| Message ID | 1350566815-409-3-git-send-email-mporter@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/18/2012 6:56 PM, Matt Porter wrote: > Move mach-davinci/dma.c to common/edma.c so it can be used > by OMAP (specifically AM33xx) as well. This just moves the > private EDMA API but does not support OMAP. > > Signed-off-by: Matt Porter <mporter@ti.com> > --- > diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c > index 4c48a36..f45d591 100644 > --- a/arch/arm/mach-davinci/devices.c > +++ b/arch/arm/mach-davinci/devices.c > @@ -19,9 +19,10 @@ > #include <mach/irqs.h> > #include <mach/cputype.h> > #include <mach/mux.h> > -#include <mach/edma.h> > #include <linux/platform_data/mmc-davinci.h> > #include <mach/time.h> > +#include <linux/platform_data/edma.h> Can you please introduce a patch to clean this mixture of linux/ and mach/ includes? > + > > #include "davinci.h" > #include "clock.h" > @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = { > }, > /* DMA channels: RX, then TX */ > { > - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), > + .start = EDMA_CTLR_CHAN(0, 26), Instead of just replacing the event #defines with plain numbers, can you introduce a mach-davinci local edma.h which can then be included in the davinci platform files which refer to edma channel numbers? > diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig > index 7cd56ed..153fab8 100644 > --- a/arch/arm/plat-omap/Kconfig > +++ b/arch/arm/plat-omap/Kconfig > @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS > select OMAP_DM_TIMER > select PROC_DEVICETREE if PROC_FS > select SPARSE_IRQ > + select TI_PRIV_EDMA This hunk does not seem to belong to subject of this patch. > select USE_OF > help > "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" > diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h > new file mode 100644 > index 0000000..7396f0b3 > --- /dev/null > +++ b/include/linux/platform_data/edma.h > @@ -0,0 +1,198 @@ > +/* > + * TI DAVINCI dma definitions > + * > + * Copyright (C) 2006-2009 Texas Instruments. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > + * You should have received a copy of the GNU General Public License along > + * with this program; if not, write to the Free Software Foundation, Inc., > + * 675 Mass Ave, Cambridge, MA 02139, USA. This part can be dropped, I suppose ;-) Thanks, Sekhar
On Sun, Oct 28, 2012 at 01:47:09PM +0530, Sekhar Nori wrote: > On 10/18/2012 6:56 PM, Matt Porter wrote: > > Move mach-davinci/dma.c to common/edma.c so it can be used > > by OMAP (specifically AM33xx) as well. This just moves the > > private EDMA API but does not support OMAP. > > > > Signed-off-by: Matt Porter <mporter@ti.com> > > --- > > > diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c > > index 4c48a36..f45d591 100644 > > --- a/arch/arm/mach-davinci/devices.c > > +++ b/arch/arm/mach-davinci/devices.c > > @@ -19,9 +19,10 @@ > > #include <mach/irqs.h> > > #include <mach/cputype.h> > > #include <mach/mux.h> > > -#include <mach/edma.h> > > #include <linux/platform_data/mmc-davinci.h> > > #include <mach/time.h> > > +#include <linux/platform_data/edma.h> > > Can you please introduce a patch to clean this mixture of linux/ and > mach/ includes? Sure. > > > + > > > > #include "davinci.h" > > #include "clock.h" > > @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = { > > }, > > /* DMA channels: RX, then TX */ > > { > > - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), > > + .start = EDMA_CTLR_CHAN(0, 26), > > Instead of just replacing the event #defines with plain numbers, can you > introduce a mach-davinci local edma.h which can then be included in the > davinci platform files which refer to edma channel numbers? Yes. > > diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig > > index 7cd56ed..153fab8 100644 > > --- a/arch/arm/plat-omap/Kconfig > > +++ b/arch/arm/plat-omap/Kconfig > > @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS > > select OMAP_DM_TIMER > > select PROC_DEVICETREE if PROC_FS > > select SPARSE_IRQ > > + select TI_PRIV_EDMA > > This hunk does not seem to belong to subject of this patch. Yep, stray hunk..will move to the am335x enablement. > > select USE_OF > > help > > "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" > > > diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h > > new file mode 100644 > > index 0000000..7396f0b3 > > --- /dev/null > > +++ b/include/linux/platform_data/edma.h > > @@ -0,0 +1,198 @@ > > +/* > > + * TI DAVINCI dma definitions > > + * > > + * Copyright (C) 2006-2009 Texas Instruments. > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms of the GNU General Public License as published by the > > + * Free Software Foundation; either version 2 of the License, or (at your > > + * option) any later version. > > + * > > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED > > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF > > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN > > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, > > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF > > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON > > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF > > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > > > + * You should have received a copy of the GNU General Public License along > > + * with this program; if not, write to the Free Software Foundation, Inc., > > + * 675 Mass Ave, Cambridge, MA 02139, USA. > > This part can be dropped, I suppose ;-) Ok :) -Matt
