;
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ };
+
+ st: timer@fffffd00 {
+ compatible = "atmel,at91rm9200-st";
+ reg = <0xfffffd00 0x100>;
+ interrupts = <1 4 7>;
+ };
+
+ tcb0: timer@fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <17 4 0 18 4 0 19 4 0>;
+ };
+
+ tcb1: timer@fffa4000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa4000 0x100>;
+ interrupts = <20 4 0 21 4 0 22 4 0>;
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x100>;
+ interrupts = <2 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x100>;
+ interrupts = <3 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x100>;
+ interrupts = <4 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x100>;
+ interrupts = <5 4 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 4 7>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffc0000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffc0000 0x200>;
+ interrupts = <6 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial@fffc4000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffc4000 0x200>;
+ interrupts = <7 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial@fffc8000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffc8000 0x200>;
+ interrupts = <8 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial@fffcc000 {
+ compatible = "atmel,at91rm9200-usart";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <23 4 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usb1: gadget@fffb0000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffb0000 0x4000>;
+ interrupts = <11 4 2>;
+ status = "disabled";
+ };
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ nand-ecc-mode = "soft";
+ gpios = <&pioC 2 0
+ 0
+ &pioB 1 0
+ >;
+ status = "disabled";
+ };
+
+ usb0: ohci@00300000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00300000 0x100000>;
+ interrupts = <23 4 2>;
+ status = "disabled";
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 0 /* sda */
+ &pioA 24 0 /* scl */
+ >;
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
Signed-off-by: Joachim Eastwood <manabian@gmail.com> --- arch/arm/boot/dts/at91rm9200.dtsi | 218 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 218 insertions(+) create mode 100644 arch/arm/boot/dts/at91rm9200.dtsi