On Sun, Oct 28, 2012 at 01:47:09PM +0530, Sekhar Nori wrote: > On 10/18/2012 6:56 PM, Matt Porter wrote: > > Move mach-davinci/dma.c to common/edma.c so it can be used > > by OMAP (specifically AM33xx) as well. This just moves the > > private EDMA API but does not support OMAP. > > > > Signed-off-by: Matt Porter <mporter@ti.com> > > --- > > > diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c > > index 4c48a36..f45d591 100644 > > --- a/arch/arm/mach-davinci/devices.c > > +++ b/arch/arm/mach-davinci/devices.c > > @@ -19,9 +19,10 @@ > > #include <mach/irqs.h> > > #include <mach/cputype.h> > > #include <mach/mux.h> > > -#include <mach/edma.h> > > #include <linux/platform_data/mmc-davinci.h> > > #include <mach/time.h> > > +#include <linux/platform_data/edma.h> > > Can you please introduce a patch to clean this mixture of linux/ and > mach/ includes? Yeah, are you ok with a follow on series to clean all these files? I don't want to make this series longer with something not dma related that's purely cleanup from the great header reorg of 2012. > > + > > > > #include "davinci.h" > > #include "clock.h" > > @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = { > > }, > > /* DMA channels: RX, then TX */ > > { > > - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), > > + .start = EDMA_CTLR_CHAN(0, 26), > > Instead of just replacing the event #defines with plain numbers, can you > introduce a mach-davinci local edma.h which can then be included in the > davinci platform files which refer to edma channel numbers? Ok, so when I removed the old edma.h it was full of unused defines and we are left with just this one. If I introduced something like that it would be used in just one place here. and only for these two values. How about we just add a comment? > > > diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig > > index 7cd56ed..153fab8 100644 > > --- a/arch/arm/plat-omap/Kconfig > > +++ b/arch/arm/plat-omap/Kconfig > > @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS > > select OMAP_DM_TIMER > > select PROC_DEVICETREE if PROC_FS > > select SPARSE_IRQ > > + select TI_PRIV_EDMA > > This hunk does not seem to belong to subject of this patch. Let me reword the subject/description. The idea of this logical chunk was to put everything in place to make it build on OMAP, with the expectation that the build fails without the next patch in the series. > > select USE_OF > > help > > "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" > > > diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h > > new file mode 100644 > > index 0000000..7396f0b3 > > --- /dev/null > > +++ b/include/linux/platform_data/edma.h > > @@ -0,0 +1,198 @@ > > +/* > > + * TI DAVINCI dma definitions > > + * > > + * Copyright (C) 2006-2009 Texas Instruments. > > + * > > + * This program is free software; you can redistribute it and/or modify it > > + * under the terms of the GNU General Public License as published by the > > + * Free Software Foundation; either version 2 of the License, or (at your > > + * option) any later version. > > + * > > + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED > > + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF > > + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN > > + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, > > + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT > > + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF > > + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON > > + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT > > + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF > > + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. > > > + * You should have received a copy of the GNU General Public License along > > + * with this program; if not, write to the Free Software Foundation, Inc., > > + * 675 Mass Ave, Cambridge, MA 02139, USA. > > This part can be dropped, I suppose ;-) Indeed :) -Matt
Matt, Sorry about the late reply. I noticed this mail only after I started to look at v5 of your series :( On 1/11/2013 5:21 AM, Matt Porter wrote: > On Sun, Oct 28, 2012 at 01:47:09PM +0530, Sekhar Nori wrote: >> On 10/18/2012 6:56 PM, Matt Porter wrote: >>> Move mach-davinci/dma.c to common/edma.c so it can be used >>> by OMAP (specifically AM33xx) as well. This just moves the >>> private EDMA API but does not support OMAP. >>> >>> Signed-off-by: Matt Porter <mporter@ti.com> >>> --- >> >>> diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c >>> index 4c48a36..f45d591 100644 >>> --- a/arch/arm/mach-davinci/devices.c >>> +++ b/arch/arm/mach-davinci/devices.c >>> @@ -19,9 +19,10 @@ >>> #include <mach/irqs.h> >>> #include <mach/cputype.h> >>> #include <mach/mux.h> >>> -#include <mach/edma.h> >>> #include <linux/platform_data/mmc-davinci.h> >>> #include <mach/time.h> >>> +#include <linux/platform_data/edma.h> >> >> Can you please introduce a patch to clean this mixture of linux/ and >> mach/ includes? > > Yeah, are you ok with a follow on series to clean all these files? I > don't want to make this series longer with something not dma related > that's purely cleanup from the great header reorg of 2012. Okay. I agree doing this sort of change now will cause merge issues. > >>> + >>> >>> #include "davinci.h" >>> #include "clock.h" >>> @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = { >>> }, >>> /* DMA channels: RX, then TX */ >>> { >>> - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), >>> + .start = EDMA_CTLR_CHAN(0, 26), >> >> Instead of just replacing the event #defines with plain numbers, can you >> introduce a mach-davinci local edma.h which can then be included in the >> davinci platform files which refer to edma channel numbers? > > Ok, so when I removed the old edma.h it was full of unused defines and > we are left with just this one. If I introduced something like that it > would be used in just one place here. and only for these two values. > How about we just add a comment? I prefer adding a local #define in this file. This will keep it consistent with what is done in arch/arm/mach-davinci/dm365.c for example. Same for the change in sound/soc/davinci/davinci-sffsdr.c > >> >>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig >>> index 7cd56ed..153fab8 100644 >>> --- a/arch/arm/plat-omap/Kconfig >>> +++ b/arch/arm/plat-omap/Kconfig >>> @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS >>> select OMAP_DM_TIMER >>> select PROC_DEVICETREE if PROC_FS >>> select SPARSE_IRQ >>> + select TI_PRIV_EDMA >> >> This hunk does not seem to belong to subject of this patch. > > Let me reword the subject/description. The idea of this logical > chunk was to put everything in place to make it build on OMAP, > with the expectation that the build fails without the next patch > in the series. But this will break bisect. With just this patch applied, omap build breaks. Looks like it will be more logical to merge this hunk with 3/14 since that's when you really start using the private DMA support on OMAP platforms. This issue is a must fix IMO. I am ok with the patch otherwise. With these changes done, you can add: Acked-by: Sekhar Nori <nsekhar@ti.com> Thanks, Sekhar
On Tue, Jan 22, 2013 at 03:40:06PM +0000, Sekhar Nori wrote: > Matt, > > Sorry about the late reply. I noticed this mail only after I started to > look at v5 of your series :( Any time is fine! :) > On 1/11/2013 5:21 AM, Matt Porter wrote: > > On Sun, Oct 28, 2012 at 01:47:09PM +0530, Sekhar Nori wrote: > >> On 10/18/2012 6:56 PM, Matt Porter wrote: > >>> Move mach-davinci/dma.c to common/edma.c so it can be used > >>> by OMAP (specifically AM33xx) as well. This just moves the > >>> private EDMA API but does not support OMAP. > >>> > >>> Signed-off-by: Matt Porter <mporter@ti.com> > >>> --- > >> > >>> diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c > >>> index 4c48a36..f45d591 100644 > >>> --- a/arch/arm/mach-davinci/devices.c > >>> +++ b/arch/arm/mach-davinci/devices.c > >>> @@ -19,9 +19,10 @@ > >>> #include <mach/irqs.h> > >>> #include <mach/cputype.h> > >>> #include <mach/mux.h> > >>> -#include <mach/edma.h> > >>> #include <linux/platform_data/mmc-davinci.h> > >>> #include <mach/time.h> > >>> +#include <linux/platform_data/edma.h> > >> > >> Can you please introduce a patch to clean this mixture of linux/ and > >> mach/ includes? > > > > Yeah, are you ok with a follow on series to clean all these files? I > > don't want to make this series longer with something not dma related > > that's purely cleanup from the great header reorg of 2012. > > Okay. I agree doing this sort of change now will cause merge issues. Ok. > > > > >>> + > >>> > >>> #include "davinci.h" > >>> #include "clock.h" > >>> @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = { > >>> }, > >>> /* DMA channels: RX, then TX */ > >>> { > >>> - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), > >>> + .start = EDMA_CTLR_CHAN(0, 26), > >> > >> Instead of just replacing the event #defines with plain numbers, can you > >> introduce a mach-davinci local edma.h which can then be included in the > >> davinci platform files which refer to edma channel numbers? > > > > Ok, so when I removed the old edma.h it was full of unused defines and > > we are left with just this one. If I introduced something like that it > > would be used in just one place here. and only for these two values. > > How about we just add a comment? > > I prefer adding a local #define in this file. This will keep it > consistent with what is done in arch/arm/mach-davinci/dm365.c for > example. Same for the change in sound/soc/davinci/davinci-sffsdr.c Ok, will do. > > > >> > >>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig > >>> index 7cd56ed..153fab8 100644 > >>> --- a/arch/arm/plat-omap/Kconfig > >>> +++ b/arch/arm/plat-omap/Kconfig > >>> @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS > >>> select OMAP_DM_TIMER > >>> select PROC_DEVICETREE if PROC_FS > >>> select SPARSE_IRQ > >>> + select TI_PRIV_EDMA > >> > >> This hunk does not seem to belong to subject of this patch. > > > > Let me reword the subject/description. The idea of this logical > > chunk was to put everything in place to make it build on OMAP, > > with the expectation that the build fails without the next patch > > in the series. > > But this will break bisect. With just this patch applied, omap build > breaks. Looks like it will be more logical to merge this hunk with 3/14 > since that's when you really start using the private DMA support on OMAP > platforms. Ahh, yes,. thanks for pointing that out. I will address it and add your ack. Thanks. > This issue is a must fix IMO. Ok. > I am ok with the patch otherwise. With these changes done, you can add: > > Acked-by: Sekhar Nori <nsekhar@ti.com> > > Thanks, > Sekhar
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 73067ef..23c2343 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -924,6 +924,7 @@ config ARCH_DAVINCI select GENERIC_IRQ_CHIP select HAVE_IDE select NEED_MACH_GPIO_H + select TI_PRIV_EDMA select ZONE_DMA help Support for TI's DaVinci platform. diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 45ceeb0..9e32d0d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -40,3 +40,6 @@ config SHARP_PARAM config SHARP_SCOOP bool + +config TI_PRIV_EDMA + bool diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index e8a4e58..d09a39b 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -13,3 +13,4 @@ obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o +obj-$(CONFIG_TI_PRIV_EDMA) += edma.o diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/common/edma.c similarity index 99% rename from arch/arm/mach-davinci/dma.c rename to arch/arm/common/edma.c index a685e97..4411087 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/common/edma.c @@ -25,7 +25,7 @@ #include <linux/io.h> #include <linux/slab.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> /* Offsets matching "struct edmacc_param" */ #define PARM_OPT 0x00 diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2227eff..97c639e 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o psc.o \ - dma.o usb.o common.o sram.o aemif.o + usb.o common.o sram.o aemif.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index be30997..86f55ba 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -26,12 +26,12 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> #include <mach/irqs.h> -#include <mach/edma.h> #include <mach/mux.h> #include <mach/cp_intc.h> #include <mach/tnetv107x.h> diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 12d544b..d26a6bc 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -23,9 +23,9 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> #include <linux/platform_data/davinci_asp.h> +#include <linux/platform_data/edma.h> #include <linux/platform_data/keyscan-davinci.h> #include <mach/hardware.h> -#include <mach/edma.h> #include <media/davinci/vpfe_capture.h> #include <media/davinci/vpif_types.h> diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c index 29b17f7..59efd7f 100644 --- a/arch/arm/mach-davinci/devices-tnetv107x.c +++ b/arch/arm/mach-davinci/devices-tnetv107x.c @@ -18,10 +18,10 @@ #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/slab.h> +#include <linux/platform_data/edma.h> #include <mach/common.h> #include <mach/irqs.h> -#include <mach/edma.h> #include <mach/tnetv107x.h> #include "clock.h" diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 4c48a36..f45d591 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -19,9 +19,10 @@ #include <mach/irqs.h> #include <mach/cputype.h> #include <mach/mux.h> -#include <mach/edma.h> #include <linux/platform_data/mmc-davinci.h> #include <mach/time.h> +#include <linux/platform_data/edma.h> + #include "davinci.h" #include "clock.h" @@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = { }, /* DMA channels: RX, then TX */ { - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT), + .start = EDMA_CTLR_CHAN(0, 26), .flags = IORESOURCE_DMA, }, { - .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT), + .start = EDMA_CTLR_CHAN(0, 27), .flags = IORESOURCE_DMA, }, }; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a255434..b165c27 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -19,7 +19,6 @@ #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/psc.h> #include <mach/mux.h> #include <mach/irqs.h> @@ -28,6 +27,7 @@ #include <mach/common.h> #include <linux/platform_data/spi-davinci.h> #include <mach/gpio-davinci.h> +#include <linux/platform_data/edma.h> #include "davinci.h" #include "clock.h" diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index b680c83..a611716 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -18,11 +18,11 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/spi/spi.h> +#include <linux/platform_data/edma.h> #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/psc.h> #include <mach/mux.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1..90f5639 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -12,11 +12,11 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/irqs.h> #include <mach/psc.h> #include <mach/mux.h> diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 97c0f8e..08f9dab 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -13,11 +13,11 @@ #include <linux/clk.h> #include <linux/serial_8250.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <asm/mach/map.h> #include <mach/cputype.h> -#include <mach/edma.h> #include <mach/irqs.h> #include <mach/psc.h> #include <mach/mux.h> diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aaccdc4..4380691 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -20,8 +20,8 @@ #include <linux/videodev2.h> #include <mach/serial.h> -#include <mach/edma.h> #include <mach/pm.h> +#include <linux/platform_data/edma.h> #include <linux/platform_data/i2c-davinci.h> #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h deleted file mode 100644 index 7e84c90..0000000 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ /dev/null @@ -1,267 +0,0 @@ -/* - * TI DAVINCI dma definitions - * - * Copyright (C) 2006-2009 Texas Instruments. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -/* - * This EDMA3 programming framework exposes two basic kinds of resource: - * - * Channel Triggers transfers, usually from a hardware event but - * also manually or by "chaining" from DMA completions. - * Each channel is coupled to a Parameter RAM (PaRAM) slot. - * - * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM - * "set"), source and destination addresses, a link to a - * next PaRAM slot (if any), options for the transfer, and - * instructions for updating those addresses. There are - * more than twice as many slots as event channels. - * - * Each PaRAM set describes a sequence of transfers, either for one large - * buffer or for several discontiguous smaller buffers. An EDMA transfer - * is driven only from a channel, which performs the transfers specified - * in its PaRAM slot until there are no more transfers. When that last - * transfer completes, the "link" field may be used to reload the channel's - * PaRAM slot with a new transfer descriptor. - * - * The EDMA Channel Controller (CC) maps requests from channels into physical - * Transfer Controller (TC) requests when the channel triggers (by hardware - * or software events, or by chaining). The two physical DMA channels provided - * by the TCs are thus shared by many logical channels. - * - * DaVinci hardware also has a "QDMA" mechanism which is not currently - * supported through this interface. (DSP firmware uses it though.) - */ - -#ifndef EDMA_H_ -#define EDMA_H_ - -/* PaRAM slots are laid out like this */ -struct edmacc_param { - unsigned int opt; - unsigned int src; - unsigned int a_b_cnt; - unsigned int dst; - unsigned int src_dst_bidx; - unsigned int link_bcntrld; - unsigned int src_dst_cidx; - unsigned int ccnt; -}; - -#define CCINT0_INTERRUPT 16 -#define CCERRINT_INTERRUPT 17 -#define TCERRINT0_INTERRUPT 18 -#define TCERRINT1_INTERRUPT 19 - -/* fields in edmacc_param.opt */ -#define SAM BIT(0) -#define DAM BIT(1) -#define SYNCDIM BIT(2) -#define STATIC BIT(3) -#define EDMA_FWID (0x07 << 8) -#define TCCMODE BIT(11) -#define EDMA_TCC(t) ((t) << 12) -#define TCINTEN BIT(20) -#define ITCINTEN BIT(21) -#define TCCHEN BIT(22) -#define ITCCHEN BIT(23) - -#define TRWORD (0x7<<2) -#define PAENTRY (0x1ff<<5) - -/* Drivers should avoid using these symbolic names for dm644x - * channels, and use platform_device IORESOURCE_DMA resources - * instead. (Other DaVinci chips have different peripherals - * and thus have different DMA channel mappings.) - */ -#define DAVINCI_DMA_MCBSP_TX 2 -#define DAVINCI_DMA_MCBSP_RX 3 -#define DAVINCI_DMA_VPSS_HIST 4 -#define DAVINCI_DMA_VPSS_H3A 5 -#define DAVINCI_DMA_VPSS_PRVU 6 -#define DAVINCI_DMA_VPSS_RSZ 7 -#define DAVINCI_DMA_IMCOP_IMXINT 8 -#define DAVINCI_DMA_IMCOP_VLCDINT 9 -#define DAVINCI_DMA_IMCO_PASQINT 10 -#define DAVINCI_DMA_IMCOP_DSQINT 11 -#define DAVINCI_DMA_SPI_SPIX 16 -#define DAVINCI_DMA_SPI_SPIR 17 -#define DAVINCI_DMA_UART0_URXEVT0 18 -#define DAVINCI_DMA_UART0_UTXEVT0 19 -#define DAVINCI_DMA_UART1_URXEVT1 20 -#define DAVINCI_DMA_UART1_UTXEVT1 21 -#define DAVINCI_DMA_UART2_URXEVT2 22 -#define DAVINCI_DMA_UART2_UTXEVT2 23 -#define DAVINCI_DMA_MEMSTK_MSEVT 24 -#define DAVINCI_DMA_MMCRXEVT 26 -#define DAVINCI_DMA_MMCTXEVT 27 -#define DAVINCI_DMA_I2C_ICREVT 28 -#define DAVINCI_DMA_I2C_ICXEVT 29 -#define DAVINCI_DMA_GPIO_GPINT0 32 -#define DAVINCI_DMA_GPIO_GPINT1 33 -#define DAVINCI_DMA_GPIO_GPINT2 34 -#define DAVINCI_DMA_GPIO_GPINT3 35 -#define DAVINCI_DMA_GPIO_GPINT4 36 -#define DAVINCI_DMA_GPIO_GPINT5 37 -#define DAVINCI_DMA_GPIO_GPINT6 38 -#define DAVINCI_DMA_GPIO_GPINT7 39 -#define DAVINCI_DMA_GPIO_GPBNKINT0 40 -#define DAVINCI_DMA_GPIO_GPBNKINT1 41 -#define DAVINCI_DMA_GPIO_GPBNKINT2 42 -#define DAVINCI_DMA_GPIO_GPBNKINT3 43 -#define DAVINCI_DMA_GPIO_GPBNKINT4 44 -#define DAVINCI_DMA_TIMER0_TINT0 48 -#define DAVINCI_DMA_TIMER1_TINT1 49 -#define DAVINCI_DMA_TIMER2_TINT2 50 -#define DAVINCI_DMA_TIMER3_TINT3 51 -#define DAVINCI_DMA_PWM0 52 -#define DAVINCI_DMA_PWM1 53 -#define DAVINCI_DMA_PWM2 54 - -/* DA830 specific EDMA3 information */ -#define EDMA_DA830_NUM_DMACH 32 -#define EDMA_DA830_NUM_TCC 32 -#define EDMA_DA830_NUM_PARAMENTRY 128 -#define EDMA_DA830_NUM_EVQUE 2 -#define EDMA_DA830_NUM_TC 2 -#define EDMA_DA830_CHMAP_EXIST 0 -#define EDMA_DA830_NUM_REGIONS 4 -#define DA830_DMACH2EVENT_MAP0 0x000FC03Fu -#define DA830_DMACH2EVENT_MAP1 0x00000000u -#define DA830_EDMA_ARM_OWN 0x30FFCCFFu - -/*ch_status paramater of callback function possible values*/ -#define DMA_COMPLETE 1 -#define DMA_CC_ERROR 2 -#define DMA_TC1_ERROR 3 -#define DMA_TC2_ERROR 4 - -enum address_mode { - INCR = 0, - FIFO = 1 -}; - -enum fifo_width { - W8BIT = 0, - W16BIT = 1, - W32BIT = 2, - W64BIT = 3, - W128BIT = 4, - W256BIT = 5 -}; - -enum dma_event_q { - EVENTQ_0 = 0, - EVENTQ_1 = 1, - EVENTQ_2 = 2, - EVENTQ_3 = 3, - EVENTQ_DEFAULT = -1 -}; - -enum sync_dimension { - ASYNC = 0, - ABSYNC = 1 -}; - -#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) -#define EDMA_CTLR(i) ((i) >> 16) -#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) - -#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ -#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ -#define EDMA_CONT_PARAMS_ANY 1001 -#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 -#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 - -#define EDMA_MAX_CC 2 - -/* alloc/free DMA channels and their dedicated parameter RAM slots */ -int edma_alloc_channel(int channel, - void (*callback)(unsigned channel, u16 ch_status, void *data), - void *data, enum dma_event_q); -void edma_free_channel(unsigned channel); - -/* alloc/free parameter RAM slots */ -int edma_alloc_slot(unsigned ctlr, int slot); -void edma_free_slot(unsigned slot); - -/* alloc/free a set of contiguous parameter RAM slots */ -int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); -int edma_free_cont_slots(unsigned slot, int count); - -/* calls that operate on part of a parameter RAM slot */ -void edma_set_src(unsigned slot, dma_addr_t src_port, - enum address_mode mode, enum fifo_width); -void edma_set_dest(unsigned slot, dma_addr_t dest_port, - enum address_mode mode, enum fifo_width); -void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); -void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); -void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); -void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, - u16 bcnt_rld, enum sync_dimension sync_mode); -void edma_link(unsigned from, unsigned to); -void edma_unlink(unsigned from); - -/* calls that operate on an entire parameter RAM slot */ -void edma_write_slot(unsigned slot, const struct edmacc_param *params); -void edma_read_slot(unsigned slot, struct edmacc_param *params); - -/* channel control operations */ -int edma_start(unsigned channel); -void edma_stop(unsigned channel); -void edma_clean_channel(unsigned channel); -void edma_clear_event(unsigned channel); -void edma_pause(unsigned channel); -void edma_resume(unsigned channel); - -struct edma_rsv_info { - - const s16 (*rsv_chans)[2]; - const s16 (*rsv_slots)[2]; -}; - -/* platform_data for EDMA driver */ -struct edma_soc_info { - - /* how many dma resources of each type */ - unsigned n_channel; - unsigned n_region; - unsigned n_slot; - unsigned n_tc; - unsigned n_cc; - /* - * Default queue is expected to be a low-priority queue. - * This way, long transfers on the default queue started - * by the codec engine will not cause audio defects. - */ - enum dma_event_q default_queue; - - /* Resource reservation for other cores */ - struct edma_rsv_info *rsv; - - const s8 (*queue_tc_mapping)[2]; - const s8 (*queue_priority_mapping)[2]; -}; - -#endif diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 7cd56ed..153fab8 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -28,6 +28,7 @@ config ARCH_OMAP2PLUS select OMAP_DM_TIMER select PROC_DEVICETREE if PROC_FS select SPARSE_IRQ + select TI_PRIV_EDMA select USE_OF help "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5" diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index fdcf079..47ba7bf 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -24,7 +24,7 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> #include "dmaengine.h" #include "virt-dma.h" diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 2063677..f5d46ea 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -35,6 +35,7 @@ #include <linux/edma.h> #include <linux/mmc/mmc.h> +#include <linux/platform_data/edma.h> #include <linux/platform_data/mmc-davinci.h> /* diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h index 0ab6132..7dd6524 100644 --- a/include/linux/mfd/davinci_voicecodec.h +++ b/include/linux/mfd/davinci_voicecodec.h @@ -26,8 +26,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/mfd/core.h> - -#include <mach/edma.h> +#include <linux/platform_data/edma.h> /* * Register values. diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h new file mode 100644 index 0000000..7396f0b3 --- /dev/null +++ b/include/linux/platform_data/edma.h @@ -0,0 +1,198 @@ +/* + * TI DAVINCI dma definitions + * + * Copyright (C) 2006-2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * This EDMA3 programming framework exposes two basic kinds of resource: + * + * Channel Triggers transfers, usually from a hardware event but + * also manually or by "chaining" from DMA completions. + * Each channel is coupled to a Parameter RAM (PaRAM) slot. + * + * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM + * "set"), source and destination addresses, a link to a + * next PaRAM slot (if any), options for the transfer, and + * instructions for updating those addresses. There are + * more than twice as many slots as event channels. + * + * Each PaRAM set describes a sequence of transfers, either for one large + * buffer or for several discontiguous smaller buffers. An EDMA transfer + * is driven only from a channel, which performs the transfers specified + * in its PaRAM slot until there are no more transfers. When that last + * transfer completes, the "link" field may be used to reload the channel's + * PaRAM slot with a new transfer descriptor. + * + * The EDMA Channel Controller (CC) maps requests from channels into physical + * Transfer Controller (TC) requests when the channel triggers (by hardware + * or software events, or by chaining). The two physical DMA channels provided + * by the TCs are thus shared by many logical channels. + * + * DaVinci hardware also has a "QDMA" mechanism which is not currently + * supported through this interface. (DSP firmware uses it though.) + */ + +#ifndef EDMA_H_ +#define EDMA_H_ + +/* PaRAM slots are laid out like this */ +struct edmacc_param { + unsigned int opt; + unsigned int src; + unsigned int a_b_cnt; + unsigned int dst; + unsigned int src_dst_bidx; + unsigned int link_bcntrld; + unsigned int src_dst_cidx; + unsigned int ccnt; +}; + +/* fields in edmacc_param.opt */ +#define SAM BIT(0) +#define DAM BIT(1) +#define SYNCDIM BIT(2) +#define STATIC BIT(3) +#define EDMA_FWID (0x07 << 8) +#define TCCMODE BIT(11) +#define EDMA_TCC(t) ((t) << 12) +#define TCINTEN BIT(20) +#define ITCINTEN BIT(21) +#define TCCHEN BIT(22) +#define ITCCHEN BIT(23) + +/*ch_status paramater of callback function possible values*/ +#define DMA_COMPLETE 1 +#define DMA_CC_ERROR 2 +#define DMA_TC1_ERROR 3 +#define DMA_TC2_ERROR 4 + +enum address_mode { + INCR = 0, + FIFO = 1 +}; + +enum fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum dma_event_q { + EVENTQ_0 = 0, + EVENTQ_1 = 1, + EVENTQ_2 = 2, + EVENTQ_3 = 3, + EVENTQ_DEFAULT = -1 +}; + +enum sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan)) +#define EDMA_CTLR(i) ((i) >> 16) +#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) + +#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */ +#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */ +#define EDMA_CONT_PARAMS_ANY 1001 +#define EDMA_CONT_PARAMS_FIXED_EXACT 1002 +#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003 + +#define EDMA_MAX_CC 2 + +/* alloc/free DMA channels and their dedicated parameter RAM slots */ +int edma_alloc_channel(int channel, + void (*callback)(unsigned channel, u16 ch_status, void *data), + void *data, enum dma_event_q); +void edma_free_channel(unsigned channel); + +/* alloc/free parameter RAM slots */ +int edma_alloc_slot(unsigned ctlr, int slot); +void edma_free_slot(unsigned slot); + +/* alloc/free a set of contiguous parameter RAM slots */ +int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count); +int edma_free_cont_slots(unsigned slot, int count); + +/* calls that operate on part of a parameter RAM slot */ +void edma_set_src(unsigned slot, dma_addr_t src_port, + enum address_mode mode, enum fifo_width); +void edma_set_dest(unsigned slot, dma_addr_t dest_port, + enum address_mode mode, enum fifo_width); +void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst); +void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx); +void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx); +void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt, + u16 bcnt_rld, enum sync_dimension sync_mode); +void edma_link(unsigned from, unsigned to); +void edma_unlink(unsigned from); + +/* calls that operate on an entire parameter RAM slot */ +void edma_write_slot(unsigned slot, const struct edmacc_param *params); +void edma_read_slot(unsigned slot, struct edmacc_param *params); + +/* channel control operations */ +int edma_start(unsigned channel); +void edma_stop(unsigned channel); +void edma_clean_channel(unsigned channel); +void edma_clear_event(unsigned channel); +void edma_pause(unsigned channel); +void edma_resume(unsigned channel); + +struct edma_rsv_info { + + const s16 (*rsv_chans)[2]; + const s16 (*rsv_slots)[2]; +}; + +/* platform_data for EDMA driver */ +struct edma_soc_info { + + /* how many dma resources of each type */ + unsigned n_channel; + unsigned n_region; + unsigned n_slot; + unsigned n_tc; + unsigned n_cc; + /* + * Default queue is expected to be a low-priority queue. + * This way, long transfers on the default queue started + * by the codec engine will not cause audio defects. + */ + enum dma_event_q default_queue; + + /* Resource reservation for other cores */ + struct edma_rsv_info *rsv; + + const s8 (*queue_tc_mapping)[2]; + const s8 (*queue_priority_mapping)[2]; +}; + +#endif diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h index 7af305b..8dc2fa47 100644 --- a/include/linux/platform_data/spi-davinci.h +++ b/include/linux/platform_data/spi-davinci.h @@ -19,7 +19,7 @@ #ifndef __ARCH_ARM_DAVINCI_SPI_H #define __ARCH_ARM_DAVINCI_SPI_H -#include <mach/edma.h> +#include <linux/platform_data/edma.h> #define SPI_INTERN_CS 0xFF diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c index 6fac5af..44365d5 100644 --- a/sound/soc/davinci/davinci-evm.c +++ b/sound/soc/davinci/davinci-evm.c @@ -14,6 +14,7 @@ #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <linux/i2c.h> #include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c index 93ea3bf..c9d1b7a 100644 --- a/sound/soc/davinci/davinci-pcm.c +++ b/sound/soc/davinci/davinci-pcm.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/kernel.h> +#include <linux/platform_data/edma.h> #include <sound/core.h> #include <sound/pcm.h> diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h index fc4d01c..deab6c3 100644 --- a/sound/soc/davinci/davinci-pcm.h +++ b/sound/soc/davinci/davinci-pcm.h @@ -13,7 +13,7 @@ #define _DAVINCI_PCM_H #include <linux/platform_data/davinci_asp.h> -#include <mach/edma.h> +#include <linux/platform_data/edma.h> struct davinci_pcm_dma_params { int channel; /* sync dma channel ID */ diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c index 5be65aa..5345e63 100644 --- a/sound/soc/davinci/davinci-sffsdr.c +++ b/sound/soc/davinci/davinci-sffsdr.c @@ -17,6 +17,7 @@ #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/platform_data/edma.h> #include <linux/gpio.h> #include <sound/core.h> #include <sound/pcm.h> @@ -28,7 +29,6 @@ #include <asm/plat-sffsdr/sffsdr-fpga.h> #endif -#include <mach/edma.h> #include "../codecs/pcm3008.h" #include "davinci-pcm.h" @@ -123,8 +123,8 @@ static struct resource sffsdr_snd_resources[] = { }; static struct evm_snd_platform_data sffsdr_snd_data = { - .tx_dma_ch = DAVINCI_DMA_MCBSP_TX, - .rx_dma_ch = DAVINCI_DMA_MCBSP_RX, + .tx_dma_ch = 2, + .rx_dma_ch = 3, }; static struct platform_device *sffsdr_snd_device;
Move mach-davinci/dma.c to common/edma.c so it can be used by OMAP (specifically AM33xx) as well. This just moves the private EDMA API but does not support OMAP. Signed-off-by: Matt Porter <mporter@ti.com> --- arch/arm/Kconfig | 1 + arch/arm/common/Kconfig | 3 + arch/arm/common/Makefile | 1 + arch/arm/{mach-davinci/dma.c => common/edma.c} | 2 +- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +- arch/arm/mach-davinci/davinci.h | 2 +- arch/arm/mach-davinci/devices-tnetv107x.c | 2 +- arch/arm/mach-davinci/devices.c | 7 +- arch/arm/mach-davinci/dm355.c | 2 +- arch/arm/mach-davinci/dm365.c | 2 +- arch/arm/mach-davinci/dm644x.c | 2 +- arch/arm/mach-davinci/dm646x.c | 2 +- arch/arm/mach-davinci/include/mach/da8xx.h | 2 +- arch/arm/mach-davinci/include/mach/edma.h | 267 ------------------------ arch/arm/plat-omap/Kconfig | 1 + drivers/dma/edma.c | 2 +- drivers/mmc/host/davinci_mmc.c | 1 + include/linux/mfd/davinci_voicecodec.h | 3 +- include/linux/platform_data/edma.h | 198 ++++++++++++++++++ include/linux/platform_data/spi-davinci.h | 2 +- sound/soc/davinci/davinci-evm.c | 1 + sound/soc/davinci/davinci-pcm.c | 1 + sound/soc/davinci/davinci-pcm.h | 2 +- sound/soc/davinci/davinci-sffsdr.c | 6 +- 25 files changed, 228 insertions(+), 288 deletions(-) rename arch/arm/{mach-davinci/dma.c => common/edma.c} (99%) delete mode 100644 arch/arm/mach-davinci/include/mach/edma.h create mode 100644 include/linux/platform_data/edma.h